aboutsummaryrefslogtreecommitdiffstats
path: root/docs/report
diff options
context:
space:
mode:
authorMaciek Konstantynowicz <mkonstan@cisco.com>2018-08-14 15:50:51 +0100
committerMaciek Konstantynowicz <mkonstan@cisco.com>2018-08-14 18:49:13 +0000
commitab0b18bf513bb292b5d24d2eb339c2dddfbcd955 (patch)
treea2bec78f4078697aa4ebf1853d0a50aed4f9750c /docs/report
parent9b23b0e91b666274974173a4c0d942de8a51b920 (diff)
rls1807: updated environment sections for all functional tests.
Change-Id: I8f0a2a49ee6e75990ee4638543259c40d1fb5d67 Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'docs/report')
-rw-r--r--docs/report/dmm_functional_tests/test_environment.rst8
-rw-r--r--docs/report/dpdk_performance_tests/test_environment.rst28
-rw-r--r--docs/report/honeycomb_functional_tests/test_environment.rst6
-rw-r--r--docs/report/nsh_sfc_functional_tests/test_environment.rst8
-rw-r--r--docs/report/vpp_functional_tests/test_environment.rst114
-rw-r--r--docs/report/vpp_performance_tests/test_environment.rst2
6 files changed, 98 insertions, 68 deletions
diff --git a/docs/report/dmm_functional_tests/test_environment.rst b/docs/report/dmm_functional_tests/test_environment.rst
index 3b35fd432f..72026f13a9 100644
--- a/docs/report/dmm_functional_tests/test_environment.rst
+++ b/docs/report/dmm_functional_tests/test_environment.rst
@@ -1 +1,7 @@
-.. include:: ../vpp_functional_tests/test_environment.rst
+Test Environment
+================
+
+FD.io CSIT DMM functional tests are executed in the same FD.io VIRL
+virtual environment as used CSIT VPP functional tests. See description
+in `VPP Functional Tests Environment
+<../vpp_functional_tests/test_environment.html>`_. \ No newline at end of file
diff --git a/docs/report/dpdk_performance_tests/test_environment.rst b/docs/report/dpdk_performance_tests/test_environment.rst
index 2257b96b1c..175c3efcf5 100644
--- a/docs/report/dpdk_performance_tests/test_environment.rst
+++ b/docs/report/dpdk_performance_tests/test_environment.rst
@@ -10,34 +10,38 @@
.. include:: ../introduction/test_environment_sut_conf_3.rst
-DUT Configuration - DPDK
-------------------------
+DUT Settings - DPDK
+-------------------
-**DPDK Version**
+DPDK Version
+~~~~~~~~~~~~
|dpdk-release|
-**DPDK Compile Parameters**
+DPDK Compile Parameters
+~~~~~~~~~~~~~~~~~~~~~~~
.. code-block:: bash
make install T=x86_64-native-linuxapp-gcc -j
-**Testpmd Startup Configuration**
+Testpmd Startup Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Testpmd startup configuration changes per test case with different settings for
-`$$CORES`, `$$RXQ` and max-pkt-len parameter if test is sending jumbo frames.
-Startup command template:
+Testpmd startup configuration changes per test case with different
+settings for `$$CORES`, `$$RXQ` and max-pkt-len parameter if test is
+sending jumbo frames. Startup command template:
.. code-block:: bash
testpmd -c $$CORE_MASK -n 4 -- --numa --nb-ports=2 --portmask=0x3 --nb-cores=$$CORES --max-pkt-len=9000 --txqflags=0 --forward-mode=io --rxq=$$RXQ --txq=$$TXQ --burst=64 --rxd=1024 --txd=1024 --disable-link-check --auto-start
-**L3FWD Startup Configuration**
+L3FWD Startup Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
-L3FWD startup configuration changes per test case with different settings for
-`$$CORES` and enable-jumbo parameter if test is sending jumbo frames.
-Startup command template:
+L3FWD startup configuration changes per test case with different
+settings for `$$CORES` and enable-jumbo parameter if test is sending
+jumbo frames. Startup command template:
.. code-block:: bash
diff --git a/docs/report/honeycomb_functional_tests/test_environment.rst b/docs/report/honeycomb_functional_tests/test_environment.rst
index 8d8d832e92..c0e13b5423 100644
--- a/docs/report/honeycomb_functional_tests/test_environment.rst
+++ b/docs/report/honeycomb_functional_tests/test_environment.rst
@@ -1,5 +1,7 @@
Test Environment
================
-CSIT functional tests are currently executed in FD.IO VIRL testbed.
-See `VPP Functional Tests Environment <../vpp_functional_tests/test_environment.html>`_ for more details.
+FD.io CSIT HoneyComb functional tests are executed in the same FD.io
+virtual environment as used CSIT VPP functional tests. See description
+in `VPP Functional Tests Environment
+<../vpp_functional_tests/test_environment.html>`_.
diff --git a/docs/report/nsh_sfc_functional_tests/test_environment.rst b/docs/report/nsh_sfc_functional_tests/test_environment.rst
index 3b35fd432f..68ac5f208a 100644
--- a/docs/report/nsh_sfc_functional_tests/test_environment.rst
+++ b/docs/report/nsh_sfc_functional_tests/test_environment.rst
@@ -1 +1,7 @@
-.. include:: ../vpp_functional_tests/test_environment.rst
+Test Environment
+================
+
+FD.io CSIT NSH_SFC functional tests are executed in the same FD.io VIRL
+virtual environment as used CSIT VPP functional tests. See description
+in `VPP Functional Tests Environment
+<../vpp_functional_tests/test_environment.html>`_.
diff --git a/docs/report/vpp_functional_tests/test_environment.rst b/docs/report/vpp_functional_tests/test_environment.rst
index 9907264aa4..1d00263ab8 100644
--- a/docs/report/vpp_functional_tests/test_environment.rst
+++ b/docs/report/vpp_functional_tests/test_environment.rst
@@ -1,70 +1,71 @@
Test Environment
================
-CSIT functional tests are currently executed in FD.IO VIRL testbed. The physical
-VIRL testbed infrastructure consists of three VIRL hosts:
-
-- All hosts are Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @2.30GHz,
- 18c, 512GB RAM)
+CSIT VPP functional tests are executed in FD.io VIRL testbeds. The
+physical VIRL testbed infrastructure consists of three VIRL servers:
- tb4-virl1:
- Status: Production
- OS: Ubuntu 16.04.2
- - STD server version 0.10.32.16
- - UWM server version 0.10.32.16
+ - VIRL STD server version: 0.10.32.16
+ - VIRL UWM server version: 0.10.32.16
- tb4-virl2:
- Status: Production
- OS: Ubuntu 16.04.2
- - STD server version 0.10.32.16
- - UWM server version 0.10.32.16
+ - VIRL STD server version: 0.10.32.16
+ - VIRL UWM server version: 0.10.32.16
- tb4-virl3:
- - Status: Testing
+ - Status: Production
- OS: Ubuntu 16.04.2
- - STD server version 0.10.32.19
- - UWM server version 0.10.32.19
+ - VIRL STD server version: 0.10.32.19
+ - VIRL UWM server version: 0.10.32.19
+
+- VIRL hosts: Cisco UCS C240-M4, each with 2x Intel Xeon E5-2699
+ v3 (2.30 GHz, 18c), 512GB RAM.
-Whenever a patch is submitted to gerrit for review, parallel VIRL simulations
-are started to reduce the time of execution of all functional tests. The number
-of parallel VIRL simulations is equal to number of test groups defined by
-TEST_GROUPS variable in :file:`csit/bootstrap.sh` file. The VIRL host to run
-VIRL simulation is selected based on least load algorithm per VIRL simulation.
+Whenever a patch is submitted to gerrit for review, parallel VIRL
+simulations are started to reduce the time of execution of all
+functional tests. The number of parallel VIRL simulations is equal to a
+number of test groups defined by TEST_GROUPS variable in
+:file:`csit/bootstrap.sh` file. VIRL host to run VIRL simulation is
+selected based on least load algorithm per VIRL simulation.
-Every VIRL simulation uses the same three-node - Traffic Generator (TG node) and
-two Systems Under Test (SUT1 and SUT2) - "double-ring" topology. The appropriate
-pre-built VPP packages built by Jenkins for the patch under review are then
-installed on the two SUTs, along with their :file:`/etc/vpp/startup.conf` file,
-in all VIRL simulations.
+Every VIRL simulation uses the same three-node logical ring topology -
+Traffic Generator (TG node) and two Systems Under Test (SUT1 and SUT2).
+The appropriate pre-built VPP packages built by Jenkins for the patch
+under review are then installed on the two SUTs, along with their
+:file:`/etc/vpp/startup.conf` file, in all VIRL simulations.
-SUT Configuration - VIRL Guest VM
----------------------------------
+SUT Settings - VIRL Guest VM
+----------------------------
-Configurations of the SUT VMs is defined in `VIRL topologies directory`_
+SUT VMs' settings are defined in `VIRL topologies directory`_
-- List of SUT VM interfaces:::
+- List of SUT VM interfaces:
<interface id="0" name="GigabitEthernet0/4/0"/>
<interface id="1" name="GigabitEthernet0/5/0"/>
<interface id="2" name="GigabitEthernet0/6/0"/>
<interface id="3" name="GigabitEthernet0/7/0"/>
-- Number of 2MB hugepages: 1024
+- Number of 2MB hugepages: 1024.
-- Maximum number of memory map areas: 20000
+- Maximum number of memory map areas: 20000.
-- Kernel Shared Memory Max: 2147483648 (vm.nr_hugepages * 2 * 1024 * 1024)
+- Kernel Shared Memory Max: 2147483648 (vm.nr_hugepages * 2 * 1024 * 1024).
-SUT Configuration - VIRL Guest OS Linux
----------------------------------------
+SUT Settings - VIRL Guest OS Linux
+----------------------------------
In CSIT terminology, the VM operating system for both SUTs that |vpp-release| has
been tested with, is the following:
-#. **Ubuntu VIRL image**
+#. Ubuntu VIRL image
This image implies Ubuntu 16.04.1 LTS, current as of yyyy-mm-dd (that is,
package versions are those that would have been installed by a
@@ -77,7 +78,7 @@ been tested with, is the following:
A replica of this VM image can be built by running the :command:`build.sh`
script in CSIT repository.
-#. **CentOS VIRL image**
+#. CentOS VIRL image
This image implies Centos 7.4-1711, current as of yyyy-mm-dd (that is,
package versions are those that would have been installed by a
@@ -90,7 +91,7 @@ been tested with, is the following:
A replica of this VM image can be built by running the :command:`build.sh`
script in CSIT repository.
-#. **Nested VM image**
+#. Nested VM image
In addition to the "main" VM image, tests which require VPP to communicate to
a VM over a vhost-user interface, utilize a "nested" VM image.
@@ -104,18 +105,19 @@ been tested with, is the following:
"nested" image are included in CSIT GIT repository, and the image can be
rebuilt using the "build.sh" script at `VIRL nested`_.
-DUT Configuration - VPP
------------------------
+DUT Settings - VPP
+------------------
Every System Under Test runs VPP SW application in Linux user-mode as a Device
Under Test (DUT) node.
-**DUT port configuration**
+DUT Port Configuration
+~~~~~~~~~~~~~~~~~~~~~~
Port configuration of DUTs is defined in topology file that is generated per
VIRL simulation based on the definition stored in `VIRL topologies directory`_.
-Example of DUT nodes configuration:::
+Example of DUT nodes configuration:
DUT1:
type: DUT
@@ -230,11 +232,14 @@ Example of DUT nodes configuration:::
pci_address: "0000:00:07.0"
link: link6
-**VPP Version**
+VPP Version
+~~~~~~~~~~~
|vpp-release|
-**VPP Installed Packages - Ubuntu**
+VPP Installed Packages - Ubuntu
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
::
$ dpkg -l vpp\*
@@ -250,7 +255,10 @@ Example of DUT nodes configuration:::
ii vpp-lib 18.07-release amd64 Vector Packet Processing--runtime libraries
ii vpp-plugins 18.07-release amd64 Vector Packet Processing--runtime plugins
-**VPP Installed Packages - Centos**
+
+VPP Installed Packages - Centos
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
::
$ rpm -qai vpp*
@@ -350,12 +358,13 @@ Example of DUT nodes configuration:::
Description :
This package contains VPP plugins
-**VPP Startup Configuration**
+VPP Startup Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~
VPP startup configuration is common for all test cases except test cases related
to SW Crypto device.
-**Default**
+**Common Configuration**
::
@@ -511,7 +520,7 @@ to SW Crypto device.
## Alternate syntax to choose plugin path
# plugin_path /home/bms/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins
-**SW Crypto Device**
+**SW Crypto Device Configuration**
::
@@ -534,15 +543,16 @@ to SW Crypto device.
vdev cryptodev_aesni_mb_pmd,socket_id=0
}
-TG Configuration
-----------------
+TG Settings - Scapy
+-------------------
Traffic Generator node is VM running the same OS Linux as SUTs. Ports of this
VM are used as source (Tx) and destination (Rx) ports for the traffic.
Traffic scripts of test cases are executed on this VM.
-**TG VM configuration**
+TG VM Configuration
+~~~~~~~~~~~~~~~~~~~
Configuration of the TG VMs is defined in `VIRL topologies directory`_.
@@ -557,7 +567,8 @@ Configuration of the TG VMs is defined in `VIRL topologies directory`_.
<interface id="4" name="eth5"/>
<interface id="5" name="eth6"/>
-**TG node port configuration**
+TG Port Configuration
+~~~~~~~~~~~~~~~~~~~~~
Port configuration of TG is defined in topology file that is generated per VIRL
simulation based on the definition stored in `VIRL topologies directory`_.
@@ -620,8 +631,9 @@ Example of TG node configuration:::
link: link5
driver: virtio-pci
-**Traffic generator**
+Traffic Generator
+~~~~~~~~~~~~~~~~~
-Functional tests utilize Scapy as a traffic generator. There was used Scapy
-v2.3.1 for |vpp-release| tests.
+Functional tests utilize Scapy as a traffic generator. Scapy v2.3.1 is
+used for |vpp-release| tests.
diff --git a/docs/report/vpp_performance_tests/test_environment.rst b/docs/report/vpp_performance_tests/test_environment.rst
index 131e51dea3..f8880b1a1b 100644
--- a/docs/report/vpp_performance_tests/test_environment.rst
+++ b/docs/report/vpp_performance_tests/test_environment.rst
@@ -17,7 +17,7 @@
DUT Settings - VPP
------------------
+------------------
VPP Version
~~~~~~~~~~~