diff options
Diffstat (limited to 'tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot')
| -rw-r--r-- | tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot new file mode 100644 index 0000000000..29f6993095 --- /dev/null +++ b/tests/vpp/device/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-scapy.robot @@ -0,0 +1,96 @@ +# Copyright (c) 2022 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-eth-2memif-1dcr +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | telemetry | container +| +| Test Template | Local Template +| +| Documentation | **IPv4 routing test cases with memif interface** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing on both \ +| ... | links. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | and two static IPv4 /24 route entries. Container is connected to VPP \ +| ... | via Memif interface. Container is running same VPP version as running \ +| ... | on DUT. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 are \ +| ... | sent in one direction by TG on links to DUT1 and via container; on \ +| ... | receive TG verifies packets for correctness and their IPv4 src-addr, \ +| ... | dst-addr and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC791, RFC826, RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_functional +# Telemetry +| ${telemetry_profile}= | vppctl_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Ver]** Make TG send IPv4 packet in both directions between two \ +| | ... | of its interfaces to be routed by DUT to and from docker; verify \ +| | ... | all packets are received. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Start containers for test | auto_scale=${False} | pinning=${False} +| | And Initialize IPv4 routing with memif pairs +| | Then Send packet and verify headers +| | ... | ${tg} | 10.10.10.1 | 20.20.20.1 +| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0] +| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0] + +*** Test Cases *** +| 64B-0c-ethip4-ip4base-eth-2memif-1dcr-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} |