diff options
Diffstat (limited to 'GPL/traffic_profiles/trex')
12 files changed, 117 insertions, 987 deletions
diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd10000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd10000.py deleted file mode 100644 index 65291fcd59..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd10000.py +++ /dev/null @@ -1,142 +0,0 @@ -# Copyright (c) 2024 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::270F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::270F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::270F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::270F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - seed=1, - # Cycle length. TRex does not allow any higher value. - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - seed=2, - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-2p.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-2p.py index 4658e764c2..8948e785a4 100644 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-2p.py +++ b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-2p.py @@ -84,7 +84,7 @@ class TrafficStreams(TrafficStreamsScaleClass): self.pkt_vm.append( STLScVmRaw( [ - STLVmFlowVar( + STLVmFlowVarRepeatableRandom( name="ipv6_dst", min_value=base, max_value=base + count, diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-6p.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-6p.py index 5d1b265a77..374be384ef 100644 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-6p.py +++ b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000-6p.py @@ -112,7 +112,7 @@ class TrafficStreams(TrafficStreamsScaleClass): self.pkt_vm.append( STLScVmRaw( [ - STLVmFlowVar( + STLVmFlowVarRepeatableRandom( name="ipv6_dst", min_value=base, max_value=base + count, diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000.py deleted file mode 100644 index d30fc2d22a..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd100000.py +++ /dev/null @@ -1,142 +0,0 @@ -# Copyright (c) 2024 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::1:869F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::1:869F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::1:869F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::1:869F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - seed=1, - # Cycle length. TRex does not allow any higher value. - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - seed=2, - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-2p.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-2p.py index 8db6a6447b..735888d265 100644 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-2p.py +++ b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-2p.py @@ -84,7 +84,7 @@ class TrafficStreams(TrafficStreamsScaleClass): self.pkt_vm.append( STLScVmRaw( [ - STLVmFlowVar( + STLVmFlowVarRepeatableRandom( name="ipv6_dst", min_value=base, max_value=base + count, diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-6p.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-6p.py index 4a1307c510..5cc32159e5 100644 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-6p.py +++ b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000-6p.py @@ -106,7 +106,7 @@ class TrafficStreams(TrafficStreamsScaleClass): self.pkt_vm.append( STLScVmRaw( [ - STLVmFlowVar( + STLVmFlowVarRepeatableRandom( name="ipv6_dst", min_value=base, max_value=base + count, diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000.py deleted file mode 100644 index 8c704bd6ea..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst-rnd1000000.py +++ /dev/null @@ -1,142 +0,0 @@ -# Copyright (c) 2024 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::F:423F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::F:423F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::F:423F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::F:423F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - seed=1, - # Cycle length. TRex does not allow any higher value. - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVarRepeatableRandom( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - seed=2, - limit=(2**24 - 1) - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst10000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst10000.py deleted file mode 100644 index 534f914121..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst10000.py +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::270F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::270F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::270F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::270F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst100000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst100000.py deleted file mode 100644 index 1bc64d9c0e..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst100000.py +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::1:869F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::1:869F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::1:869F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::1:869F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst1000000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst1000000.py deleted file mode 100644 index 8c22b5eabe..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst1000000.py +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2023 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::F:423F - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::F:423F -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::F:423F" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::F:423F" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000-2p.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000-2p.py new file mode 100644 index 0000000000..3e314aeac1 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000-2p.py @@ -0,0 +1,113 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Single parallel bi-directional streams sent as W --> E and E --> W + at the same time. + - Packet: ETH / IPv6 / +""" + +from trex.stl.api import * +from profile_trex_stateless_scale_class import TrafficStreamsScaleClass + + +class TrafficStreams(TrafficStreamsScaleClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsScaleClass, self).__init__() + + self.pkt_data = [ + # Direction W --> E: + { + "src_start_ip": "2100::1", + "dst_start_ip": "2200::0", + "dst_end_ip": "2200::7:a11f" + }, + # Direction E --> W: + { + "src_start_ip": "2200::1", + "dst_start_ip": "2100::0", + "dst_end_ip": "2100::7:a11f" + } + ] + self.pkt_base = [] + self.pkt_vm = [] + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IPv6 | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + for i in range(len(self.pkt_data)): + base, count = self._get_start_end_ipv6( + self.pkt_data[i]["dst_start_ip"], + self.pkt_data[i]["dst_end_ip"] + ) + + self.pkt_base.append( + Ether() / + IPv6( + src=self.pkt_data[i]["src_start_ip"], + dst=self.pkt_data[i]["dst_start_ip"] + ) + ) + self.pkt_vm.append( + STLScVmRaw( + [ + STLVmFlowVar( + name="ipv6_dst", + min_value=base, + max_value=base + count, + size=8, + seed=self.pkt_data[i]["seed"], + limit=(2**24 - 1) + ), + STLVmWrFlowVar( + fv_name="ipv6_dst", + pkt_offset="IPv6.dst", + offset_fixup=8 + ) + ] + ) + ) + + return self.pkt_base, self.pkt_vm + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000.py b/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000.py deleted file mode 100644 index c3e6a2da96..0000000000 --- a/GPL/traffic_profiles/trex/trex-stl-ethip6-ip6dst500000.py +++ /dev/null @@ -1,140 +0,0 @@ -# Copyright (c) 2023 Intel and/or its affiliates. -# Copyright (c) 2023 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Stream profile for T-rex traffic generator. - -Stream profile: - - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. - - Packet: ETH / IPv6 / - - Direction 0 --> 1: - - Source IP address range: 2001:1::1 - - Destination IP address range: 2001:2::0 - 2001:2::7:a11f - - Direction 1 --> 0: - - Source IP address range: 2001:2::1 - - Destination IP address range: 2001:1::0 - 2001:1::7:a11f -""" - -from trex.stl.api import * -from profile_trex_stateless_base_class import TrafficStreamsBaseClass - - -class TrafficStreams(TrafficStreamsBaseClass): - """Stream profile.""" - - def __init__(self): - """Initialization and setting of streams' parameters.""" - - super(TrafficStreamsBaseClass, self).__init__() - - # IPs used in packet headers. - self.p1_src_start_ip = u"2001:1::1" - self.p1_dst_start_ip = u"2001:2::0" - self.p1_dst_end_ip = u"2001:2::7:a11f" - - self.p2_src_start_ip = u"2001:2::1" - self.p2_dst_start_ip = u"2001:1::0" - self.p2_dst_end_ip = u"2001:1::7:a11f" - - def define_packets(self): - """Defines the packets to be sent from the traffic generator. - - Packet definition: | ETH | IPv6 | - - :returns: Packets to be sent from the traffic generator. - :rtype: tuple - """ - - base_p1, count_p1 = self._get_start_end_ipv6( - self.p1_dst_start_ip, - self.p1_dst_end_ip - ) - base_p2, count_p2 = self._get_start_end_ipv6( - self.p2_dst_start_ip, - self.p2_dst_end_ip - ) - - # Direction 0 --> 1 - base_pkt_a = ( - Ether() / - IPv6( - src=self.p1_src_start_ip, - dst=self.p1_dst_start_ip - ) - ) - # Direction 1 --> 0 - base_pkt_b = ( - Ether() / - IPv6( - src=self.p2_src_start_ip, - dst=self.p2_dst_start_ip - ) - ) - - # Direction 0 --> 1 - vm1 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p1, - max_value=base_p1 + count_p1, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - # Direction 1 --> 0 - vm2 = STLScVmRaw( - [ - STLVmFlowVar( - name=u"ipv6_dst", - min_value=base_p2, - max_value=base_p2 + count_p2, - size=8, - op=u"inc" - ), - STLVmWrFlowVar( - fv_name=u"ipv6_dst", - pkt_offset=u"IPv6.dst", - offset_fixup=8 - ) - ] - ) - - return base_pkt_a, base_pkt_b, vm1, vm2 - - -def register(): - """Register this traffic profile to T-rex. - - Do not change this function. - - :return: Traffic streams. - :rtype: Object - """ - return TrafficStreams() |