aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot')
-rw-r--r--tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot93
1 files changed, 93 insertions, 0 deletions
diff --git a/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
new file mode 100644
index 0000000000..7fc076bbad
--- /dev/null
+++ b/tests/vpp/device/vm_vhost/ethip4/2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.robot
@@ -0,0 +1,93 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4-l2xcbase-eth-2vhost-1vm
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | vhost
+|
+| Test Template | Local Template
+|
+| Documentation | *L2 cross-connect test cases with vhost user interface*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | VM and single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
+| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
+| ... | interfaces. Guest is configured with VPP l2 cross-connect \
+| ... | interconnecting vhost-user interfaces.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
+| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
+| ${nf_dtc} | ${1}
+| ${nf_dtcr} | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \
+| | ... | two L2 cross-connects (L2XC), each with one untagged interface \
+| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
+| | ... | TG send IPv4 packets in both directions between two of its \
+| | ... | i/fs to be switched by DUT to and from VM; verify all packets \
+| | ... | are received. [Ref]
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
+| | And Configure chains of NFs connected via vhost-user
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
+| | ... | vnf=vppl2xc_2vhostvr1024 | pinning=${False}
+| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
+| | ... | ${TG_pf1}[0] | ${TG_pf2}[0]
+
+*** Test Cases ***
+| 64B-0c-ethip4-l2xcbase-eth-2vhost-1vm-scapy
+| | [Tags] | 64B | 0C
+| | frame_size=${64} | phy_cores=${0}