diff options
Diffstat (limited to 'tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot')
| -rw-r--r-- | tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot new file mode 100644 index 0000000000..21cad9a38b --- /dev/null +++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2tap-scapy.robot @@ -0,0 +1,100 @@ +# Copyright (c) 2022 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | L2BD | BASE | 2TAP | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-l2bdbasemaclrn-eth-2tap +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test | namespace +| Test Teardown | Tear down test | packet_trace | telemetry | namespace +| ... | linux_bridge +| +| Test Template | Local Template +| +| Documentation | **Tap Interface Traffic Tests** +| ... | +| ... | - **[Top] Network Topologies:** TG=DUT1 2-node topology with two links \ +| ... | between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) \ +| ... | are set depending on test case; Namespaces (NM) \ +| ... | are set on DUT1 with attached linux-TAP. +| ... | +| ... | - **[Ver] TG verification:** Test IPv4 packets with IP protocol=61 \ +| ... | are sent by TG on link to DUT1; On receipt TG verifies packets \ +| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses. +| ... | +| ... | - **[Ref] Applicable standard specifications:** + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${0} +| ${bid_TAP}= | tapBr +# Telemetry +| ${telemetry_profile}= | vppctl_test_teardown + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Ver]** Packet sent from TG is passed through all L2BD and \ +| | ... | received back on TG. Then src_ip, dst_ip and MAC are checked. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | ${int1}= | And Add Tap Interface | ${dut1} | tap0 +| | ${int2}= | And Add Tap Interface | ${dut1} | tap1 +| | And Set Interface State | ${dut1} | ${int1} | up +| | And Set Interface State | ${dut1} | ${int2} | up +| | And Create L2 BD | ${dut1} | 19 | learn=${TRUE} +| | And Create L2 BD | ${dut1} | 20 | learn=${TRUE} +| | And Linux Add Bridge | ${dut1} | ${bid_TAP} | tap0 | tap1 +| | And Add interface to bridge domain | ${dut1} | ${int1} | 20 | 0 +| | And Add interface to bridge domain | ${dut1} | ${DUT1_${int}1}[0] | 20 | 0 +| | And Add interface to bridge domain | ${dut1} | ${int2} | 19 | 0 +| | And Add interface to bridge domain | ${dut1} | ${DUT1_${int}2}[0] | 19 | 0 +| | Then Send IP packet and verify received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] + +*** Test Cases *** +| 64B-0c-ethip4-l2bdbasemaclrn-eth-2tap-scapy +| | [Tags] | 64B | 0C +| | frame_size=${64} | phy_cores=${0} |