aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/honeycomb/policer.robot
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/honeycomb/policer.robot')
-rw-r--r--resources/libraries/robot/honeycomb/policer.robot163
1 files changed, 163 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/policer.robot b/resources/libraries/robot/honeycomb/policer.robot
new file mode 100644
index 0000000000..65ef319d43
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/policer.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/traffic.robot
+| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords
+| ... | WITH NAME | RoutingKeywordsAPI
+| Variables | resources/test_data/honeycomb/policer_variables.py
+| Documentation | Keywords used to test Policer using Honeycomb.
+
+*** Keywords ***
+| Honeycomb Configures Policer
+| | [Documentation] | Uses Honeycomb API to configure Policer on the specified\
+| | ... | interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - policer_data - data needed to configure Policer. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb Configures Policer \| ${node} \
+| | ... | \| ${policer_data} \|
+| | ...
+| | [Arguments] | ${node} | ${policer_data}
+| | Configure Policer
+| | ... | ${node} | ${policer_data['name']} | ${policer_data}
+
+| Policer configuration from Honeycomb should be
+| | [Documentation] | Retrieves Policer operational data and verifies if\
+| | ... | Policer is configured correctly.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - policer_data - data to compare configuration Policer with.\
+| | ... | Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Policer configuration from Honeycomb should be \
+| | ... | \| ${node} \| ${policer_data} \|
+| | ...
+| | [Arguments] | ${node} | ${policer_data}
+| | ${data}= | Get Policer oper data | ${node} | ${policer_data['name']}
+| | Compare data structures | ${data[0]} | ${policer_data}
+
+| Policer configuration from Honeycomb should be empty
+| | [Documentation] | Checks whether Policer configuration from Honeycomb \
+| | ... | is empty.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Policer configuration from Honeycomb should be empty \
+| | ... | \| ${node} \|
+| | ...
+| | [Arguments] | ${node}
+| | Run keyword and expect error | HoneycombError*404*
+| | ... | Get Policer oper data | ${node} | ${policer_data['name']}
+
+| Honeycomb removes Policer configuration
+| | [Documentation] | Uses Honeycomb API to remove Policer configuration\
+| | ... | from the specified interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes Policer configuration \
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
+| | ...
+| | [Arguments] | ${node}
+| | Configure Policer | ${node} | ${policer_data['name']}
+
+| Policer test teardown
+| | [Documentation] | Uses Honeycomb API to remove Policer configuration\
+| | ... | and reset interface state.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes Policer configuration \
+| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
+| | ...
+| | [Arguments] | ${node}
+| | Honeycomb removes Policer configuration | ${node}
+
+| Honeycomb enables Policer on interface
+| | [Documentation] | Uses Honeycomb API to enable Policer on an interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ... | - table_name - name of an ACL table. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb enables ACL on interface \| ${nodes['DUT1']} \
+| | ... | \| GigabithEthernet0/8/0 \| table0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface} | ${table_name}
+| | Enable Policer on interface
+| | ... | ${node} | ${interface} | ${table_name}
+
+| Honeycomb disables Policer on interface
+| | [Documentation] | Uses Honeycomb API to disable Policer on an interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface on the specified node. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb disables Policer on interface \| ${nodes['DUT1']} \
+| | ... | \| GigabithEthernet0/8/0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | Disable Policer on interface
+| | ... | ${node} | ${interface}
+
+| Honeycomb Send Packet and Verify Marking
+| | [Documentation] | Send packet and verify DSCP of the received packet.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - TG node. Type: dictionary
+| | ... | - tx_if - TG transmit interface. Type: string
+| | ... | - rx_if - TG receive interface. Type: string
+| | ... | - src_mac - Packet source MAC. Type: string
+| | ... | - dst_mac - Packet destination MAC. Type: string
+| | ... | - src_ip - Packet source IP address. Type: string
+| | ... | - dst_ip - Packet destination IP address. Type: string
+| | ... | - dscp_num - DSCP value to verify. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| ${dscp}= \| DSCP AF22 \|
+| | ... | \| Send Packet and Verify Marking \| ${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \
+| | ... | \| 192.168.122.1 \| ${dscp} \|
+| | ...
+| | [Arguments] | ${node} | ${tx_if} | ${rx_if} | ${src_mac} | ${dst_mac}
+| | ... | ${src_ip} | ${dst_ip} | ${dscp_num}
+| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_if}
+| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_if}
+| | ${args}= | Traffic Script Gen Arg | ${rx_if_name} | ${tx_if_name}
+| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
+| | ${args}= | Set Variable | ${args} --dscp ${dscp_num}
+| | Run Traffic Script On Node | policer.py | ${node} | ${args}