aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/l2bd
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/l2bd')
-rw-r--r--tests/vpp/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot91
-rw-r--r--tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot85
2 files changed, 0 insertions, 176 deletions
diff --git a/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot b/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot
deleted file mode 100644
index 43e092dae2..0000000000
--- a/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,91 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/vm/qemu.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2 bridge-domain test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
-| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
-| ... | to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with MAC learning enabled.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-
-*** Test Cases ***
-| TC01: DUT reports active interfaces
-| | [Documentation]
-| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \
-| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO
-| | VPP reports interfaces through VAT on '${nodes['DUT1']}'
-
-| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify
-| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions
-| | ... | and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | When Create bridge domain | ${dut_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id1}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-
-| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \
-| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
-| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
-| | ... | both directions and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | When Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${bd_id2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot b/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot
deleted file mode 100644
index ce99a35fcb..0000000000
--- a/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/vm/qemu.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2 bridge-domain test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
-| ... | to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with static MACs.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
-| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make
-| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2
-| | ... | in both directions and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | When Create bridge domain | ${dut1_node} | ${bd_id1} | learn=${FALSE}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Add destination port to L2FIB | ${tg_node}
-| | ... | ${tg_to_dut1}
-| | ... | ${dut1_node}
-| | ... | ${dut1_to_tg}
-| | ... | ${bd_id1}
-| | And Add destination port to L2FIB | ${tg_node}
-| | ... | ${tg_to_dut2}
-| | ... | ${dut1_node}
-| | ... | ${dut1_to_dut2}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | ... | learn=${FALSE}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${bd_id2}
-| | And Add destination port to L2FIB | ${tg_node}
-| | ... | ${tg_to_dut1}
-| | ... | ${dut2_node}
-| | ... | ${dut2_to_dut1}
-| | ... | ${bd_id2}
-| | And Add destination port to L2FIB | ${tg_node}
-| | ... | ${tg_to_dut2}
-| | ... | ${dut2_node}
-| | ... | ${dut2_to_tg}
-| | ... | ${bd_id2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | ${tg_to_dut1}
-| | ... | ${tg_to_dut2}