aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/features
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/features')
-rw-r--r--resources/libraries/robot/features/acl.robot294
-rw-r--r--resources/libraries/robot/features/gbp.robot2
2 files changed, 295 insertions, 1 deletions
diff --git a/resources/libraries/robot/features/acl.robot b/resources/libraries/robot/features/acl.robot
new file mode 100644
index 0000000000..a70a34c2db
--- /dev/null
+++ b/resources/libraries/robot/features/acl.robot
@@ -0,0 +1,294 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Documentation | ACL keywords.
+
+*** Keywords ***
+| Configure MACIP ACLs
+| | [Documentation]
+| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs
+| | ... | plus two hitting ACEs for both traffic directions.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node. Type: dictionary
+| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
+| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - src_ip_start - Source IP address start. Type: string
+| | ... | - ip_step - IP address step. Type: string
+| | ... | - src_mac_start - Source MAC address start in format with colons.
+| | ... | Type: string
+| | ... | - src_mac_step - Source MAC address step. Type: string
+| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a
+| | ... | wildcard mask. Type: string
+| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured.
+| | ... | Type: integer
+| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect.
+| | ... | Type: string
+| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1.
+| | ... | Type: string
+| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0.
+| | ... | Type: string
+| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1.
+| | ... | Type: string
+| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2.
+| | ... | Type: string
+| | ... | - tg_mac_mask - MAC address mask for traffic streams.
+| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string
+| | ...
+| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE}
+| | ...
+| | ${src_ip_int} = | IP To Int | ${src_ip_start}
+| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step}
+| | ...
+| | ${ip_limit} = | Set Variable | 255.255.255.255
+| | ${ip_limit_int} = | IP To Int | ${ip_limit}
+| | ...
+| | ${src_mac_int} = | Mac To Int | ${src_mac_start}
+| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step}
+| | ...
+| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff
+| | ${mac_limit_int} = | Mac To Int | ${mac_limit}
+| | ...
+| | ${acl}= | Set Variable | ipv4 permit
+| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
+| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step}
+| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step}
+| | | ${ipv4_limit_reached}= | Set Variable If
+| | | ... | ${src_ip_int} > ${ip_limit_int} | ${TRUE}
+| | | ${mac_limit_reached}= | Set Variable If
+| | | ... | ${src_mac_int} > ${mac_limit_int} | ${TRUE}
+| | | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' | Log
+| | | ... | Can't do more iterations - IPv4 address limit has been reached.
+| | | ... | WARN
+| | | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' | Log
+| | | ... | Can't do more iterations - MAC address limit has been reached.
+| | | ... | WARN
+| | | ${src_ip} = | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}'
+| | | ... | Set Variable | ${ip_limit}
+| | | ... | ELSE | Int To IP | ${src_ip_int}
+| | | ${src_mac}= | Run Keyword If | '${mac_limit_reached}' == '${TRUE}'
+| | | ... | Set Variable | ${mac_limit}
+| | | ... | ELSE | Int To Mac | ${src_mac_int}
+| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32
+| | | ... | mac ${src_mac} | mask ${src_mac_mask},
+| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}'
+| | ${acl0}= | Catenate | ${acl}
+| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac}
+| | ... | mask ${tg_mac_mask}
+| | ${acl1}= | Catenate | ${acl}
+| | ... | ipv4 ${acl_action} ip ${tg_stream2_subnet} mac ${tg_stream2_mac}
+| | ... | mask ${tg_mac_mask}
+| | Add Macip Acl Multi Entries | ${dut} | rules=${acl0}
+| | Add Macip Acl Multi Entries | ${dut} | rules=${acl1}
+| | ${acl_idx}= | Set Variable | 0
+| | Run Keyword Unless | '${dut_if1}' == '${NONE}'
+| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx}
+| | ${acl_idx}= | Set Variable | 1
+| | Run Keyword Unless | '${dut_if2}' == '${NONE}'
+| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx}
+
+| Configure IPv4 ACLs
+| | [Documentation]
+| | ... | Configure ACL with required number of not-hitting permit ACEs plus two
+| | ... | hitting ACEs for both traffic directions.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut_node - DUT node. Type: dictionary
+| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
+| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
+| | ... | \| GigabitEthernet0/8/0 \|
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - src_ip_start - Source IP address start. Type: string
+| | ... | - dst_ip_start - Destination IP address start. Type: string
+| | ... | - ip_step - IP address step. Type: string
+| | ... | - sport_start - Source port number start. Type: string
+| | ... | - dport_start - Destination port number start. Type: string
+| | ... | - port_step - Port number step. Type: string
+| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured.
+| | ... | Type: integer
+| | ... | - acl_apply_type - To what path apply the ACL - input or output.
+| | ... | Type: string
+| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect.
+| | ... | Type: string
+| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1.
+| | ... | Type: string
+| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0.
+| | ... | Type: string
+| | ...
+| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE}
+| | ${src_ip_int} = | Evaluate
+| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step
+| | ... | modules=ipaddress
+| | ${dst_ip_int} = | Evaluate
+| | ... | int(ipaddress.ip_address(unicode($dst_ip_start))) - $ip_step
+| | ... | modules=ipaddress
+| | ${ip_limit} = | Set Variable | 255.255.255.255
+| | ${ip_limit_int} = | Evaluate
+| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress
+| | ${sport}= | Evaluate | $sport_start - $port_step
+| | ${dport}= | Evaluate | $dport_start - $port_step
+| | ${port_limit}= | Set Variable | ${65535}
+| | ${acl}= | Set Variable | ipv4 permit
+| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
+| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step
+| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step
+| | | ${sport}= | Evaluate | $sport + $port_step
+| | | ${dport}= | Evaluate | $dport + $port_step
+| | | ${ipv4_limit_reached}= | Set Variable If
+| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int
+| | | ... | ${TRUE}
+| | | ${udp_limit_reached}= | Set Variable If
+| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE}
+| | | Run Keyword If | $ipv4_limit_reached is True | Log
+| | | ... | Can't do more iterations - IPv4 address limit has been reached.
+| | | ... | WARN
+| | | Run Keyword If | $udp_limit_reached is True | Log
+| | | ... | Can't do more iterations - UDP port limit has been reached.
+| | | ... | WARN
+| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True
+| | | ... | Set Variable | ${ip_limit}
+| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int))
+| | | ... | modules=ipaddress
+| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True
+| | | ... | Set Variable | ${ip_limit}
+| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int))
+| | | ... | modules=ipaddress
+| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit
+| | | ... | ${sport}
+| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit
+| | | ... | ${dport}
+| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32
+| | | ... | sport ${sport} | dport ${dport},
+| | | Exit For Loop If
+| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True
+| | ${acl}= | Catenate | ${acl}
+| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet},
+| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet}
+| | Add Replace Acl Multi Entries | ${dut} | rules=${acl}
+| | @{acl_list}= | Create List | ${0}
+| | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None
+| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | input | ${acl_list}
+| | Run Keyword If | 'input' in $acl_apply_type and $dut_if2 is not None
+| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | input | ${acl_list}
+| | Run Keyword If | 'output' in $acl_apply_type and $dut_if1 is not None
+| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | output
+| | ... | ${acl_list}
+| | Run Keyword If | 'output' in $acl_apply_type and $dut_if2 is not None
+| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output
+| | ... | ${acl_list}
+
+| Configure ACLs on a single interface
+| | [Documentation]
+| | ... | Configure ACL
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut - DUT node. Type: string
+| | ... | - dut_if - DUT node interface name. Type: string
+| | ... | - acl_apply_type - To what path apply the ACL - input or output.
+| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect.
+| | ... | - subnets - Subnets to apply the specific ACL. Type: list
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']}
+| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0
+| | ...
+| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action}
+| | ... | @{subnets}
+| | Set Test variable | ${acl} | ${EMPTY}
+| | :FOR | ${subnet} | IN | @{subnets}
+| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}'
+| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet}
+| | | ... | ELSE
+| | | ... | Catenate | SEPARATOR=", " | ${acl}
+| | | ... | ipv4 ${acl_action} src ${subnet}
+| | Add Replace Acl Multi Entries | ${dut} | rules=${acl}
+| | @{acl_list} = | Create List | ${0}
+| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type}
+| | ... | ${acl_list}
+
+| Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
+| | ... | circular topology. Get the interface MAC addresses and setup ARP on
+| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG
+| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix
+| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24
+| | ... | and next hop of neighbour DUT interface IPv4 address.
+| | ... | Apply required ACL rules to DUT1 interfaces.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ip_nr - Number of IPs to be used. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize IPv4 routing fwith IPv4 ACLs on DUT1 \
+| | ... | in 3-node circular topology \|
+| | ...
+| | [Arguments] | ${ip_nr}=${1}
+| | ...
+| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${dut2}
+| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2}
+| | ... | ELSE | Set Variable | ${dut1}
+| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2_if2}
+| | ... | ELSE | Set Variable | ${dut1_if2}
+| | ...
+| | Set interfaces in path up
+| | ...
+| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
+| | | VPP Add IP Neighbor
+| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac}
+| | | VPP Add IP Neighbor
+| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add IP Neighbor
+| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
+| | ...
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24
+| | VPP Interface Set IP Address
+| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address
+| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
+| | ...
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
+| | ... | interface=${dut1_if2}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
+| | ... | interface=${dut2_if1}
+| | ...
+| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
diff --git a/resources/libraries/robot/features/gbp.robot b/resources/libraries/robot/features/gbp.robot
index 6ebdad1532..8495475639 100644
--- a/resources/libraries/robot/features/gbp.robot
+++ b/resources/libraries/robot/features/gbp.robot
@@ -14,7 +14,7 @@
*** Settings ***
| Library | resources.libraries.python.GBP
| ...
-| Documentation | GBP keywords
+| Documentation | GBP keywords.
*** Keywords ***
| Initialize GBP routing domains on node