diff options
Diffstat (limited to 'resources/tools/testbed-setup/ansible/roles/vpp_device/files')
4 files changed, 0 insertions, 141 deletions
diff --git a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-default.sh b/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-default.sh deleted file mode 100644 index becc18f1a8..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-default.sh +++ /dev/null @@ -1,22 +0,0 @@ -#!/usr/bin/env bash - -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Add Intel Corporation Ethernet Controller 10G X550T to blacklist. -PCI_BLACKLIST=($(lspci -Dmmd ':1563:0200' | cut -f1 -d' ')) - -# Add Intel Corporation Ethernet Controller X710 for 10GbE SFP+ to whitelist. -PCI_WHITELIST=($(lspci -Dmmd ':1572:0200' | cut -f1 -d' ')) - -# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info. diff --git a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-tx2.sh b/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-tx2.sh deleted file mode 100644 index 6c56752ad0..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs-tx2.sh +++ /dev/null @@ -1,34 +0,0 @@ -#!/usr/bin/env bash - -# Copyright (c) 2021 PANTHEON.tech and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Add QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller to -# blacklist. -PCI_BLACKLIST=($(lspci -Dmmd ':8070:0200' | cut -f1 -d' ')) -# Add I350 Gigabit Network Connection 1521 to blacklist. -PCI_BLACKLIST+=($(lspci -Dmmd ':1521:0200' | cut -f1 -d' ')) -# Add MT27800 Family [ConnectX-5] 1017 to blacklist. -PCI_BLACKLIST+=($(lspci -Dmmd ':1017:0200' | cut -f1 -d' ')) - -# Add Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ to whitelist. -PCI_WHITELIST=($(lspci -Dmmd ':1583:0200' | cut -f1 -d' ')) - -# See http://pci-ids.ucw.cz/v2.2/pci.ids for more info. - -declare -A PF_INDICES -# Intel NICs -PF_INDICES["0000:05:00.0"]=0 -PF_INDICES["0000:05:00.1"]=1 -PF_INDICES["0000:91:00.0"]=0 -PF_INDICES["0000:91:00.1"]=1 diff --git a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.service b/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.service deleted file mode 100644 index 996792ab9b..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.service +++ /dev/null @@ -1,12 +0,0 @@ -[Unit] -Description=CSIT Initialize SR-IOV VFs -After=network.target - -[Service] -Type=oneshot -RemainAfterExit=True -ExecStart=/usr/local/bin/csit-initialize-vfs.sh start -ExecStop=/usr/local/bin/csit-initialize-vfs.sh stop - -[Install] -WantedBy=default.target diff --git a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh b/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh deleted file mode 100644 index 365497865e..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/vpp_device/files/csit-initialize-vfs.sh +++ /dev/null @@ -1,73 +0,0 @@ -#!/usr/bin/env bash - -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# CSIT SRIOV VF initialization and isolation. - -set -euo pipefail - -SCRIPT_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))" -source "${SCRIPT_DIR}/csit-initialize-vfs-data.sh" - -# Initilize whitelisted NICs with maximum number of VFs. -pci_idx=0 -for pci_addr in ${PCI_WHITELIST[@]}; do - if ! [[ ${PCI_BLACKLIST[*]} =~ "${pci_addr}" ]]; then - pci_path="/sys/bus/pci/devices/${pci_addr}" - # SR-IOV initialization - case "${1:-start}" in - "start" ) - sriov_totalvfs=$(< "${pci_path}"/sriov_totalvfs) - ;; - "stop" ) - sriov_totalvfs=0 - ;; - esac - echo ${sriov_totalvfs} > "${pci_path}"/sriov_numvfs - # SR-IOV 802.1Q isolation - case "${1:-start}" in - "start" ) - pf=$(basename "${pci_path}"/net/*) - for vf in $(seq "${sriov_totalvfs}"); do - # PCI address index in array (pairing siblings). - if [[ -n ${PF_INDICES[@]} ]] - then - vlan_pf_idx=${PF_INDICES[$pci_addr]} - else - vlan_pf_idx=$(( pci_idx % (${#PCI_WHITELIST[@]} / 2) )) - fi - # 802.1Q base offset. - vlan_bs_off=1100 - # 802.1Q PF PCI address offset. - vlan_pf_off=$(( vlan_pf_idx * 100 + vlan_bs_off )) - # 802.1Q VF PCI address offset. - vlan_vf_off=$(( vlan_pf_off + vf - 1 )) - # VLAN string. - vlan_str="vlan ${vlan_vf_off}" - # MAC string. - mac5="$(printf '%x' ${pci_idx})" - mac6="$(printf '%x' $(( vf - 1 )))" - mac_str="mac ba:dc:0f:fe:${mac5}:${mac6}" - # Set 802.1Q VLAN id and MAC address - ip link set ${pf} vf $(( vf - 1 )) ${mac_str} ${vlan_str} - ip link set ${pf} vf $(( vf - 1 )) trust on - ip link set ${pf} vf $(( vf - 1 )) spoof off - done - pci_idx=$(( pci_idx + 1 )) - ;; - esac - rmmod i40evf - modprobe i40evf - fi -done |