diff options
Diffstat (limited to 'tests/vpp/perf/l2')
68 files changed, 2117 insertions, 1692 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot index 8a693b6f56..bb8c2f01e7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. -| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B +| Documentation | **RFC2544: Pkt throughput L2XC with 802.1ad test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 xconnect. \ +| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B \ | ... | vlan tag (id=100) and outer 4B vlan tag (id=200). -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG. \ | ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -66,14 +71,14 @@ | ${type_subif}= | two_tags | ${tag_rewrite}= | pop-2 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index fcdcbfd5fa..87ab3522a4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,30 +26,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -65,14 +71,14 @@ | ${bd_id1}= | 1 | ${bd_id2}= | 2 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 6e43dcfe25..dc7c3a6f56 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\ -| ... | connect. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +67,14 @@ | ${subid}= | 10 | ${tag_rewrite}= | pop-1 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot index 250c97e62f..95b03526c7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot index b1e322e599..b452f31dbd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot index faaabf49f7..f65ec313ba 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot index d2f30dcd0e..cc5ded1eea 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot index e103f90c58..dfe1df43f4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot index 46c634a247..cac8ac3f30 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot index c3d4b39cd0..37c9fd5bd5 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot index 468be89791..3a7a356c52 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot index 296eba2635..879a2f6df4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot index 77338181f3..c791792025 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot index 8900ee1f15..bf0e8e96d9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot index 8536a3d9e1..e7390dc978 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot index d358500dcd..f642d4f3c6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot index d5bb12ec7c..9eb02a2ded 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 515737a8ba..a56cad4ea3 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot index 3764d738e5..d727f99d21 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot index d9232df940..ea929e568b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index b3e497594c..3fcdb42013 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot index 135ceebf4f..6802aecd35 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -77,14 +83,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/24 | ${tg_stream2_subnet}= | 20.0.0.0/24 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100ip4src100 +| ${traffic_profile}= | trex-stl-ethip4-macsrc100ip4src100 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot index 80e1cdeb77..5f29851245 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -77,14 +83,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/15 | ${tg_stream2_subnet}= | 20.0.0.0/15 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100kip4src100k +| ${traffic_profile}= | trex-stl-ethip4-macsrc100kip4src100k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot index 540289cf84..152344c619 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -77,14 +83,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/18 | ${tg_stream2_subnet}= | 20.0.0.0/18 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc10kip4src10k +| ${traffic_profile}= | trex-stl-ethip4-macsrc10kip4src10k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot index 1fecc12fc6..78adbe9e7f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/24 | ${tg_stream2_subnet}= | 20.0.0.0/24 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100ip4src100 +| ${traffic_profile}= | trex-stl-ethip4-macsrc100ip4src100 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot index ef5b1124b3..c8b79381b7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/15 | ${tg_stream2_subnet}= | 20.0.0.0/15 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100kip4src100k +| ${traffic_profile}= | trex-stl-ethip4-macsrc100kip4src100k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot index 815ae62430..df64d73746 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/18 | ${tg_stream2_subnet}= | 20.0.0.0/18 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc10kip4src10k +| ${traffic_profile}= | trex-stl-ethip4-macsrc10kip4src10k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot index 6038e1e4c2..5e414f23c4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/24 | ${tg_stream2_subnet}= | 20.0.0.0/24 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100ip4src100 +| ${traffic_profile}= | trex-stl-ethip4-macsrc100ip4src100 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot index 0266f48326..a410b3958c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/15 | ${tg_stream2_subnet}= | 20.0.0.0/15 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc100kip4src100k +| ${traffic_profile}= | trex-stl-ethip4-macsrc100kip4src100k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index fa42e9233b..b10b3c1498 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +82,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/18 | ${tg_stream2_subnet}= | 20.0.0.0/18 # traffic profile -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc10kip4src10k +| ${traffic_profile}= | trex-stl-ethip4-macsrc10kip4src10k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 0180a88497..325d69c0ea 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +63,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot index b71b11eedb..93d5f8b39e 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot index a0ef617085..70536d0bd2 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot index 160c5dc42d..92af4ad4f2 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot index 801bea58ac..34ee275a0e 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot index 10847c1ad2..5f9626d636 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot index ebf8f33280..169ca282c9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot index 297d2978db..6f50f6db8c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot index 8a683864e7..feb2cf54d0 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template -| | [Documentation] | FIXME. -| | ... | [Cfg] DUT runs IPv4 routing config. +| | [Documentation] +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot index ad9f0cf171..dde7d8e41f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot index ffe5675e3d..6963c33220 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot index 086fc3e206..b8e98e74d3 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 \ +| ... | intefaces. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot index 98673c4bea..9fc86835a6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot index fb33596d66..4e118238be 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot index 4030d37a0e..6a7ee99f1a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index 639467d9fb..24eba06766 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot index 64efd479fc..76584e581e 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u10p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u10p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot index a018cfa9f1..e75d7a1c88 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-100u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-100u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index bb1f54c046..3c1c6e4ba3 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +82,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index f0e5052495..f89983740e 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +68,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc50kdst50k +| ${traffic_profile}= | trex-stl-ethip4-macsrc50kdst50k *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index 70c97870b0..a42b6c4571 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +68,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc5kdst5k +| ${traffic_profile}= | trex-stl-ethip4-macsrc5kdst5k *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 4427e5e0e1..dcebbf8c66 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,37 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +68,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-macsrc500kdst500k +| ${traffic_profile}= | trex-stl-ethip4-macsrc500kdst500k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot index 53afbd9ac3..f547b7cf19 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | patch DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +62,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 84d3e0017c..f1c8b3dffe 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +62,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2XC config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 1b00e06d0e..d98a1679f1 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,31 +26,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 . -| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\ -| ... | 2 VLAN subinterfaces (VID 100 and 200),\ -| ... | 1 L2 BD with the 2 VLAN subinterfaces,\ -| ... | DUT1 tested with ${nic_name} with VF enabled. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with: \ +| ... | 2 VLAN subinterfaces (VID 100 and 200), \ +| ... | 1 L2 BD with the 2 VLAN subinterfaces. \ +| ... | DUT1 is tested with ${nic_name} with VF enabled. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -66,9 +71,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\ -| | ... | worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD with VLAN with ${phy_cores} physical \ +| | ... | core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 3975821e38..4856b4c817 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,29 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- connect.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 5c79af9ca8..9362138b1c 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 1-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +81,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 9a850043aa..57aaea5c03 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +81,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 7a0b90965d..3e89550f9c 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -76,14 +81,14 @@ | ${tg_stream1_subnet}= | 10.0.0.0/18 | ${tg_stream2_subnet}= | 20.0.0.0/18 # traffic profile -| ${traffic_profile}= | trex-stl-2n-ethip4-macsrc10kip4src10k +| ${traffic_profile}= | trex-stl-ethip4-macsrc10kip4src10k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 6ac4f32aa2..d52f0e32be 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +62,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index bf975521b5..6c24a97ca3 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +81,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index 5064cac6a5..b3976f5967 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,30 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | acl_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -75,14 +81,14 @@ | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4udp-10u1000p-conc +| ${traffic_profile}= | trex-stl-ethip4udp-10u1000p-conc *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index e17bf816e6..c8a4156156 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +67,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-macsrc50kdst50k +| ${traffic_profile}= | trex-stl-ethip4-macsrc50kdst50k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index 16c732c3e2..89dece00d0 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +67,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-macsrc5kdst5k +| ${traffic_profile}= | trex-stl-ethip4-macsrc5kdst5k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 5b4e8c1931..cfd66cb02d 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -27,31 +27,36 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -62,14 +67,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-macsrc500kdst500k +| ${traffic_profile}= | trex-stl-ethip4-macsrc500kdst500k *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot index 00cee17787..76cba0e601 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch\ -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +62,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 58f6ecde7d..921e81d923 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,27 +26,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | ${crypto_type}= | ${None} | ${nic_name}= | Intel-X710 | ${nic_driver}= | vfio-pci @@ -57,14 +62,14 @@ | ${osi_layer}= | L2 | ${overhead}= | ${0} # Traffic profile: -| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src254 +| ${traffic_profile}= | trex-stl-ethip4-ip4src254 *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config.\ +| | ... | - **[Cfg]** DUT runs L2XC config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/regenerate_testcases.py b/tests/vpp/perf/l2/regenerate_testcases.py index ec754aa261..e22f6de5c3 100755 --- a/tests/vpp/perf/l2/regenerate_testcases.py +++ b/tests/vpp/perf/l2/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 -# Copyright (c) 2019 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |