aboutsummaryrefslogtreecommitdiffstats
path: root/resources
diff options
context:
space:
mode:
Diffstat (limited to 'resources')
-rwxr-xr-xresources/libraries/bash/entry/bootstrap_setup_testbed.sh35
-rw-r--r--resources/libraries/bash/function/setup.sh190
-rw-r--r--resources/tools/testbed-setup/README.md37
-rw-r--r--resources/tools/testbed-setup/ansible/production30
-rwxr-xr-x[-rw-r--r--]resources/tools/testbed-setup/cimc/cimc.py0
5 files changed, 258 insertions, 34 deletions
diff --git a/resources/libraries/bash/entry/bootstrap_setup_testbed.sh b/resources/libraries/bash/entry/bootstrap_setup_testbed.sh
new file mode 100755
index 0000000000..9dd61cfc9d
--- /dev/null
+++ b/resources/libraries/bash/entry/bootstrap_setup_testbed.sh
@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# ++ This entry script has access to arguments:
+# ++ ${@} = <linux_ip> <mgmt_ip> <mgmt_username> <mgmt_pass>
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/setup.sh" || die "Source failed."
+common_dirs || die
+pxe_host "${@}" || die
+ansible_host || die
diff --git a/resources/libraries/bash/function/setup.sh b/resources/libraries/bash/function/setup.sh
new file mode 100644
index 0000000000..0b863aa17a
--- /dev/null
+++ b/resources/libraries/bash/function/setup.sh
@@ -0,0 +1,190 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -exuo pipefail
+
+
+function ansible_host () {
+ # Setup host via ansible playbook.
+ #
+ # Variable read:
+ # - ${HOST} - Server production IP address (Linux).
+
+ set -exuo pipefail
+
+ pushd "${TOOLS_DIR}"/testbed-setup/ansible || die "Pushd failed!"
+ ssh-copy-id -o StrictHostKeyChecking=no testuser@"${HOST}"
+ ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' \
+ --inventory production site.yaml --limit ${HOST} || {
+ die "Failed to ansible host!"
+ }
+ popd || die "Popd failed!"
+}
+
+
+function installed () {
+ # Check if the given utility is installed. Fail if not installed.
+ #
+ # Arguments:
+ # - ${1} - Utility to check.
+ # Returns:
+ # - 0 - If command is installed.
+ # - 1 - If command is not installed.
+
+ set -exuo pipefail
+
+ command -v "${1}"
+}
+
+
+function pxe_cimc () {
+ # Reboot server with next boot set to PXE, disables PXE after server is UP
+ # to prevent endless loop.
+ #
+ # Variable read:
+ # - ${HOST} - Server production IP address (Linux).
+ # - ${MGMT} - Server management IP address (IPMI/CIMC).
+ # - ${USER} - CIMC user.
+ # - ${PASS} - CIMC pass.
+
+ set -exuo pipefail
+
+ pushd "${TOOLS_DIR}"/testbed-setup/cimc || die "Pushd failed!"
+ ./cimc.py -u "${USER}" -p "${PASS}" "${MGMT}" --debug -pxe || {
+ die "Failed to send the PXE reboot command!"
+ }
+ for i in $(seq 1 500); do
+ warn "Waiting for server to become reachable ... " || die
+ if pingable "${HOST}"; then
+ ./cimc.py -u "${USER}" -p "${PASS}" "${MGMT}" --debug -hdd || {
+ die "Failed to send the HDD command!"
+ }
+ ssh-keygen -f "/home/testuser/.ssh/known_hosts" -R "${HOST}" || {
+ die "Failed to remove obsolete SSH key!"
+ }
+ warn "Server reachable, PXE running!" || die
+ break
+ fi
+ done
+ popd || die "Popd failed!"
+}
+
+
+function pxe_host () {
+ # Reboot host into PXE mode and detect once it is up.
+ #
+ # Variable read:
+ # - ${@} - All script arguments from command line.
+ # Variable set:
+ # - ${HOST} - Server production IP address (Linux).
+ # - ${MGMT} - Server management IP address (IPMI/CIMC).
+ # - ${USER} - User.
+ # - ${PASS} - Pass.
+
+ set -exuo pipefail
+
+ if ! installed ipmitool; then
+ die "ipmitool not present. Please install before continue!"
+ fi
+
+ HOST=${1}
+ MGMT=${2}
+ USER=${3}
+ PASS=${4}
+
+ ipmi="ipmitool -I lanplus -H ${MGMT} -U ${USER} -P ${PASS} chassis status"
+ cimc="./cimc.py -u ${USER} -p ${PASS} ${MGMT} --mac-table"
+ pushd "${TOOLS_DIR}"/testbed-setup/cimc || die "Pushd failed!"
+ if ${ipmi}; then
+ warn "This is IMPI managed server!"
+ pxe_supermicro || die
+ elif ${cimc}; then
+ warn "This is CIMC managed server!"
+ pxe_cimc || die
+ else
+ die "Unknown management console!"
+ fi
+ popd || die "Popd failed!"
+
+ wait_for_ssh || die
+}
+
+
+function pxe_supermicro () {
+ # Reboot server with next boot set to PXE.
+ #
+ # Variable read:
+ # - ${HOST} - Server production IP address (Linux).
+ # - ${MGMT} - Server management IP address (IPMI/CIMC).
+ # - ${USER} - IPMI user.
+ # - ${PASS} - IPMI pass.
+
+ set -exuo pipefail
+
+ if ! installed ipmitool; then
+ die "ipmitool not present. Please install before continue!"
+ fi
+
+ cmd="chassis bootdev pxe"
+ ipmitool -I lanplus -H "${MGMT}" -U "${USER}" -P "${PASS}" "${cmd}" || {
+ die "Failed to send the ${cmd} command!"
+ }
+ cmd="power reset"
+ ipmitool -I lanplus -H "${MGMT}" -U "${USER}" -P "${PASS}" "${cmd}" || {
+ die "Failed to send the ${cmd} command!"
+ }
+ for i in $(seq 1 500); do
+ warn "Waiting for server to become reachable ... " || die
+ if pingable "${HOST}"; then
+ ssh-keygen -f "/home/testuser/.ssh/known_hosts" -R "${HOST}" || {
+ die "Failed to remove obsolete SSH key!"
+ }
+ warn "Server reachable, PXE running!" || die
+ break
+ fi
+ done
+}
+
+
+function pingable () {
+ # Check if the host is reachable over ping. Fail if not reachable.
+ #
+ # Arguments:
+ # - ${1} - Host to check.
+ # Returns:
+ # - 0 - If host is reachable over ping.
+ # - 1 - If host is not reachable over ping.
+
+ set -exuo pipefail
+
+ ping -q -c 1 "${1}" 2>&1 > /dev/null
+}
+
+
+function wait_for_ssh () {
+ # Check if the host is reachable over SSH. Fail if not reachable.
+ #
+ # Variable read:
+ # - ${HOST} - Server production IP address (Linux).
+
+ set -exuo pipefail
+
+ while ! ssh "${HOST}"
+ do
+ warn "SSH not yet reachable, trying again!"
+ sleep 2
+ done
+ warn "SSH reachable!"
+}
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md
index ad9b400126..b4f376b96e 100644
--- a/resources/tools/testbed-setup/README.md
+++ b/resources/tools/testbed-setup/README.md
@@ -32,9 +32,6 @@ is available on the PXE bootstrap server in ~testuser/host-setup.
- `sudo service isc-dhcp-server restart`
- `cd ~testuser/host-setup`
- `sudo mkdir /mnt/cdrom`
- - Ubuntu Xenial
- - `wget 'http://releases.ubuntu.com/16.04.2/ubuntu-16.04.2-server-amd64.iso'`
- - `sudo mount -o loop ubuntu-16.04.2-server-amd64.iso /mnt/cdrom/`
- Ubuntu Bionic
- `wget 'http://cdimage.ubuntu.com/ubuntu/releases/18.04/release/ubuntu-18.04-server-amd64.iso'`
- `sudo mount -o loop ubuntu-18.04-server-amd64.iso /mnt/cdrom/`
@@ -65,31 +62,31 @@ is available on the PXE bootstrap server in ~testuser/host-setup.
### Bootstrap the host
-Optional: From PXE boostrap server in case of installing Haswell
+Convenient way to re-stage host via script:
+
+ `sudo ./bootstrap_setup_testbed.sh <linux_ip> <mgmt_ip> <username> <pass>`
+
+Optional: CIMC - From PXE boostrap server
- - `cd resources/tools/testbed-setup/cimc`
- Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i`
- Adjust BIOS settings
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />'`
- - add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
- - Reboot server with boot from PXE (restart immediately)
- - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe`
-
-Optional: If RAID is not created on Haswells. Execute while Ubuntu install is running
-
- - create RAID array. Reboot if needed.
+ - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
+ - If RAID is not created in CIMC. Create RAID array. Reboot.
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe`
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]'`
Alternatively, create the RAID array manually.
-
- - Set the next boot from HDD (without restart)
+ - Reboot server with boot from PXE (restart immediately)
+ - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe`
+ - Set the next boot from HDD (without restart) Execute while Ubuntu install is running.
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd`
-Optional: If installing Skylake machine
+Optional: IPMI - From PXE boostrap server
- Get MAC address of LAN0
- `ipmitool -U ADMIN -H $HOST_ADDRESS raw 0x30 0x21 | tail -c 18`
+ - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
- Reboot into PXE for next boot only
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN chassis bootdev pxe`
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN power reset`
@@ -97,14 +94,15 @@ Optional: If installing Skylake machine
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol activate`
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol deactivate`
-
When installation is finished:
- Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x`
- Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit`
- Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible`
- - Edit production file and uncomment servers that are supposed to be installed: `ansible-playbook --ask-become-pass --inventory production site.yaml --list-hosts`
- - Run ansible on selected hosts: `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml`
+ - Edit production file and uncomment servers that are supposed to be
+ installed.
+ - Run ansible on selected hosts:
+ `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml`
For non-VIRL hosts, stop here.
@@ -158,4 +156,5 @@ Back on the PXE bootstrap server:
`ansible-playbook 04-disk-image.yaml`
-The VIRL host should now be operational. Test, and when ready, create a ~jenkins-in/status file with the appropriate status.
+The VIRL host should now be operational. Test, and when ready, create a
+~jenkins-in/status file with the appropriate status.
diff --git a/resources/tools/testbed-setup/ansible/production b/resources/tools/testbed-setup/ansible/production
index f2364031b6..465796546e 100644
--- a/resources/tools/testbed-setup/ansible/production
+++ b/resources/tools/testbed-setup/ansible/production
@@ -1,20 +1,20 @@
all:
children:
-# haswell:
-# children:
-# tg:
-# hosts:
-# 10.30.51.16: null #t1-tg1
-# 10.30.51.20: null #t2-tg1
-# 10.30.51.24: null #t3-tg1
-# sut:
-# hosts:
-# 10.30.51.17: null #t1-sut1
-# 10.30.51.18: null #t1-sut2
-# 10.30.51.21: null #t2-sut1
-# 10.30.51.22: null #t2-sut2
-# 10.30.51.25: null #t3-sut1
-# 10.30.51.26: null #t3-sut2
+ haswell:
+ children:
+ tg:
+ hosts:
+ 10.30.51.16: null #t1-tg1
+ 10.30.51.20: null #t2-tg1
+ 10.30.51.24: null #t3-tg1
+ sut:
+ hosts:
+ 10.30.51.17: null #t1-sut1
+ 10.30.51.18: null #t1-sut2
+ 10.30.51.21: null #t2-sut1
+ 10.30.51.22: null #t2-sut2
+ 10.30.51.25: null #t3-sut1
+ 10.30.51.26: null #t3-sut2
# virl: # WARNING, DO NOT ENABLE VIRL UNLESS YOU KNOW WHAT YOU ARE DOING
# hosts:
# 10.30.51.28: null #t4-virl1
diff --git a/resources/tools/testbed-setup/cimc/cimc.py b/resources/tools/testbed-setup/cimc/cimc.py
index 2e0fc42a25..2e0fc42a25 100644..100755
--- a/resources/tools/testbed-setup/cimc/cimc.py
+++ b/resources/tools/testbed-setup/cimc/cimc.py