blob: c583ae7bed6c08eb7bb58f378cdb05035c75aae7 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
VPP Startup Settings
--------------------
CSIT code manipulates a number of VPP settings in startup.conf for
optimized performance. List of common settings applied to all tests and
test dependent settings follows.
See `VPP startup.conf`_ for a complete set and description of listed
settings.
Common Settings
~~~~~~~~~~~~~~~
List of VPP startup.conf settings applied to all tests:
#. heap-size <value> - set separately for ip4, ip6, stats, main
depending on scale tested.
#. no-tx-checksum-offload - disables UDP / TCP TX checksum offload in
DPDK. Typically needed for use faster vector PMDs (together with
no-multi-seg).
#. buffers-per-numa <value> - sets a number of memory buffers allocated
to VPP per CPU socket. VPP default is 16384. Needs to be increased for
scenarios with large number of interfaces and worker threads. To
accommodate for scale tests, CSIT is setting it to the maximum possible
value corresponding to the limit of DPDK memory mappings (currently
256). For Xeon Skylake platforms configured with 2MB hugepages and VPP
data-size and buffer-size defaults (2048B and 2496B respectively), this
results in value of 215040 (256 * 840 = 215040, 840 * 2496B buffers fit
in 2MB hugepage).
Per Test Settings
~~~~~~~~~~~~~~~~~
List of vpp startup.conf settings applied dynamically per test:
#. corelist-workers <list_of_cores> - list of logical cores to run VPP
worker data plane threads. Depends on HyperThreading and core per
test configuration.
#. num-rx-queues <value> - depends on a number of VPP threads and NIC
interfaces.
#. no-multi-seg - disables multi-segment buffers in DPDK, improves
packet throughput, but disables Jumbo MTU support. Disabled for all
tests apart from the ones that require Jumbo 9000B frame support.
#. UIO driver - depends on topology file definition.
#. QAT VFs - depends on NRThreads, each thread = 1QAT VFs.
|
