diff options
Diffstat (limited to 'tests/vpp/perf/container_memif')
14 files changed, 892 insertions, 232 deletions
diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index c03f90cf47..26b41b124f 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,34 +27,39 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2\ -| ... | bridge domains and MAC learning enabled. Container is connected to VPP\ -| ... | via Memif interface. Container is running same VPP version as running\ -| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\ -| ... | pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2\ -| ... | tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \ +| ... | L2 bridge domains and MAC learning enabled. Container is connected to \ +| ... | VPP via Memif interface. Container is running same VPP version as \ +| ... | running on DUT. Container is limited via cgroup to use 3 cores \ +| ... | allocated from pool of isolated CPUs. There are no memory constraints. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -69,7 +74,7 @@ | ${bd_id1}= | 1 | ${bd_id2}= | 2 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -77,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot index 48e2493cb1..628a264655 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2 -| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via -| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC -| ... | is limited via cgroup to use 3 cores allocated from pool of isolated -| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with -| ... | ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with two \ +| ... | L2 bridge domains and MAC learning enabled. LXC is connected to VPP \ +| ... | via Memif interface. LXC is running same VPP version as running on \ +| ... | DUT. LXC is limited via cgroup to use 3 cores allocated from pool of \ +| ... | isolated CPUs. There are no memory constraints. DUT1 and DUT2 are \ +| ... | tested with with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,7 +65,7 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | LXC | ${container_chain_topology}= | chain @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index bc35fd9a74..12263ff0aa 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | use 3 cores allocated from pool of isolated CPUs. There are no memory \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,7 +65,7 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot index 5662346013..856ae1c8ae 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,29 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP -| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 tested with ${nic_name}. +| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP \ +| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores \ | ... | allocated from pool of isolated CPUs. There are no memory contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -60,7 +64,7 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | LXC | ${container_chain_topology}= | chain @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index f0cb26cf6e..8df1e82e68 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,30 +26,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing with two FIB tables and two static IPv4 /24 route entries per -| ... | FIB table. Container is connected to VPP via Memif interface. Container -| ... | is running same VPP version as running on DUT. Container is limited via -| ... | cgroup to use cores allocated from pool of isolated CPUs. There are no -| ... | memory contraints. DUTs are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing with two FIB tables and two static IPv4 /24 route entries per \ +| ... | FIB table. Container is connected to VPP via Memif interface. \ +| ... | Container is running same VPP version as running on DUT. Container is \ +| ... | limited via cgroup to use cores allocated from pool of isolated CPUs. \ +| ... | There are no memory contraints. DUTs are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -60,7 +64,7 @@ | ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -68,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index 6760dea27d..ee2f7a6e06 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,34 +27,39 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q test -| ... | cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge\ -| ... | domains and MAC learning enabled. Container is connected to VPP via\ -| ... | Memif interface. Container is running same VPP version as running\ -| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from\ -| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested\ -| ... | with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP\ -| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. Container is connected to VPP via \ +| ... | Memif interface. Container is running same VPP version as running \ +| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from \ +| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -69,7 +74,7 @@ | ${bd_id1}= | 1 | ${bd_id2}= | 2 # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-dot1qip4asym-ip4src254 +| ${traffic_profile}= | trex-stl-dot1qip4asym-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -77,9 +82,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..8b64f858a2 --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/features/dma.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | MEMIF | DOCKER | DMA +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | container +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput L2BD with memif and IEEE 802.1Q \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. IEEE \ +| ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. Container is connected to VPP via \ +| ... | Memif interface. Container is running same VPP version as running \ +| ... | on DUT. Container is limited via cgroup to use 3 cores allocated from \ +| ... | pool of isolated CPUs. There are no memory constraints. DUT1 is tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L2 +| ${overhead}= | ${4} +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +| ${bd_id1}= | 1 +| ${bd_id2}= | 2 +| ${heap_size_mult}= | ${2} +#| ${page_size}= | 1G +# Traffic profile: +| ${traffic_profile}= | trex-stl-dot1qip4asym-ip4src254 +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_dma + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** Each DUT runs L2BD switching with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable DMA WQs on all DUTs +| | And Start containers for test +| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${True} +| | ... | pinning=${True} +| | Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology +| | ... | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-dot1q-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot index 8bbeb9bbe5..5ee6e1b5f5 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,7 +65,7 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..4996795c0c --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr.robot @@ -0,0 +1,153 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/features/dma.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | DMA +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | eth-l2bdbasemaclrn-eth-2memif-dma-1dcr +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | container +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 bridge domain. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with two L2 bridge \ +| ... | domains and MAC learning enabled. DUT1 is tested with ${nic_name}. \ +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L2 +| ${overhead}= | ${0} +| ${heap_size_mult}= | ${2} +#| ${page_size}= | 1G +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_dma + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs L2BD switching config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable DMA WQs on all DUTs +| | And Start containers for test +| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${True} +| | ... | pinning=${True} +| | And Initialize L2 Bridge Domain for multiple chains with memif pairs +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot index f91ef96ee7..51defa7d47 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. -| ... | DUT1 tested with ${nic_name}.\ -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,7 +65,7 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..7443c1015e --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr.robot @@ -0,0 +1,153 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/features/dma.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | DOCKER | DMA +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | eth-l2xcbase-eth-2memif-dma-1dcr +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | container +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 tested with ${nic_name}. +| ... | Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L2 +| ${overhead}= | ${0} +| ${heap_size_mult}= | ${2} +#| ${page_size}= | 1G +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_dma + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs L2XC switching config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable DMA WQs on all DUTs +| | And Start containers for test +| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${True} +| | ... | pinning=${True} +| | And Initialize L2 xconnect with memif pairs +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-eth-l2xcbase-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot index c474555e67..44d19c08f9 100644 --- a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-1dcr-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing with -| ... | two FIB tables and two static IPv4 /24 route entries per FIB table. -| ... | Container is connected to VPP via Memif interface. Container is running -| ... | same VPP version as running on DUT. Container is limited via cgroup to -| ... | use cores allocated from pool of isolated CPUs. There are no memory -| ... | contraints. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | with two FIB tables and two static IPv4 /24 route entries per FIB \ +| ... | table. Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -61,7 +65,7 @@ | ${osi_layer}= | L3 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 # Container | ${container_engine}= | Docker | ${container_chain_topology}= | chain @@ -69,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr.robot b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr.robot new file mode 100644 index 0000000000..2a50bd158c --- /dev/null +++ b/tests/vpp/perf/container_memif/2n1l-10ge2p1x710-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr.robot @@ -0,0 +1,153 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/features/dma.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | MEMIF | DOCKER | DMA +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4-ip4base-eth-2memif-dma-1dcr +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | container +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 routing test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | with two FIB tables and two static IPv4 /24 route entries per FIB \ +| ... | table. Container is connected to VPP via Memif interface. Container is \ +| ... | running same VPP version as running on DUT. Container is limited via \ +| ... | cgroup to use cores allocated from pool of isolated CPUs. There are \ +| ... | no memory contraints. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${heap_size_mult}= | ${2} +#| ${page_size}= | 1G +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_dma + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable DMA WQs on all DUTs +| | And Start containers for test +| | ... | nf_chains=${1} | nf_nodes=${1} | auto_scale=${True} +| | ... | pinning=${True} +| | And Initialize IPv4 routing with memif pairs +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4-ip4base-eth-2memif-dma-1dcr-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/regenerate_testcases.py b/tests/vpp/perf/container_memif/regenerate_testcases.py index ec754aa261..e22f6de5c3 100755 --- a/tests/vpp/perf/container_memif/regenerate_testcases.py +++ b/tests/vpp/perf/container_memif/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 -# Copyright (c) 2019 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |