diff options
Diffstat (limited to 'tests/vpp/perf/crypto')
188 files changed, 13694 insertions, 12586 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..0e1cecab98 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot @@ -0,0 +1,174 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FASTPATH | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${100000} +# Main heap size multiplicator +| ${heap_size_mult}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable IPsec SPD Fast Path IPv4 Inbound And Outbound +| | ... | ${${n_tunnels}*10} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And VPP Set Neighbor Limit on all DUTs | ${nodes} | ${${n_tunnels}*2} +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec100000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index f8c25c1bc3..38848d4489 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +14,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_10000 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes256gcm +| ... | ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} +| ${n_tunnels}= | ${10000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,19 +104,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} +| | And Enable IPSec Async Mode on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] @@ -115,50 +119,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlhwasync-ip4base-int-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 70cdafda5a..1cb7670472 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +14,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_10000 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm +| ... | ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +73,28 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} +| ${n_tunnels}= | ${10000} +| ${rxq_ratio}= | ${2} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,19 +106,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} +| | And Enable IPSec Async Mode on all VPP DUTs | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} @@ -115,50 +121,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot index 258b6e28e0..d1842e0d76 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,49 +14,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_10000 +| ... | FASTPATH | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha +| ... | ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,26 +72,29 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} +| ${n_tunnels}= | ${10000} +| ${rxq_ratio}= | ${2} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,13 +106,11 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} +| | And Enable IPsec SPD Fast Path IPv4 Inbound And Outbound +| | ... | ${${n_tunnels}*10} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface @@ -114,50 +123,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlhwasync-ip4base-policy-fastpath-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index 71f05cc075..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_10000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${10000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index 35c3e5a7e8..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_10000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${10000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 6bd4e5f9ad..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_10000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${10000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index 079378099b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_10000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${10000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index b710512883..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${10000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index e20952c052..30a5709fbc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index ce8d606852..89b3f8c2ce 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 0b8239bdc8..3c213b58fc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index 172a911b3c..4f6cd8ea10 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +14,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm +| ... | ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +73,27 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} +| ${n_tunnels}= | ${10000} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -97,11 +108,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} @@ -116,50 +122,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..e093b2329d --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot @@ -0,0 +1,173 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FASTPATH | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable IPsec SPD Fast Path IPv4 Inbound And Outbound +| | ... | ${${n_tunnels}*10} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..521e4b57aa --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot @@ -0,0 +1,173 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | SPD_FLOW_CACHE | NIC_Intel-X710 +| ... | SCALE | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them with SPD flow cache enabled \ +| ... | on both inbound and outbound traffic. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${10000} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Inbound +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..3734288de1 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_1000 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1000} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..f29a37dfbd --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_1000 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1000} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 2c5ac80d10..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index a883c25219..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot deleted file mode 100644 index 6ec0e83392..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index dc1ea3a3db..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index efcabbdf63..41ceb5270e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,27 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +105,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index 5f09b970c5..2e2729a4d5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_1000 @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index 086b9ba511..82b7143deb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_1000 @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index a20c0d1375..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 774a645fb3..bcc46079fd 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index 00e0bd7155..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index d2616a9f9c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 729c4ae8ca..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index bc2dada640..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr.robot index ba11e06e34..3ad94ac96e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +14,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha +| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +28,43 @@ | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \ +| ... | address. DUTs get IPv4 traffic from TG, encrypt it and send to \ +| ... | another DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +72,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -97,10 +106,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} @@ -111,54 +116,54 @@ | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} | | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..9af8dc5f66 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr.robot @@ -0,0 +1,178 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FLOW_DIR | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \ +| ... | address, enabled IPsec_ESP flow director between them.\ +| ... | DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${dut1_spi}= | ${400000} +| ${dut2_spi}= | ${300000} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | And VPP Create Ipsec Flows On Dut +| | ... | ${dut1} | ${n_tunnels} | ${rxq_count_int} | ${dut1_spi} +| | ... | ${DUT1_${int}2}[0] +| | And VPP Create Ipsec Flows On Dut +| | ... | ${dut2} | ${n_tunnels} | ${rxq_count_int} | ${dut2_spi} +| | ... | ${DUT2_${int}1}[0] +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-dir-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..31b5079f7b --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr.robot @@ -0,0 +1,174 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FLOW_RSS | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels which shared same tunnel src and dst ip \ +| ... | address, enabled flow rss action between them.\ +| ... | DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, \ +| ... | where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | ${flow_index} = | And VPP Ipsec Flow Enable Rss | ${dut1} +| | And VPP Flow Enable | ${dut1} | ${DUT1_${int}2}[0] | ${flow_index} +| | ${flow_index} = | And VPP Ipsec Flow Enable Rss | ${dut2} +| | And VPP Flow Enable | ${dut2} | ${DUT2_${int}1}[0] | ${flow_index} +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-fixtnlip-ip4base-policy-flow-rss-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index c0240724a3..bd2d615040 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr.robot index 9caa35be96..d0a41db9f4 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400 +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,44 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} +| ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +104,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] @@ -112,50 +119,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 19a9f19f07..53dafb0189 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 8c60fcc2cb..4635b70c49 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr.robot index c2eb1946cc..bd399f8ecb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,44 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +72,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +103,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] @@ -112,50 +118,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index 82a861f6bd..299a32f0ac 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE @@ -24,38 +23,47 @@ | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -97,11 +105,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr.robot index 64fa889d18..62f328434e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,58 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha +| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +72,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -97,16 +106,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} @@ -115,50 +121,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..55a95344d5 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_100 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${100} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..da0bb0edfc --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_100 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec100spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${100} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..3e665a2fe7 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_10 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${10} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..3bb23bbeca --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_10 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${10} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..1fb6841428 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_1 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..39ac669b91 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_1 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 3ead61307b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 681e1e448f..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_256_SHA config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot deleted file mode 100644 index 01879c8140..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-policy-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot deleted file mode 100644 index 02e37038c1..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr.robot +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_256_GCM | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-policy-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes256gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 1e0fd92b05..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 0923936c69..d36dff2597 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,27 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +105,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index 17c1015abb..b85ff35478 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index 3112cca147..5d0d94a93f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE @@ -22,41 +21,51 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +74,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +105,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index b90d0fb20b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_256_SHA config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index bec8975e67..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_512_SHA config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 95070aab6d..df06d31201 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index e802692e61..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index d5e3a0f22f..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 1a24c6a3f1..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index d0c235ee99..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index f91e2b430c..4bb76d2458 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr.robot index 366684858e..fd8fb4e20f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,44 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} +| ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +104,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] @@ -112,50 +119,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index c1ff5766a7..f48386ad64 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index ac103420d0..5613b9db59 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\ -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg} = | Crypto Alg AES GCM 256 -| | ${auth_alg} = | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr.robot index 2b95b50535..7fd798a8b0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha +| ... | ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,44 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +72,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +103,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] @@ -112,50 +118,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index cfd8aa17a5..a16e041220 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE @@ -24,38 +23,47 @@ | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr.robot index 900d476cf1..cc39fbbb20 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,58 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| ... | AES_256_GCM | AES | REASSEMBLY | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha +| ... | ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. The MTU on DUT-DUT link is lowered to induce packet \ +| ... | fragmentation and reassembly. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +72,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +103,13 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface +| | And Lower DUT1-DUT2 MTU For Fragmentation | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} @@ -112,50 +118,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-reassembly-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..be49518121 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..cbb11a7286 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..bdc58b7143 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | BASE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_1 +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index c712e49fa2..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index 9f6eda436b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 6fee5fb803..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index ba0b6bcf24..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 797ec06cb0..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..8ba2e18400 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_2 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..7e5410e6c7 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_2 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..be13f10713 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_2 +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index 18ea04a2e9..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index 83b8746530..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 5d21180735..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index e4cfe4d478..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 7d45056f0b..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 8c981aac8f..2444f1e9af 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 735cdf9049..a4918d449a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 6fcbacc22e..442f776f53 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..e64ad376af --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr.robot @@ -0,0 +1,173 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | FASTPATH | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Main heap size multiplicator +| ${heap_size_mult}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable IPsec SPD Fast Path IPv4 Inbound And Outbound +| | ... | ${${n_tunnels}*10} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-policy-fastpath-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index 2e234745bc..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index bbdb57f9f7..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index aa27e1c337..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index 08da271ac3..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 58df85574c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index b387a4e131..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 1d89410bf9..5c2f2c528b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,32 +27,40 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -62,26 +69,27 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,10 +101,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -109,8 +113,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 97a7842348..04ce94a9e9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,32 +27,40 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -62,26 +69,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,11 +100,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -110,8 +112,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 368c758924..7dcae27f84 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,32 +27,40 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional chain is configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -62,26 +69,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,11 +100,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -110,8 +112,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 9e1b6b83b9..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${40} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 65a2ae55a7..0d41aa51d5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 3268ab595b..d4262a52dc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index b2b80c6d87..d702bd5a64 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index b20bc06d0e..5105a367fb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha +| ... | ethip4ipsec40tnlsw-ip4base-policy-aes256gcm | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +71,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} +| ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} @@ -112,50 +116,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index f325c53ade..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,163 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance | ipsechw -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index c4129c4060..8449ae35f6 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,27 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +105,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot index e424b1e1a9..99f1470270 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot index 2858a309ea..97f2e2adf2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,7 +14,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE @@ -22,41 +21,50 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | ... | ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot index 35e3addd09..96fad57a18 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,5 +1,5 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Copyright (c) 2024 Intel and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,49 +14,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | TNL_4 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm +| ... | ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -65,25 +73,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1000} +| ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUTs runs IPsec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +104,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} @@ -114,50 +119,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index 2c16245e9f..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_4 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 60f5f2fb33..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot index 741d38e887..fdda0fea82 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,26 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,10 +103,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot index 76293751da..f84e8b4e37 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot index 38e1eb0b02..9429fe7eef 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,7 +13,6 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 | ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE @@ -28,34 +27,43 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${4} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,11 +102,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot index f225511a9c..b53451438a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,57 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlsw-ip4base-policy-aes128gcm +| ... | ethip4ipsec4tnlsw-ip4base-policy-aes256gcm | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa +| Test Teardown | Tear down test | performance | ipsec_all | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ | ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,25 +72,25 @@ | ${nic_vfs}= | 0 | ${osi_layer}= | L3 | ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 | ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} +| ${n_tunnels}= | ${4} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,16 +102,11 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} -| | And Apply Startup configuration on all VPP DUTs -| | And Initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface | | And Initialize IPSec in 3-node circular topology | | And VPP IPsec Add Multiple Tunnels @@ -113,50 +116,50 @@ | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlsw-ip4base-policy-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..ac08ca4d3c --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr.robot @@ -0,0 +1,173 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | SPD_FLOW_CACHE | NIC_Intel-X710 +| ... | SCALE | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **IPv4 IPsec tunnel mode performance test suite.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them with SPD flow cache enabled \ +| ... | on both inbound and outbound traffic. DUTs get IPv4 traffic from TG, \ +| ... | encrypt it and send to another DUT, where packets are decrypted and \ +| ... | sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Main heap size multiplicator +| ${heap_size_mult}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Inbound +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-policy-flow-cache-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..6e6adf98fb --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..f3702ebe1d --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..87e3326d08 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_4 +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index ab49221762..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index 6d76d08d8c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index d009ad6f23..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index a5a15da372..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index 7346affb00..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index fbfb631984..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot deleted file mode 100644 index f3569b8d46..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${78} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot deleted file mode 100644 index 08fba2fa13..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot deleted file mode 100644 index 6afea0d023..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ /dev/null @@ -1,170 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${54} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index c4e2a4cb20..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot new file mode 100644 index 0000000000..8222c983ee --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_8 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot new file mode 100644 index 0000000000..ba0cbc1020 --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_8 +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot new file mode 100644 index 0000000000..ba25db9e8e --- /dev/null +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr.robot @@ -0,0 +1,172 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | TNL_8 +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-IPSec on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple IPsec tunnels between them, run with IPsec async mode and \ +| ... | use crypto sw scheduler engine to schedule crypto work to crypto \ +| ... | cores. DUTs get IPv4 traffic from TG, encrypt it and send to another \ +| ... | DUT, where packets are decrypted and sent back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | is applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.254 +| ${dut1_if1_ip4}= | 192.168.10.11 +| ${dut1_if2_ip4}= | 100.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.102 +| ${dut2_if2_ip4}= | 192.168.20.11 +| ${tg_if2_ip4}= | 192.168.20.254 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 3-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] +| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot deleted file mode 100644 index cdb9977712..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| -| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD -| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY -| ... | NIC_Intel-X710 | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance -| -| Test Template | Local Template -| -| Documentation | *IPv4 IPsec transport mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\ -| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\ -| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\ -| ... | from TG, encrypt it and send to another DUT, where packets are\ -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, number of flows per flow-group equals to\ -| ... | number of IPSec tunnels) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\ -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\ -| ... | RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | HW_DH895xcc -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${58} -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip4}= | 192.168.100.2 -| ${dut_if_ip4}= | 192.168.100.3 -| ${tg_lo_ip4}= | 192.168.3.3 -| ${dut_lo_ip4}= | 192.168.4.4 -| ${ip4_plen}= | ${24} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ -| | ... | IPsec is in transport mode. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize LISP GPE IPv4 over IPsec in 3-node circular topology -| | ... | ${encr_alg} | ${auth_alg} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| 64B-1c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsectptlispgpe-ip4base-aes128cbc-hmac256sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index e3eb5c470b..6fb300157c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,23 @@ | ${overhead}= | ${78} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} +| ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +100,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index 6cda1c7239..f081fa5e82 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128gcm +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} +| ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 2386612c68..348408f6ff 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_10000 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-ip4base-int-aes256gcm +| ... | ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} +| ${n_tunnels}= | ${10000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..714de836a1 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_1000 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1000} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..e34705e8cf --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_1000 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1000} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 42423b2e5f..3438416d05 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,24 @@ | ${overhead}= | ${78} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +101,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot index 093ddc31fb..13e198a3c5 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128gcm +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,71 +100,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot index 8b4de20ad2..1c85d67bed 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | DRV_VFIO_PCI +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha +| ... | ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -63,26 +69,26 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${62} +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +100,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1000tnlhw-ip4base-int-aes128cbc-hmac256sha-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..08ff9528e7 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,164 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +| ${rxq_ratio}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..ac344e98b8 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index 54448105c7..d932dc9045 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-ip4base-int-aes128gcm +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} +| ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 347a916210..6295a38812 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_1000 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-ip4base-int-aes256gcm +| ... | ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} +| ${n_tunnels}= | ${1000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec20000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..22d1279e03 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_1000 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..e65dbe7d20 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_100 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${100} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec100spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..315e86876f --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_100 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec100spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${100} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec100spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..37d90181a5 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_10 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${10} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..f1bbcf6cc6 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | SCALE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_10 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec10spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${10} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec10spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..690cad3de1 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,154 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPD_FLOW_CACHE +| ... | SPE_1 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. SPD flow-cache for IPv4 outbound traffic is enabled. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Enable SPD flow cache IPv4 Outbound +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1spe-cache-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot new file mode 100644 index 0000000000..0ad4fd3c57 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr.robot @@ -0,0 +1,151 @@ +# Copyright (c) 2024 PANTHEON.tech s.r.o. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD +| ... | BASE | IPSEC | IPSECSW | IPSECSPD | SPD_OUTBOUND | SPE_1 | NOCRYPTO +| ... | NIC_Intel-X710 | DRV_VFIO_PCI | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1spe-ip4base-policy-outbound-nocrypto +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC4301: SPD lookup performance** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for IPv4 routing. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing, \ +| ... | two static IPv4 /24 route entries, one SPD on each outbound interface \ +| ... | in each direction and ${rule amount} SPD entry(ies) in each SPD. Only \ +| ... | outbound traffic is matched and only the last rule is the matching \ +| ... | rule. DUT1 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. The DUT does SPD lookup with only \ +| ... | the lowest priority rule matching the traffic. The action of the \ +| ... | matching rule is BYPASS. No encryption or authentication is done. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4301 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${0} +| ${remote_addr_range_ip4}= | 20.20.20.0/24 +| ${local_addr_range_ip4}= | 10.10.10.0/24 +| ${rule_amount}= | ${1} +# Traffic profile +| ${traffic_profile}= | trex-stl-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config with IPsec SPD rules. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPv4 forwarding in circular topology +| | And VPP IPsec create SPDs match nth entry +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${DUT1_${int}1}[0] | ${rule_amount} +| | ... | ${local_addr_range_ip4} | ${remote_addr_range_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1spe-ip4base-policy-outbound-nocrypto-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 96241180c1..3526fbe86a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,24 @@ | ${overhead}= | ${78} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +101,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot index dfacf924d6..b16457abaf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR | TNL_1 | ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes128gcm +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,71 +100,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot index a4eeed0da4..55a09728fd 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-int-aes256gcm +| ... | ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,71 +100,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto}= | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr.robot index a9f822e70f..4dc63497e3 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,48 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha +| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -62,26 +69,25 @@ | ${nic_pfs}= | 2 | ${nic_vfs}= | 0 | ${osi_layer}= | L3 -| ${overhead}= | ${78} +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} | ${n_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_CBC_128 / HMAC_512_SHA config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,68 +99,65 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlhw-ip4base-policy-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..c1f6ccca12 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..7fe71eb06f --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..115099c929 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..e47f23dfba --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | TNL_1 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..8b8525a2db --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..15f8d35708 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..cefadb21e2 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | BASE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_1 +| ... | ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec1tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..c3652c3c70 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..e6985dac09 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..ae425ed9be --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_2 +| ... | ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${2} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec2tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..5cd317d7f5 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40000} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index ba8f2f3ea0..efad663ecb 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-ip4base-int-aes128gcm +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} +| ${n_tunnels}= | ${40000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,69 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 2c2557e331..e653af06bf 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40000 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec400tnlsw-ip4base-int-aes256gcm +| ... | ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${400} +| ${n_tunnels}= | ${40000} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,69 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec400tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec40000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot index 122e24e699..0e0a6273c8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_4 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,32 +27,39 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,24 +70,24 @@ | ${overhead}= | ${78} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} +| ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,10 +99,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -104,66 +106,65 @@ | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} | | ${result}= | Stop Running Traffic | | Display Reconfig Test Message | ${result} *** Test Cases *** -| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-udir-reconf | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot index f2c4319287..a772eb8c42 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_4 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 | ... | AES_128_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,32 +27,39 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,24 +70,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} +| ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,11 +98,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -105,66 +105,65 @@ | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} | | ${result}= | Stop Running Traffic | | Display Reconfig Test Message | ${result} *** Test Cases *** -| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-udir-reconf | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot index 39752a9b12..6b3ef04b8d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_4 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | RECONF +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 | ... | AES_256_GCM | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm +| ... | ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,32 +27,39 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Packet loss IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds throughput NDR (Non Drop Rate) \ +| ... | with zero packet loss tolerance, then measures loss at this load \ +| ... | while additional tunnels are configured. \ +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains one L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -64,24 +70,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${4} +| ${n_tunnels}= | ${40} | ${n_added_tunnels}= | ${1} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ +| | ... | - **[Ver]** Measure packet loss during reconfig at NDR load. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -93,11 +98,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} @@ -105,66 +105,65 @@ | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} | | ${result}= | Stop Running Traffic | | Display Reconfig Test Message | ${result} *** Test Cases *** -| 64B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 64B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 64B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 64B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 1518B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 1518B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 1518B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 9000B-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 9000B-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| 9000B-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| IMIX-1c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| IMIX-2c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf +| IMIX-4c-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-udir-reconf | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..45e981ccc1 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,163 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot index f23e3c6f8e..ac3b0b5f0f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-ip4base-int-aes128gcm +| ... | ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} +| ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,69 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot index 93ab652954..5a2a540063 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_40 | ... | AES_256_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec60000tnlsw-ip4base-int-aes256gcm +| ... | ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,22 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${60000} +| ${n_tunnels}= | ${40} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_256_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,69 +99,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 256 -| | ${auth_alg}= | Set Variable | ${NONE} -| | ${ipsec_proto} = | IPsec Proto ESP -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 64B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec60000tnlsw-ip4base-int-aes256gcm-ndrpdr +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-int-aes256gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..6c420f76f1 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_40 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..198278ba1e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,165 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance | cryptohw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot index dbb00b6db8..a5bc4139d0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -1,5 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Copyright (c) 2020 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,49 +13,55 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1 -| ... | IP4FWD | IPSEC | IPSECHW | ASYNC | IPSECTUN | NIC_Intel-X710 | BASE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 | ... | AES_128_GCM | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir | -| Suite Setup | Setup suite topology interfaces | performance | ipsechw +| Suite Setup | Setup suite topology interfaces | performance | cryptohw | Suite Teardown | Tear down suite | performance | Test Setup | Setup test | performance | Test Teardown | Tear down test | performance | ipsec_sa | | Test Template | Local Template | -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -67,23 +72,23 @@ | ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} +| ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUTs runs IPsec tunneling AES_128_GCM config.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -95,10 +100,6 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES GCM 128 -| | ${auth_alg}= | Set Variable | ${NONE} -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} @@ -106,58 +107,58 @@ | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface | | And Enable IPSec Async Mode on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | ${n_tunnels} -| | ... | ${encr_alg} | ${auth_alg} | ${dut1_if2_ip4} | ${dut2_if1_ip4} +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| 9000B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec1tnlhwasync-ip4base-policy-aes128gcm-ndrpdr +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes128gcm-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..12af09eda6 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,164 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance | cryptohw +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | HW_DH895xcc +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${rxq_ratio}= | ${2} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlhwasync-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot index 89331cf111..c379426060 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,12 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot | -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 | ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI | ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha +| ... | ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir | | Suite Setup | Setup suite topology interfaces | performance | Suite Teardown | Tear down suite | performance @@ -28,34 +27,41 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so | ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci | ${nic_rxq_size}= | 0 @@ -66,23 +72,23 @@ | ${overhead}= | ${78} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${24} -| ${n_tunnels}= | ${5000} +| ${n_tunnels}= | ${4} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | config. Each DUT uses ${phy_cores} physical core(s) for worker \ +| | ... | threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). @@ -94,68 +100,64 @@ | | | | Set Test Variable | \${frame_size} | | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | | | Given Set Max Rate And Jumbo | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} | | And Pre-initialize layer driver | ${nic_driver} | | And Apply startup configuration on all VPP DUTs | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology +| | And Initialize IPSec in 2-node circular topology | | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search *** Test Cases *** -| 64B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 1C | | frame_size=${64} | phy_cores=${1} -| 64B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 2C | | frame_size=${64} | phy_cores=${2} -| 64B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 64B | 4C | | frame_size=${64} | phy_cores=${4} -| 1518B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 1C | | frame_size=${1518} | phy_cores=${1} -| 1518B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 2C | | frame_size=${1518} | phy_cores=${2} -| 1518B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 1518B | 4C | | frame_size=${1518} | phy_cores=${4} -| 9000B-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 1C | | frame_size=${9000} | phy_cores=${1} -| 9000B-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 2C | | frame_size=${9000} | phy_cores=${2} -| 9000B-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | 9000B | 4C | | frame_size=${9000} | phy_cores=${4} -| IMIX-1c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 1C | | frame_size=IMIX_v4_1 | phy_cores=${1} -| IMIX-2c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 2C | | frame_size=IMIX_v4_1 | phy_cores=${2} -| IMIX-4c-ethip4ipsec5000tnlsw-ip4base-int-aes128cbc-hmac512sha-ndrpdr +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr | | [Tags] | IMIX | 4C | | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..4302188ff7 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..2c8af17b36 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..662c9307df --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,162 @@ +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | SCALE | TNL_4 +| ... | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_all +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it \ +| ... | and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 100.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Add Multiple Tunnels +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${TG_pf2}[0] | ${n_tunnels} +| | ... | ${encr_alg} | ${auth_alg} | ${tun_if1_ip4} | ${tun_if2_ip4} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4ipsec4tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..4bb8330e5e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..330631c3ff --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..85cfd2b346 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_4 +| ... | ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${4} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec4tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot new file mode 100644 index 0000000000..6d851928e0 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES CBC 128 +| ${auth_alg}= | SHA 512 256 +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${78} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..bf6c5fe286 --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_128_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 128 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_128_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes128gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot new file mode 100644 index 0000000000..fb562f220e --- /dev/null +++ b/tests/vpp/perf/crypto/2n1l-10ge2p1x710-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2024 Intel and/or its affiliates. +# Copyright (c) 2024 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | UDIR | PERFTEST | HW_ENV | NDRPDR +| ... | IP4FWD | IPSEC | IPSECSW | ASYNC | IPSECINT | NIC_Intel-X710 | SCALE +| ... | SCHEDULER | AES_256_GCM | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 | TNL_8 +| ... | ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance | ipsec_sa +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 IPsec tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUT1, \ +| ... | Eth-IPv4-IPSec on DUT1-TG. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with multiple IPsec \ +| ... | tunnels between it and TG, run with IPsec async mode and use crypto \ +| ... | sw scheduler engine to schedule crypto work to crypto cores. DUT gets \ +| ... | IPv4 traffic from TG, encrypts it and sends back to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. \ +| ... | TG traffic profile contains one L3 flow-groups (number of flows \ +| ... | per flow-group equals to number of IPSec tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) \ +| ... | field is applied to the stream. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_sw_scheduler_plugin.so +| ... | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${encr_alg}= | AES GCM 256 +| ${auth_alg}= | NONE +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${54} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${8} +| ${dp_cores_count}= | ${1} +# Traffic profile: +| ${traffic_profile}= | trex-stl-ethip4-ip4dst${n_tunnels}-udir +| ${traffic_directions}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPSec tunneling AES_256_GCM config. \ +| | ... | Each DUT uses one physical core for data plane workers \ +| | ... | and rest of ${phy_cores} physical core(s) for crypto workers. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Total number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${1}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Enable IPSec Async Mode on all VPP DUTs +| | And Set Data Plane And Feature Plane Workers for IPsec on all VPP DUTs +| | And Initialize IPSec in 2-node circular topology +| | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 3C +| | frame_size=${64} | phy_cores=${3} + +| 64B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 3C +| | frame_size=${1518} | phy_cores=${3} + +| 1518B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 3C +| | frame_size=${9000} | phy_cores=${3} + +| 9000B-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-2c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-3c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 3C +| | frame_size=IMIX_v4_1 | phy_cores=${3} + +| IMIX-4c-ethip4ipsec8tnlswasync-scheduler-ip4base-int-aes256gcm-udir-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/regenerate_testcases.py b/tests/vpp/perf/crypto/regenerate_testcases.py index bba2711971..e22f6de5c3 100755 --- a/tests/vpp/perf/crypto/regenerate_testcases.py +++ b/tests/vpp/perf/crypto/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |