feat(tests): Remove unsupported suites

The new suites were added in [1]
and the VPP functionality was removed in [2].

[1] https://gerrit.fd.io/r/c/csit/+/28508
[2] https://gerrit.fd.io/r/c/vpp/+/31443

Change-Id: Id3fa984bf9f61a1dd831d637695ac6844c86ffc8
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 0 insertions, 171 deletions

diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
deleted file mode 100644
index 115575b294..0000000000
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot
+++ /dev/null
@@ -1,171 +0,0 @@
-# Copyright (c) 2023 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/crypto/ipsec.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1
-| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE
-| ... | AES_256_GCM | AES | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4ipsec1tnlhw-ip4base-policy-aes256gcm
-|
-| Suite Setup | Setup suite topology interfaces | performance | cryptohw
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | ipsec_all
-|
-| Test Template | Local Template
-|
-| Documentation | **IPv4 IPsec tunnel mode performance test suite.**
-| ... |
-| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
-| ... | topology with single links between nodes.
-| ... |
-| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \
-| ... | Eth-IPv4-IPSec on DUT1-DUT2.
-| ... |
-| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \
-| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \
-| ... | encrypt it and send to another DUT, where packets are decrypted and \
-| ... | sent back to TG.
-| ... |
-| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
-| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
-| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
-| ... | expressed in percentage of packets transmitted. NDR and PDR are \
-| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
-| ... | library.
-| ... | Test packets are generated by TG on \
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
-| ... | (flow-group per direction, number of flows per flow-group equals to \
-| ... | number of IPSec tunnels) with all packets \
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \
-| ... | static payload. MAC addresses are matching MAC addresses of the TG \
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \
-| ... | is applied to both streams.
-| ... |
-| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
-| ... | crypto_native_plugin.so
-| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${crypto_type}= | HW_DH895xcc
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${54}
-| ${tg_if1_ip4}= | 192.168.10.254
-| ${dut1_if1_ip4}= | 192.168.10.11
-| ${dut1_if2_ip4}= | 100.0.0.1
-| ${dut2_if1_ip4}= | 200.0.0.102
-| ${dut2_if2_ip4}= | 192.168.20.11
-| ${tg_if2_ip4}= | 192.168.20.254
-| ${raddr_ip4}= | 20.0.0.0
-| ${laddr_ip4}= | 10.0.0.0
-| ${addr_range}= | ${24}
-| ${n_tunnels}= | ${1}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | # These are enums (not strings) so they cannot be in Variables table.
-| | ${encr_alg}= | Crypto Alg AES GCM 256
-| | ${auth_alg}= | Set Variable | ${NONE}
-| | ${ipsec_proto}= | IPsec Proto ESP
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1}
-| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1}
-| | And Initialize IPSec in 3-node circular topology
-| | And VPP IPsec Add Multiple Tunnels
-| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels}
-| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4}
-| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}