diff options
Diffstat (limited to 'tests/vpp/perf/ip4')
4 files changed, 274 insertions, 2 deletions
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..d301e48fac --- /dev/null +++ b/tests/vpp/perf/ip4/10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF +| ... +| Suite Setup | Setup suite single link | performance_avf +| Suite Teardown | Tear down suite | performance | vifs +| Test Setup | Setup test +| Test Teardown | Tear down test | performance +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\ +| ... | cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ +| ... | tagging is applied on link between DUT1 and DUT2. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\ +| ... | with ${nic_name} with VF enabled. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are\ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ +| ... | all packets containing Ethernet header, IPv4 header with IP\ +| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L3 +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${4} +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +# TG subnets used by T-Rex +| ${tg_if1_net}= | 10.10.10.0 +| ${tg_if2_net}= | 20.20.20.0 +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ +| | ... | physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add DPDK no PCI to all DUTs +| | And Set Max Rate And Jumbo +| | And Apply startup configuration on all VPP DUTs +| | When Initialize AVF interfaces +| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology +| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 8373afbca0..dfb3bef6f9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -33,7 +33,7 @@ | ... | tagging is applied on link between DUT1 and DUT2. | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ | ... | routing and two static IPv4 /30 route entries. DUT1 and DUT2 tested\ -| ... | with ${nic_name}.\ +| ... | with ${nic_name}. | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..b962529184 --- /dev/null +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-avf-dot1q-ip4base-ndrpdr.robot @@ -0,0 +1,136 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | DOT1Q | IP4BASE | DRV_AVF +| ... +| Suite Setup | Setup suite single link | performance_avf +| Suite Teardown | Tear down suite | performance | vifs +| Test Setup | Setup test +| Test Teardown | Tear down test | performance +| ... +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 routing with IEEE 802.1Q test\ +| ... | cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ +| ... | tagging is applied on link between DUT1-if2 and TG-if2. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ +| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.\ +| ... | with VF enabled. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are\ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ +| ... | all packets containing Ethernet header, IPv4 header with IP\ +| ... | protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so +| ${osi_layer}= | L3 +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${4} +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 +# TG subnets used by T-Rex +| ${tg_if1_net}= | 10.10.10.0 +| ${tg_if2_net}= | 20.20.20.0 +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n-dot1qip4asym-ip4src254 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] Each DUT runs IPv4 routing with VLAN and uses ${phy_cores}\ +| | ... | physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add DPDK no PCI to all DUTs +| | And Set Max Rate And Jumbo +| | And Apply startup configuration on all VPP DUTs +| | When Initialize AVF interfaces +| | And Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology +| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-avf-dot1q-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot index 954e36dcdc..77cd70a812 100644 --- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-dot1q-ip4base-ndrpdr.robot @@ -32,7 +32,7 @@ | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. IEEE 802.1Q\ | ... | tagging is applied on link between DUT1-if2 and TG-if2. | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\ -| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}.\ +| ... | two static IPv4 /30 route entries. DUT1 is tested with ${nic_name}. | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ |