csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

3 files changed, 0 insertions, 300 deletions

diff --git a/tests/func/ipv6/ipv6_multipath_routing.robot b/tests/func/ipv6/ipv6_multipath_routing.robot
deleted file mode 100644
index fddf3a98a8..0000000000
--- a/tests/func/ipv6/ipv6_multipath_routing.robot
+++ /dev/null
@@ -1,73 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/counters.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *Ipv6 Multipath routing test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
-| ... | and multipath routing.
-| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
-| ... | link to DUT. Packet is received on TG on the second link from DUT1.
-
-*** Variables ***
-| ${ip_1}= | 3ffe:61::1
-| ${ip_2}= | 3ffe:62::1
-| ${test_dst_ip}= | 3ffe:71::1
-| ${test_src_ip}= | 3ffe:51::1
-| ${prefix_length}= | 64
-| ${neighbor_1_ip}= | 3ffe:62::2
-| ${neighbor_1_mac}= | 02:00:00:00:00:02
-| ${neighbor_2_ip}= | 3ffe:62::3
-| ${neighbor_2_mac}= | 02:00:00:00:00:03
-
-*** Test Cases ***
-| TC01: IPv6 Equal-cost multipath routing
-| | [Documentation]
-| | ... | [Top] TG=DUT
-| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
-| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\
-| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are UP
-| | And Vpp Set If Ipv6 Addr | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
-| | And Vpp Set If Ipv6 Addr | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
-| | And Add Ip Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
-| | And Add Ip Neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
-| | When Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_1_ip}
-| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
-| | And Vpp Route Add
-| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_2_ip}
-| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
-| | Then Send Packets And Check Multipath Routing | ${tg_node}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip}
-| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/func/ipv6/ipv6_ra.robot b/tests/func/ipv6/ipv6_ra.robot
deleted file mode 100644
index e45ce730c9..0000000000
--- a/tests/func/ipv6/ipv6_ra.robot
+++ /dev/null
@@ -1,107 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/counters.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *IPv6 Router Advertisement test cases*
-| ...
-| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
-| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
-| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
-| ... | with IPv6 routing and static routes. TG verifies received RA packets.
-
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 3ffe:62::1
-| ${tg_to_dut1_ip}= | 3ffe:62::2
-| ${prefix_length}= | 64
-| ${interval}= | 2
-
-*** Test Cases ***
-| TC01: DUT transmits RA on IPv6 enabled interface
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\
-| | ... | by DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path For 3-node Testing Is Set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces In 3-node Path Are Up
-| | And Vpp Set If Ipv6 Addr | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | Then Receive And Check Router Advertisement Packet
-| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac}
-
-| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
-| | ... | to be sent by DUT1 and verify the received RA packets are correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path For 3-node Testing Is Set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces In 3-node Path Are Up
-| | And Vpp Set If Ipv6 Addr | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
-| | ... | interval=${interval}
-| | :FOR | ${n} | IN RANGE | ${2}
-| | | Then Receive And Check Router Advertisement Packet
-| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval}
-
-| TC03: DUT responds to Router Solicitation request
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path For 3-node Testing Is Set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces In 3-node Path Are Up
-| | And Vpp Set If Ipv6 Addr | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send Router Solicitation And Check Response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
-| | ... | ${tg_to_dut1_ip}
-
-| TC04: DUT responds to Router Solicitation request sent from link local address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
-| | ... | sending of Router Advertisement packets periodically.
-| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
-| | ... | for response from DUT1 and verify the received RA packet is correct.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path For 3-node Testing Is Set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces In 3-node Path Are Up
-| | And Vpp Set If Ipv6 Addr | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
-| | Then Send Router Solicitation And Check Response
-| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
diff --git a/tests/func/ipv6/ipv6_untagged.robot b/tests/func/ipv6/ipv6_untagged.robot
deleted file mode 100644
index 6048daad67..0000000000
--- a/tests/func/ipv6/ipv6_untagged.robot
+++ /dev/null
@@ -1,120 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/counters.robot
-| Resource | resources/libraries/robot/default.robot
-| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | HW_ENV
-| Suite Setup | Run Keywords
-| ... | Setup ipv6 to all dut in topology | ${nodes} | ${nodes_ipv6_addr} | AND
-| ... | Vpp nodes ra suppress link layer | ${nodes} | AND
-| ... | Vpp nodes setup ipv6 routing | ${nodes} | ${nodes_ipv6_addr} | AND
-| ... | Setup all TGs before traffic script
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show vpp trace dump on all DUTs | AND
-| ... | Check VPP PID in Teardown
-| Documentation | *IPv6 routing test cases*
-| ...
-| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
-| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
-| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
-| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
-| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
-| ... | Echo Request packets are sent in both directions by TG on links to DUT1
-| ... | and DUT2 and received on TG links on the other side of circular
-| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
-| ... | addresses.
-
-*** Test Cases ***
-| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
-| | ... | verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
-
-| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 64B to 1500B with increment step
-| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
-
-| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 1500B to 9000B with increment
-| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
-| | [Teardown] | Run keywords
-| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
-| | ... | AND | Check VPP PID in Teardown
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
-| | Compute Path
-| | ${dut_port} | ${dut_node}= | Last Interface
-| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
-| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
-| | # IPv6 header and ICMPv6 header
-| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
-| | Run Keyword If | ${mtu} > 1518
-| | ...            | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
-| | ...            | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
-
-| TC04: DUT routes to its egress interface
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
-| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
-| | ...                    | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC05: DUT1 routes to DUT2 ingress interface
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
-| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
-| | ...                      | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC06: DUT1 routes to DUT2 egress interface
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
-| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
-| | ...                             | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC07: DUT1 and DUT2 route between TG interfaces
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
-| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | ...                  | ${nodes_ipv6_addr}
-
-| TC08: DUT replies to IPv6 Neighbor Solicitation
-| | [Documentation]
-| | ... | On DUT configure interface IPv6 address in the main routing\
-| | ... | domain. Make TG send Neighbor Solicitation message on the link
-| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
-| | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}