CSIT-618 Add LaTeX support to release report

- Add option to generate PDF from release report.
- Conditional content
- Static plot conversion

Change-Id: I7c4f0b41898791d1cab446d0fc3b07220380e1b8
Signed-off-by: Peter Mikus <pmikus@cisco.com>

7 files changed, 620 insertions, 54 deletions

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
index 5f35db1248..6596f69e71 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst
@@ -17,13 +17,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc}
+            \label{fig:64B-1t1c-ethip4-ip4-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -32,14 +50,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc}
+            \label{fig:64B-2t2c-ethip4-ip4-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc}
+            \label{fig:64B-1t1c-ethip4-ip4-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -67,12 +121,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc}
+            \label{fig:64B-2t2c-ethip4-ip4-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
 
+      $ cd tests/vpp/perf/ip4
+      $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
index 43fef1a20c..71dc06e9b3 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst
@@ -17,14 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ndrdisc}
+            \label{fig:64B-1t1c-ethip4-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -33,13 +51,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ndrdisc}
+            \label{fig:64B-2t2c-ethip4-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-pdrdisc}
+            \label{fig:64B-1t1c-ethip4-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -67,11 +121,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-pdrdisc}
+            \label{fig:64B-2t2c-ethip4-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
 
+      $ cd tests/vpp/perf/ip4_tunnels
+      $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
index 9a756f6d42..959559c407 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst
@@ -17,14 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -33,14 +51,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-ndrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -52,14 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-1t1c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,11 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-pdrdisc}
+            \label{fig:78B-2t2c-ethip6-ip6-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6
 Routed-Forwarding.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6
+      $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
index ca38658430..fa37b85155 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst
@@ -17,14 +17,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ndrdisc}
+            \label{fig:78B-1t1c-ethip6-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6_tunnels
+      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -33,14 +51,32 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ndrdisc}
+            \label{fig:78B-2t2c-ethip6-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6_tunnels
+      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -52,14 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-pdrdisc}
+            \label{fig:78B-1t1c-ethip6-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6_tunnels
+      $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
 
 VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,11 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-pdrdisc}
+            \label{fig:78B-2t2c-ethip6-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay
 Tunnels.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/ip6_tunnels
+      $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index eba3a40e87..b59a521227 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -20,13 +20,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-ndrdisc}
+            \label{fig:64B-1t1c-ipsechw-ndrdisc}
+    \end{figure}
+
 *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -35,13 +53,31 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-ndrdisc}
+            \label{fig:64B-2t2c-ipsechw-ndrdisc}
+    \end{figure}
+
 *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -53,13 +89,31 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-pdrdisc}
+            \label{fig:64B-1t1c-ipsechw-pdrdisc}
+    \end{figure}
+
 *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -68,10 +122,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-pdrdisc}
+            \label{fig:64B-2t2c-ipsechw-pdrdisc}
+    \end{figure}
+
 *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/crypto
+      $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
index 47e3400840..46c9500a11 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
@@ -17,6 +17,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc}
+            \label{fig:64B-1t1c-l2-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -24,14 +33,32 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc}
+            \label{fig:64B-1t1c-l2-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -40,6 +67,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc}
+            \label{fig:64B-2t2c-l2-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -47,14 +83,33 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc}
+            \label{fig:64B-2t2c-l2-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -66,6 +121,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc}
+            \label{fig:64B-1t1c-l2-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -73,14 +137,32 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc}
+            \label{fig:64B-1t1c-l2-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -89,6 +171,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc}
+            \label{fig:64B-2t2c-l2-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -96,5 +187,14 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc}
+            \label{fig:64B-2t2c-l2-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
index bd1ef791a3..952e37cb69 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst
@@ -18,6 +18,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel1-ndrdisc}
+            \label{fig:64B-1t1c-vhost-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user
 selected TCs.*
 
@@ -25,14 +34,32 @@ selected TCs.*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel2-ndrdisc}
+            \label{fig:64B-1t1c-vhost-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/vm_vhost
+      $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -41,6 +68,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel1-ndrdisc}
+            \label{fig:64B-2t2c-vhost-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
@@ -48,14 +84,32 @@ vhost-user selected TCs.*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel2-ndrdisc}
+            \label{fig:64B-2t2c-vhost-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/vm_vhost
+      $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" *
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -67,6 +121,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel1-pdrdisc}
+            \label{fig:64B-1t1c-vhost-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
@@ -74,14 +137,32 @@ vhost-user selected TCs.*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel2-pdrdisc}
+            \label{fig:64B-1t1c-vhost-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/vm_vhost
+      $ grep -E "64B-1t1c-.*vhost.*-pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -90,6 +171,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel1-pdrdisc}
+            \label{fig:64B-2t2c-vhost-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
@@ -97,11 +187,29 @@ vhost-user selected TCs.*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel2-pdrdisc}
+            \label{fig:64B-2t2c-vhost-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM
 vhost-user selected TCs.*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/vm_vhost
+      $ grep -E "64B-2t2c-.*vhost.*-pdrdisc" *