diff options
Diffstat (limited to 'ctrl/sysrepo-plugins/yang/ietf')
| -rw-r--r-- | ctrl/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang | 1704 | ||||
| -rw-r--r-- | ctrl/sysrepo-plugins/yang/ietf/ietf-interfaces.yang | 1123 | ||||
| -rw-r--r-- | ctrl/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang | 742 | ||||
| -rw-r--r-- | ctrl/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang | 474 |
4 files changed, 0 insertions, 4043 deletions
diff --git a/ctrl/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang b/ctrl/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang deleted file mode 100644 index 4138ba46e..000000000 --- a/ctrl/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang +++ /dev/null @@ -1,1704 +0,0 @@ -module iana-if-type { - - yang-version 1; - - namespace - "urn:ietf:params:xml:ns:yang:iana-if-type"; - - prefix ianaift; - - import ietf-interfaces { - prefix if; - } - - organization "IANA"; - - contact - " Internet Assigned Numbers Authority - - Postal: ICANN - 4676 Admiralty Way, Suite 330 - Marina del Rey, CA 90292 - - Tel: +1 310 823 9358 - <mailto:iana@iana.org>"; - - description - "This YANG module defines YANG identities for IANA-registered - interface types. - - This YANG module is maintained by IANA and reflects the - 'ifType definitions' registry. - - The latest revision of this YANG module can be obtained from - the IANA web site. - - Requests for new values should be made to IANA via - email (iana@iana.org). - - Copyright (c) 2014 IETF Trust and the persons identified as - authors of the code. All rights reserved. - - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD License - set forth in Section 4.c of the IETF Trust's Legal Provisions - Relating to IETF Documents - (http://trustee.ietf.org/license-info). - - The initial version of this YANG module is part of RFC 7224; - see the RFC itself for full legal notices."; - - reference - "IANA 'ifType definitions' registry. - <http://www.iana.org/assignments/smi-numbers>"; - - - revision "2014-05-08" { - description "Initial revision."; - reference - "RFC 7224: IANA Interface Type YANG Module"; - - } - - - identity iana-interface-type { - base if:interface-type; - description - "This identity is used as a base for all interface types - defined in the 'ifType definitions' registry."; - } - - identity other { - base iana-interface-type; - } - - identity regular1822 { - base iana-interface-type; - } - - identity hdh1822 { - base iana-interface-type; - } - - identity ddnX25 { - base iana-interface-type; - } - - identity rfc877x25 { - base iana-interface-type; - reference - "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer"; - - } - - identity ethernetCsmacd { - base iana-interface-type; - description - "For all Ethernet-like interfaces, regardless of speed, - as per RFC 3635."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity iso88023Csmacd { - base iana-interface-type; - status deprecated; - description - "Deprecated via RFC 3635. - Use ethernetCsmacd(6) instead."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity iso88024TokenBus { - base iana-interface-type; - } - - identity iso88025TokenRing { - base iana-interface-type; - } - - identity iso88026Man { - base iana-interface-type; - } - - identity starLan { - base iana-interface-type; - status deprecated; - description - "Deprecated via RFC 3635. - Use ethernetCsmacd(6) instead."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity proteon10Mbit { - base iana-interface-type; - } - - identity proteon80Mbit { - base iana-interface-type; - } - - identity hyperchannel { - base iana-interface-type; - } - - identity fddi { - base iana-interface-type; - reference - "RFC 1512 - FDDI Management Information Base"; - - } - - identity lapb { - base iana-interface-type; - reference - "RFC 1381 - SNMP MIB Extension for X.25 LAPB"; - - } - - identity sdlc { - base iana-interface-type; - } - - identity ds1 { - base iana-interface-type; - description "DS1-MIB."; - reference - "RFC 4805 - Definitions of Managed Objects for the - DS1, J1, E1, DS2, and E2 Interface Types"; - - } - - identity e1 { - base iana-interface-type; - status obsolete; - description "Obsolete; see DS1-MIB."; - reference - "RFC 4805 - Definitions of Managed Objects for the - DS1, J1, E1, DS2, and E2 Interface Types"; - - } - - identity basicISDN { - base iana-interface-type; - description - "No longer used. See also RFC 2127."; - } - - identity primaryISDN { - base iana-interface-type; - description - "No longer used. See also RFC 2127."; - } - - identity propPointToPointSerial { - base iana-interface-type; - description "Proprietary serial."; - } - - identity ppp { - base iana-interface-type; - } - - identity softwareLoopback { - base iana-interface-type; - } - - identity eon { - base iana-interface-type; - description "CLNP over IP."; - } - - identity ethernet3Mbit { - base iana-interface-type; - } - - identity nsip { - base iana-interface-type; - description "XNS over IP."; - } - - identity slip { - base iana-interface-type; - description "Generic SLIP."; - } - - identity ultra { - base iana-interface-type; - description "Ultra Technologies."; - } - - identity ds3 { - base iana-interface-type; - description "DS3-MIB."; - reference - "RFC 3896 - Definitions of Managed Objects for the - DS3/E3 Interface Type"; - - } - - identity sip { - base iana-interface-type; - description "SMDS, coffee."; - reference - "RFC 1694 - Definitions of Managed Objects for SMDS - Interfaces using SMIv2"; - - } - - identity frameRelay { - base iana-interface-type; - description "DTE only."; - reference - "RFC 2115 - Management Information Base for Frame Relay - DTEs Using SMIv2"; - - } - - identity rs232 { - base iana-interface-type; - reference - "RFC 1659 - Definitions of Managed Objects for RS-232-like - Hardware Devices using SMIv2"; - - } - - identity para { - base iana-interface-type; - description "Parallel-port."; - reference - "RFC 1660 - Definitions of Managed Objects for - Parallel-printer-like Hardware Devices using - SMIv2"; - - } - - identity arcnet { - base iana-interface-type; - description "ARCnet."; - } - - identity arcnetPlus { - base iana-interface-type; - description "ARCnet Plus."; - } - - identity atm { - base iana-interface-type; - description "ATM cells."; - } - - identity miox25 { - base iana-interface-type; - reference - "RFC 1461 - SNMP MIB extension for Multiprotocol - Interconnect over X.25"; - - } - - identity sonet { - base iana-interface-type; - description "SONET or SDH."; - } - - identity x25ple { - base iana-interface-type; - reference - "RFC 2127 - ISDN Management Information Base using SMIv2"; - - } - - identity iso88022llc { - base iana-interface-type; - } - - identity localTalk { - base iana-interface-type; - } - - identity smdsDxi { - base iana-interface-type; - } - - identity frameRelayService { - base iana-interface-type; - description "FRNETSERV-MIB."; - reference - "RFC 2954 - Definitions of Managed Objects for Frame - Relay Service"; - - } - - identity v35 { - base iana-interface-type; - } - - identity hssi { - base iana-interface-type; - } - - identity hippi { - base iana-interface-type; - } - - identity modem { - base iana-interface-type; - description "Generic modem."; - } - - identity aal5 { - base iana-interface-type; - description "AAL5 over ATM."; - } - - identity sonetPath { - base iana-interface-type; - } - - identity sonetVT { - base iana-interface-type; - } - - identity smdsIcip { - base iana-interface-type; - description - "SMDS InterCarrier Interface."; - } - - identity propVirtual { - base iana-interface-type; - description - "Proprietary virtual/internal."; - reference - "RFC 2863 - The Interfaces Group MIB"; - - } - - identity propMultiplexor { - base iana-interface-type; - description - "Proprietary multiplexing."; - reference - "RFC 2863 - The Interfaces Group MIB"; - - } - - identity ieee80212 { - base iana-interface-type; - description "100BaseVG."; - } - - identity fibreChannel { - base iana-interface-type; - description "Fibre Channel."; - } - - identity hippiInterface { - base iana-interface-type; - description "HIPPI interfaces."; - } - - identity frameRelayInterconnect { - base iana-interface-type; - status obsolete; - description - "Obsolete; use either - frameRelay(32) or frameRelayService(44)."; - } - - identity aflane8023 { - base iana-interface-type; - description - "ATM Emulated LAN for 802.3."; - } - - identity aflane8025 { - base iana-interface-type; - description - "ATM Emulated LAN for 802.5."; - } - - identity cctEmul { - base iana-interface-type; - description "ATM Emulated circuit."; - } - - identity fastEther { - base iana-interface-type; - status deprecated; - description - "Obsoleted via RFC 3635. - ethernetCsmacd(6) should be used instead."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity isdn { - base iana-interface-type; - description "ISDN and X.25."; - reference - "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN - in the Packet Mode"; - - } - - identity v11 { - base iana-interface-type; - description "CCITT V.11/X.21."; - } - - identity v36 { - base iana-interface-type; - description "CCITT V.36."; - } - - identity g703at64k { - base iana-interface-type; - description "CCITT G703 at 64Kbps."; - } - - identity g703at2mb { - base iana-interface-type; - status obsolete; - description "Obsolete; see DS1-MIB."; - } - - identity qllc { - base iana-interface-type; - description "SNA QLLC."; - } - - identity fastEtherFX { - base iana-interface-type; - status deprecated; - description - "Obsoleted via RFC 3635. - ethernetCsmacd(6) should be used instead."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity channel { - base iana-interface-type; - description "Channel."; - } - - identity ieee80211 { - base iana-interface-type; - description "Radio spread spectrum."; - } - - identity ibm370parChan { - base iana-interface-type; - description - "IBM System 360/370 OEMI Channel."; - } - - identity escon { - base iana-interface-type; - description - "IBM Enterprise Systems Connection."; - } - - identity dlsw { - base iana-interface-type; - description "Data Link Switching."; - } - - identity isdns { - base iana-interface-type; - description "ISDN S/T interface."; - } - - identity isdnu { - base iana-interface-type; - description "ISDN U interface."; - } - - identity lapd { - base iana-interface-type; - description "Link Access Protocol D."; - } - - identity ipSwitch { - base iana-interface-type; - description "IP Switching Objects."; - } - - identity rsrb { - base iana-interface-type; - description - "Remote Source Route Bridging."; - } - - identity atmLogical { - base iana-interface-type; - description "ATM Logical Port."; - reference - "RFC 3606 - Definitions of Supplemental Managed Objects - for ATM Interface"; - - } - - identity ds0 { - base iana-interface-type; - description "Digital Signal Level 0."; - reference - "RFC 2494 - Definitions of Managed Objects for the DS0 - and DS0 Bundle Interface Type"; - - } - - identity ds0Bundle { - base iana-interface-type; - description - "Group of ds0s on the same ds1."; - reference - "RFC 2494 - Definitions of Managed Objects for the DS0 - and DS0 Bundle Interface Type"; - - } - - identity bsc { - base iana-interface-type; - description "Bisynchronous Protocol."; - } - - identity async { - base iana-interface-type; - description "Asynchronous Protocol."; - } - - identity cnr { - base iana-interface-type; - description "Combat Net Radio."; - } - - identity iso88025Dtr { - base iana-interface-type; - description "ISO 802.5r DTR."; - } - - identity eplrs { - base iana-interface-type; - description "Ext Pos Loc Report Sys."; - } - - identity arap { - base iana-interface-type; - description - "Appletalk Remote Access Protocol."; - } - - identity propCnls { - base iana-interface-type; - description - "Proprietary Connectionless Protocol."; - } - - identity hostPad { - base iana-interface-type; - description - "CCITT-ITU X.29 PAD Protocol."; - } - - identity termPad { - base iana-interface-type; - description - "CCITT-ITU X.3 PAD Facility."; - } - - identity frameRelayMPI { - base iana-interface-type; - description - "Multiproto Interconnect over FR."; - } - - identity x213 { - base iana-interface-type; - description "CCITT-ITU X213."; - } - - identity adsl { - base iana-interface-type; - description - "Asymmetric Digital Subscriber Loop."; - } - - identity radsl { - base iana-interface-type; - description - "Rate-Adapt. Digital Subscriber Loop."; - } - - identity sdsl { - base iana-interface-type; - description - "Symmetric Digital Subscriber Loop."; - } - - identity vdsl { - base iana-interface-type; - description - "Very H-Speed Digital Subscrib. Loop."; - } - - identity iso88025CRFPInt { - base iana-interface-type; - description "ISO 802.5 CRFP."; - } - - identity myrinet { - base iana-interface-type; - description "Myricom Myrinet."; - } - - identity voiceEM { - base iana-interface-type; - description - "Voice recEive and transMit."; - } - - identity voiceFXO { - base iana-interface-type; - description - "Voice Foreign Exchange Office."; - } - - identity voiceFXS { - base iana-interface-type; - description - "Voice Foreign Exchange Station."; - } - - identity voiceEncap { - base iana-interface-type; - description "Voice encapsulation."; - } - - identity voiceOverIp { - base iana-interface-type; - description - "Voice over IP encapsulation."; - } - - identity atmDxi { - base iana-interface-type; - description "ATM DXI."; - } - - identity atmFuni { - base iana-interface-type; - description "ATM FUNI."; - } - - identity atmIma { - base iana-interface-type; - description "ATM IMA."; - } - - identity pppMultilinkBundle { - base iana-interface-type; - description "PPP Multilink Bundle."; - } - - identity ipOverCdlc { - base iana-interface-type; - description "IBM ipOverCdlc."; - } - - identity ipOverClaw { - base iana-interface-type; - description - "IBM Common Link Access to Workstn."; - } - - identity stackToStack { - base iana-interface-type; - description "IBM stackToStack."; - } - - identity virtualIpAddress { - base iana-interface-type; - description "IBM VIPA."; - } - - identity mpc { - base iana-interface-type; - description - "IBM multi-protocol channel support."; - } - - identity ipOverAtm { - base iana-interface-type; - description "IBM ipOverAtm."; - reference - "RFC 2320 - Definitions of Managed Objects for Classical IP - and ARP Over ATM Using SMIv2 (IPOA-MIB)"; - - } - - identity iso88025Fiber { - base iana-interface-type; - description - "ISO 802.5j Fiber Token Ring."; - } - - identity tdlc { - base iana-interface-type; - description - "IBM twinaxial data link control."; - } - - identity gigabitEthernet { - base iana-interface-type; - status deprecated; - description - "Obsoleted via RFC 3635. - ethernetCsmacd(6) should be used instead."; - reference - "RFC 3635 - Definitions of Managed Objects for the - Ethernet-like Interface Types"; - - } - - identity hdlc { - base iana-interface-type; - description "HDLC."; - } - - identity lapf { - base iana-interface-type; - description "LAP F."; - } - - identity v37 { - base iana-interface-type; - description "V.37."; - } - - identity x25mlp { - base iana-interface-type; - description "Multi-Link Protocol."; - } - - identity x25huntGroup { - base iana-interface-type; - description "X25 Hunt Group."; - } - - identity transpHdlc { - base iana-interface-type; - description "Transp HDLC."; - } - - identity interleave { - base iana-interface-type; - description "Interleave channel."; - } - - identity fast { - base iana-interface-type; - description "Fast channel."; - } - - identity ip { - base iana-interface-type; - description - "IP (for APPN HPR in IP networks)."; - } - - identity docsCableMaclayer { - base iana-interface-type; - description "CATV Mac Layer."; - } - - identity docsCableDownstream { - base iana-interface-type; - description - "CATV Downstream interface."; - } - - identity docsCableUpstream { - base iana-interface-type; - description "CATV Upstream interface."; - } - - identity a12MppSwitch { - base iana-interface-type; - description - "Avalon Parallel Processor."; - } - - identity tunnel { - base iana-interface-type; - description "Encapsulation interface."; - } - - identity coffee { - base iana-interface-type; - description "Coffee pot."; - reference - "RFC 2325 - Coffee MIB"; - - } - - identity ces { - base iana-interface-type; - description - "Circuit Emulation Service."; - } - - identity atmSubInterface { - base iana-interface-type; - description "ATM Sub Interface."; - } - - identity l2vlan { - base iana-interface-type; - description - "Layer 2 Virtual LAN using 802.1Q."; - } - - identity l3ipvlan { - base iana-interface-type; - description - "Layer 3 Virtual LAN using IP."; - } - - identity l3ipxvlan { - base iana-interface-type; - description - "Layer 3 Virtual LAN using IPX."; - } - - identity digitalPowerline { - base iana-interface-type; - description "IP over Power Lines."; - } - - identity mediaMailOverIp { - base iana-interface-type; - description "Multimedia Mail over IP."; - } - - identity dtm { - base iana-interface-type; - description - "Dynamic synchronous Transfer Mode."; - } - - identity dcn { - base iana-interface-type; - description - "Data Communications Network."; - } - - identity ipForward { - base iana-interface-type; - description "IP Forwarding Interface."; - } - - identity msdsl { - base iana-interface-type; - description - "Multi-rate Symmetric DSL."; - } - - identity ieee1394 { - base iana-interface-type; - description - "IEEE1394 High Performance Serial Bus."; - } - - identity if-gsn { - base iana-interface-type; - description "HIPPI-6400."; - } - - identity dvbRccMacLayer { - base iana-interface-type; - description "DVB-RCC MAC Layer."; - } - - identity dvbRccDownstream { - base iana-interface-type; - description - "DVB-RCC Downstream Channel."; - } - - identity dvbRccUpstream { - base iana-interface-type; - description - "DVB-RCC Upstream Channel."; - } - - identity atmVirtual { - base iana-interface-type; - description "ATM Virtual Interface."; - } - - identity mplsTunnel { - base iana-interface-type; - description - "MPLS Tunnel Virtual Interface."; - } - - identity srp { - base iana-interface-type; - description "Spatial Reuse Protocol."; - } - - identity voiceOverAtm { - base iana-interface-type; - description "Voice over ATM."; - } - - identity voiceOverFrameRelay { - base iana-interface-type; - description "Voice Over Frame Relay."; - } - - identity idsl { - base iana-interface-type; - description - "Digital Subscriber Loop over ISDN."; - } - - identity compositeLink { - base iana-interface-type; - description - "Avici Composite Link Interface."; - } - - identity ss7SigLink { - base iana-interface-type; - description "SS7 Signaling Link."; - } - - identity propWirelessP2P { - base iana-interface-type; - description - "Prop. P2P wireless interface."; - } - - identity frForward { - base iana-interface-type; - description "Frame Forward Interface."; - } - - identity rfc1483 { - base iana-interface-type; - description - "Multiprotocol over ATM AAL5."; - reference - "RFC 1483 - Multiprotocol Encapsulation over ATM - Adaptation Layer 5"; - - } - - identity usb { - base iana-interface-type; - description "USB Interface."; - } - - identity ieee8023adLag { - base iana-interface-type; - description - "IEEE 802.3ad Link Aggregate."; - } - - identity bgppolicyaccounting { - base iana-interface-type; - description "BGP Policy Accounting."; - } - - identity frf16MfrBundle { - base iana-interface-type; - description - "FRF.16 Multilink Frame Relay."; - } - - identity h323Gatekeeper { - base iana-interface-type; - description "H323 Gatekeeper."; - } - - identity h323Proxy { - base iana-interface-type; - description - "H323 Voice and Video Proxy."; - } - - identity mpls { - base iana-interface-type; - description "MPLS."; - } - - identity mfSigLink { - base iana-interface-type; - description - "Multi-frequency signaling link."; - } - - identity hdsl2 { - base iana-interface-type; - description - "High Bit-Rate DSL - 2nd generation."; - } - - identity shdsl { - base iana-interface-type; - description "Multirate HDSL2."; - } - - identity ds1FDL { - base iana-interface-type; - description - "Facility Data Link (4Kbps) on a DS1."; - } - - identity pos { - base iana-interface-type; - description - "Packet over SONET/SDH Interface."; - } - - identity dvbAsiIn { - base iana-interface-type; - description "DVB-ASI Input."; - } - - identity dvbAsiOut { - base iana-interface-type; - description "DVB-ASI Output."; - } - - identity plc { - base iana-interface-type; - description - "Power Line Communications."; - } - - identity nfas { - base iana-interface-type; - description - "Non-Facility Associated Signaling."; - } - - identity tr008 { - base iana-interface-type; - description "TR008."; - } - - identity gr303RDT { - base iana-interface-type; - description "Remote Digital Terminal."; - } - - identity gr303IDT { - base iana-interface-type; - description - "Integrated Digital Terminal."; - } - - identity isup { - base iana-interface-type; - description "ISUP."; - } - - identity propDocsWirelessMaclayer { - base iana-interface-type; - description - "Cisco proprietary Maclayer."; - } - - identity propDocsWirelessDownstream { - base iana-interface-type; - description - "Cisco proprietary Downstream."; - } - - identity propDocsWirelessUpstream { - base iana-interface-type; - description - "Cisco proprietary Upstream."; - } - - identity hiperlan2 { - base iana-interface-type; - description - "HIPERLAN Type 2 Radio Interface."; - } - - identity propBWAp2Mp { - base iana-interface-type; - description - "PropBroadbandWirelessAccesspt2Multipt (use of this value - for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f - is deprecated, and ieee80216WMAN(237) should be used - instead)."; - } - - identity sonetOverheadChannel { - base iana-interface-type; - description "SONET Overhead Channel."; - } - - identity digitalWrapperOverheadChannel { - base iana-interface-type; - description "Digital Wrapper."; - } - - identity aal2 { - base iana-interface-type; - description "ATM adaptation layer 2."; - } - - identity radioMAC { - base iana-interface-type; - description - "MAC layer over radio links."; - } - - identity atmRadio { - base iana-interface-type; - description "ATM over radio links."; - } - - identity imt { - base iana-interface-type; - description "Inter-Machine Trunks."; - } - - identity mvl { - base iana-interface-type; - description - "Multiple Virtual Lines DSL."; - } - - identity reachDSL { - base iana-interface-type; - description "Long Reach DSL."; - } - - identity frDlciEndPt { - base iana-interface-type; - description - "Frame Relay DLCI End Point."; - } - - identity atmVciEndPt { - base iana-interface-type; - description "ATM VCI End Point."; - } - - identity opticalChannel { - base iana-interface-type; - description "Optical Channel."; - } - - identity opticalTransport { - base iana-interface-type; - description "Optical Transport."; - } - - identity propAtm { - base iana-interface-type; - description "Proprietary ATM."; - } - - identity voiceOverCable { - base iana-interface-type; - description - "Voice Over Cable Interface."; - } - - identity infiniband { - base iana-interface-type; - description "Infiniband."; - } - - identity teLink { - base iana-interface-type; - description "TE Link."; - } - - identity q2931 { - base iana-interface-type; - description "Q.2931."; - } - - identity virtualTg { - base iana-interface-type; - description "Virtual Trunk Group."; - } - - identity sipTg { - base iana-interface-type; - description "SIP Trunk Group."; - } - - identity sipSig { - base iana-interface-type; - description "SIP Signaling."; - } - - identity docsCableUpstreamChannel { - base iana-interface-type; - description "CATV Upstream Channel."; - } - - identity econet { - base iana-interface-type; - description "Acorn Econet."; - } - - identity pon155 { - base iana-interface-type; - description - "FSAN 155Mb Symetrical PON interface."; - } - - identity pon622 { - base iana-interface-type; - description - "FSAN 622Mb Symetrical PON interface."; - } - - identity bridge { - base iana-interface-type; - description - "Transparent bridge interface."; - } - - identity linegroup { - base iana-interface-type; - description - "Interface common to multiple lines."; - } - - identity voiceEMFGD { - base iana-interface-type; - description - "Voice E&M Feature Group D."; - } - - identity voiceFGDEANA { - base iana-interface-type; - description - "Voice FGD Exchange Access North American."; - } - - identity voiceDID { - base iana-interface-type; - description - "Voice Direct Inward Dialing."; - } - - identity mpegTransport { - base iana-interface-type; - description - "MPEG transport interface."; - } - - identity sixToFour { - base iana-interface-type; - status deprecated; - description - "6to4 interface (DEPRECATED)."; - reference - "RFC 4087 - IP Tunnel MIB"; - - } - - identity gtp { - base iana-interface-type; - description - "GTP (GPRS Tunneling Protocol)."; - } - - identity pdnEtherLoop1 { - base iana-interface-type; - description "Paradyne EtherLoop 1."; - } - - identity pdnEtherLoop2 { - base iana-interface-type; - description "Paradyne EtherLoop 2."; - } - - identity opticalChannelGroup { - base iana-interface-type; - description "Optical Channel Group."; - } - - identity homepna { - base iana-interface-type; - description "HomePNA ITU-T G.989."; - } - - identity gfp { - base iana-interface-type; - description - "Generic Framing Procedure (GFP)."; - } - - identity ciscoISLvlan { - base iana-interface-type; - description - "Layer 2 Virtual LAN using Cisco ISL."; - } - - identity actelisMetaLOOP { - base iana-interface-type; - description - "Acteleis proprietary MetaLOOP High Speed Link."; - } - - identity fcipLink { - base iana-interface-type; - description "FCIP Link."; - } - - identity rpr { - base iana-interface-type; - description - "Resilient Packet Ring Interface Type."; - } - - identity qam { - base iana-interface-type; - description "RF Qam Interface."; - } - - identity lmp { - base iana-interface-type; - description - "Link Management Protocol."; - reference - "RFC 4327 - Link Management Protocol (LMP) Management - Information Base (MIB)"; - - } - - identity cblVectaStar { - base iana-interface-type; - description - "Cambridge Broadband Networks Limited VectaStar."; - } - - identity docsCableMCmtsDownstream { - base iana-interface-type; - description - "CATV Modular CMTS Downstream Interface."; - } - - identity adsl2 { - base iana-interface-type; - status deprecated; - description - "Asymmetric Digital Subscriber Loop Version 2 - (DEPRECATED/OBSOLETED - please use adsl2plus(238) - instead)."; - reference - "RFC 4706 - Definitions of Managed Objects for Asymmetric - Digital Subscriber Line 2 (ADSL2)"; - - } - - identity macSecControlledIF { - base iana-interface-type; - description "MACSecControlled."; - } - - identity macSecUncontrolledIF { - base iana-interface-type; - description "MACSecUncontrolled."; - } - - identity aviciOpticalEther { - base iana-interface-type; - description - "Avici Optical Ethernet Aggregate."; - } - - identity atmbond { - base iana-interface-type; - description "atmbond."; - } - - identity voiceFGDOS { - base iana-interface-type; - description - "Voice FGD Operator Services."; - } - - identity mocaVersion1 { - base iana-interface-type; - description - "MultiMedia over Coax Alliance (MoCA) Interface - as documented in information provided privately to IANA."; - } - - identity ieee80216WMAN { - base iana-interface-type; - description - "IEEE 802.16 WMAN interface."; - } - - identity adsl2plus { - base iana-interface-type; - description - "Asymmetric Digital Subscriber Loop Version 2 - - Version 2 Plus and all variants."; - } - - identity dvbRcsMacLayer { - base iana-interface-type; - description "DVB-RCS MAC Layer."; - reference - "RFC 5728 - The SatLabs Group DVB-RCS MIB"; - - } - - identity dvbTdm { - base iana-interface-type; - description "DVB Satellite TDM."; - reference - "RFC 5728 - The SatLabs Group DVB-RCS MIB"; - - } - - identity dvbRcsTdma { - base iana-interface-type; - description "DVB-RCS TDMA."; - reference - "RFC 5728 - The SatLabs Group DVB-RCS MIB"; - - } - - identity x86Laps { - base iana-interface-type; - description - "LAPS based on ITU-T X.86/Y.1323."; - } - - identity wwanPP { - base iana-interface-type; - description "3GPP WWAN."; - } - - identity wwanPP2 { - base iana-interface-type; - description "3GPP2 WWAN."; - } - - identity voiceEBS { - base iana-interface-type; - description - "Voice P-phone EBS physical interface."; - } - - identity ifPwType { - base iana-interface-type; - description - "Pseudowire interface type."; - reference - "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)"; - - } - - identity ilan { - base iana-interface-type; - description - "Internal LAN on a bridge per IEEE 802.1ap."; - } - - identity pip { - base iana-interface-type; - description - "Provider Instance Port on a bridge per IEEE 802.1ah PBB."; - } - - identity aluELP { - base iana-interface-type; - description - "Alcatel-Lucent Ethernet Link Protection."; - } - - identity gpon { - base iana-interface-type; - description - "Gigabit-capable passive optical networks (G-PON) as per - ITU-T G.948."; - } - - identity vdsl2 { - base iana-interface-type; - description - "Very high speed digital subscriber line Version 2 - (as per ITU-T Recommendation G.993.2)."; - reference - "RFC 5650 - Definitions of Managed Objects for Very High - Speed Digital Subscriber Line 2 (VDSL2)"; - - } - - identity capwapDot11Profile { - base iana-interface-type; - description "WLAN Profile Interface."; - reference - "RFC 5834 - Control and Provisioning of Wireless Access - Points (CAPWAP) Protocol Binding MIB for - IEEE 802.11"; - - } - - identity capwapDot11Bss { - base iana-interface-type; - description "WLAN BSS Interface."; - reference - "RFC 5834 - Control and Provisioning of Wireless Access - Points (CAPWAP) Protocol Binding MIB for - IEEE 802.11"; - - } - - identity capwapWtpVirtualRadio { - base iana-interface-type; - description - "WTP Virtual Radio Interface."; - reference - "RFC 5833 - Control and Provisioning of Wireless Access - Points (CAPWAP) Protocol Base MIB"; - - } - - identity bits { - base iana-interface-type; - description "bitsport."; - } - - identity docsCableUpstreamRfPort { - base iana-interface-type; - description - "DOCSIS CATV Upstream RF Port."; - } - - identity cableDownstreamRfPort { - base iana-interface-type; - description "CATV downstream RF Port."; - } - - identity vmwareVirtualNic { - base iana-interface-type; - description - "VMware Virtual Network Interface."; - } - - identity ieee802154 { - base iana-interface-type; - description - "IEEE 802.15.4 WPAN interface."; - reference - "IEEE 802.15.4-2006"; - - } - - identity otnOdu { - base iana-interface-type; - description "OTN Optical Data Unit."; - } - - identity otnOtu { - base iana-interface-type; - description - "OTN Optical channel Transport Unit."; - } - - identity ifVfiType { - base iana-interface-type; - description - "VPLS Forwarding Instance Interface Type."; - } - - identity g9981 { - base iana-interface-type; - description - "G.998.1 bonded interface."; - } - - identity g9982 { - base iana-interface-type; - description - "G.998.2 bonded interface."; - } - - identity g9983 { - base iana-interface-type; - description - "G.998.3 bonded interface."; - } - - identity aluEpon { - base iana-interface-type; - description - "Ethernet Passive Optical Networks (E-PON)."; - } - - identity aluEponOnu { - base iana-interface-type; - description - "EPON Optical Network Unit."; - } - - identity aluEponPhysicalUni { - base iana-interface-type; - description - "EPON physical User to Network interface."; - } - - identity aluEponLogicalLink { - base iana-interface-type; - description - "The emulation of a point-to-point link over the EPON - layer."; - } - - identity aluGponOnu { - base iana-interface-type; - description - "GPON Optical Network Unit."; - reference - "ITU-T G.984.2"; - - } - - identity aluGponPhysicalUni { - base iana-interface-type; - description - "GPON physical User to Network interface."; - reference - "ITU-T G.984.2"; - - } - - identity vmwareNicTeam { - base iana-interface-type; - description "VMware NIC Team."; - } - } // module iana-if-type diff --git a/ctrl/sysrepo-plugins/yang/ietf/ietf-interfaces.yang b/ctrl/sysrepo-plugins/yang/ietf/ietf-interfaces.yang deleted file mode 100644 index f66c205ce..000000000 --- a/ctrl/sysrepo-plugins/yang/ietf/ietf-interfaces.yang +++ /dev/null @@ -1,1123 +0,0 @@ -module ietf-interfaces { - yang-version 1.1; - namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces"; - prefix if; - - import ietf-yang-types { - prefix yang; - } - - organization - "IETF NETMOD (Network Modeling) Working Group"; - - contact - "WG Web: <https://datatracker.ietf.org/wg/netmod/> - WG List: <mailto:netmod@ietf.org> - - Editor: Martin Bjorklund - <mailto:mbj@tail-f.com>"; - - description - "This module contains a collection of YANG definitions for - managing network interfaces. - - Copyright (c) 2018 IETF Trust and the persons identified as - authors of the code. All rights reserved. - - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD License - set forth in Section 4.c of the IETF Trust's Legal Provisions - Relating to IETF Documents - (https://trustee.ietf.org/license-info). - - This version of this YANG module is part of RFC 8343; see - the RFC itself for full legal notices."; - - revision 2018-02-20 { - description - "Updated to support NMDA."; - reference - "RFC 8343: A YANG Data Model for Interface Management"; - } - - revision 2014-05-08 { - description - "Initial revision."; - reference - "RFC 7223: A YANG Data Model for Interface Management"; - } - - /* - * Typedefs - */ - - typedef interface-ref { - type leafref { - path "/if:interfaces/if:interface/if:name"; - } - description - "This type is used by data models that need to reference - interfaces."; - } - - /* - * Identities - */ - - identity interface-type { - description - "Base identity from which specific interface types are - derived."; - } - - /* - * Features - */ - - feature arbitrary-names { - description - "This feature indicates that the device allows user-controlled - interfaces to be named arbitrarily."; - } - feature pre-provisioning { - description - "This feature indicates that the device supports - pre-provisioning of interface configuration, i.e., it is - possible to configure an interface whose physical interface - hardware is not present on the device."; - } - feature if-mib { - description - "This feature indicates that the device implements - the IF-MIB."; - reference - "RFC 2863: The Interfaces Group MIB"; - } - - /* - * Data nodes - */ - - container interfaces { - description - "Interface parameters."; - - list interface { - key "name"; - - description - "The list of interfaces on the device. - - The status of an interface is available in this list in the - operational state. If the configuration of a - system-controlled interface cannot be used by the system - (e.g., the interface hardware present does not match the - interface type), then the configuration is not applied to - the system-controlled interface shown in the operational - state. If the configuration of a user-controlled interface - cannot be used by the system, the configured interface is - not instantiated in the operational state. - - System-controlled interfaces created by the system are - always present in this list in the operational state, - whether or not they are configured."; - - leaf name { - type string; - description - "The name of the interface. - - A device MAY restrict the allowed values for this leaf, - possibly depending on the type of the interface. - For system-controlled interfaces, this leaf is the - device-specific name of the interface. - - If a client tries to create configuration for a - system-controlled interface that is not present in the - operational state, the server MAY reject the request if - the implementation does not support pre-provisioning of - interfaces or if the name refers to an interface that can - never exist in the system. A Network Configuration - Protocol (NETCONF) server MUST reply with an rpc-error - with the error-tag 'invalid-value' in this case. - - If the device supports pre-provisioning of interface - configuration, the 'pre-provisioning' feature is - advertised. - - If the device allows arbitrarily named user-controlled - interfaces, the 'arbitrary-names' feature is advertised. - - When a configured user-controlled interface is created by - the system, it is instantiated with the same name in the - operational state. - - A server implementation MAY map this leaf to the ifName - MIB object. Such an implementation needs to use some - mechanism to handle the differences in size and characters - allowed between this leaf and ifName. The definition of - such a mechanism is outside the scope of this document."; - reference - "RFC 2863: The Interfaces Group MIB - ifName"; - } - - leaf description { - type string; - description - "A textual description of the interface. - - A server implementation MAY map this leaf to the ifAlias - MIB object. Such an implementation needs to use some - mechanism to handle the differences in size and characters - allowed between this leaf and ifAlias. The definition of - such a mechanism is outside the scope of this document. - - Since ifAlias is defined to be stored in non-volatile - storage, the MIB implementation MUST map ifAlias to the - value of 'description' in the persistently stored - configuration."; - reference - "RFC 2863: The Interfaces Group MIB - ifAlias"; - } - - leaf type { - type identityref { - base interface-type; - } - mandatory true; - description - "The type of the interface. - - When an interface entry is created, a server MAY - initialize the type leaf with a valid value, e.g., if it - is possible to derive the type from the name of the - interface. - - If a client tries to set the type of an interface to a - value that can never be used by the system, e.g., if the - type is not supported or if the type does not match the - name of the interface, the server MUST reject the request. - A NETCONF server MUST reply with an rpc-error with the - error-tag 'invalid-value' in this case."; - reference - "RFC 2863: The Interfaces Group MIB - ifType"; - } - - leaf enabled { - type boolean; - default "true"; - description - "This leaf contains the configured, desired state of the - interface. - - Systems that implement the IF-MIB use the value of this - leaf in the intended configuration to set - IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry - has been initialized, as described in RFC 2863. - - Changes in this leaf in the intended configuration are - reflected in ifAdminStatus."; - reference - "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; - } - - leaf link-up-down-trap-enable { - if-feature if-mib; - type enumeration { - enum enabled { - value 1; - description - "The device will generate linkUp/linkDown SNMP - notifications for this interface."; - } - enum disabled { - value 2; - description - "The device will not generate linkUp/linkDown SNMP - notifications for this interface."; - } - } - description - "Controls whether linkUp/linkDown SNMP notifications - should be generated for this interface. - - If this node is not configured, the value 'enabled' is - operationally used by the server for interfaces that do - not operate on top of any other interface (i.e., there are - no 'lower-layer-if' entries), and 'disabled' otherwise."; - reference - "RFC 2863: The Interfaces Group MIB - - ifLinkUpDownTrapEnable"; - } - - leaf admin-status { - if-feature if-mib; - type enumeration { - enum up { - value 1; - description - "Ready to pass packets."; - } - enum down { - value 2; - description - "Not ready to pass packets and not in some test mode."; - } - enum testing { - value 3; - description - "In some test mode."; - } - } - config false; - mandatory true; - description - "The desired state of the interface. - - This leaf has the same read semantics as ifAdminStatus."; - reference - "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; - } - - leaf oper-status { - type enumeration { - enum up { - value 1; - description - "Ready to pass packets."; - } - enum down { - value 2; - - description - "The interface does not pass any packets."; - } - enum testing { - value 3; - description - "In some test mode. No operational packets can - be passed."; - } - enum unknown { - value 4; - description - "Status cannot be determined for some reason."; - } - enum dormant { - value 5; - description - "Waiting for some external event."; - } - enum not-present { - value 6; - description - "Some component (typically hardware) is missing."; - } - enum lower-layer-down { - value 7; - description - "Down due to state of lower-layer interface(s)."; - } - } - config false; - mandatory true; - description - "The current operational state of the interface. - - This leaf has the same semantics as ifOperStatus."; - reference - "RFC 2863: The Interfaces Group MIB - ifOperStatus"; - } - - leaf last-change { - type yang:date-and-time; - config false; - description - "The time the interface entered its current operational - state. If the current state was entered prior to the - last re-initialization of the local network management - subsystem, then this node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - ifLastChange"; - } - - leaf if-index { - if-feature if-mib; - type int32 { - range "1..2147483647"; - } - config false; - mandatory true; - description - "The ifIndex value for the ifEntry represented by this - interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifIndex"; - } - - leaf phys-address { - type yang:phys-address; - config false; - description - "The interface's address at its protocol sub-layer. For - example, for an 802.x interface, this object normally - contains a Media Access Control (MAC) address. The - interface's media-specific modules must define the bit - and byte ordering and the format of the value of this - object. For interfaces that do not have such an address - (e.g., a serial line), this node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; - } - - leaf-list higher-layer-if { - type interface-ref; - config false; - description - "A list of references to interfaces layered on top of this - interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifStackTable"; - } - - leaf-list lower-layer-if { - type interface-ref; - config false; - - description - "A list of references to interfaces layered underneath this - interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifStackTable"; - } - - leaf speed { - type yang:gauge64; - units "bits/second"; - config false; - description - "An estimate of the interface's current bandwidth in bits - per second. For interfaces that do not vary in - bandwidth or for those where no accurate estimation can - be made, this node should contain the nominal bandwidth. - For interfaces that have no concept of bandwidth, this - node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - - ifSpeed, ifHighSpeed"; - } - - container statistics { - config false; - description - "A collection of interface-related statistics objects."; - - leaf discontinuity-time { - type yang:date-and-time; - mandatory true; - description - "The time on the most recent occasion at which any one or - more of this interface's counters suffered a - discontinuity. If no such discontinuities have occurred - since the last re-initialization of the local management - subsystem, then this node contains the time the local - management subsystem re-initialized itself."; - } - - leaf in-octets { - type yang:counter64; - description - "The total number of octets received on the interface, - including framing characters. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; - } - - leaf in-unicast-pkts { - type yang:counter64; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were not addressed to a - multicast or broadcast address at this sub-layer. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; - } - - leaf in-broadcast-pkts { - type yang:counter64; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were addressed to a broadcast - address at this sub-layer. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCInBroadcastPkts"; - } - - leaf in-multicast-pkts { - type yang:counter64; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were addressed to a multicast - address at this sub-layer. For a MAC-layer protocol, - this includes both Group and Functional addresses. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCInMulticastPkts"; - } - - leaf in-discards { - type yang:counter32; - description - "The number of inbound packets that were chosen to be - discarded even though no errors had been detected to - prevent their being deliverable to a higher-layer - protocol. One possible reason for discarding such a - packet could be to free up buffer space. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInDiscards"; - } - - leaf in-errors { - type yang:counter32; - description - "For packet-oriented interfaces, the number of inbound - packets that contained errors preventing them from being - deliverable to a higher-layer protocol. For character- - oriented or fixed-length interfaces, the number of - inbound transmission units that contained errors - preventing them from being deliverable to a higher-layer - protocol. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInErrors"; - } - - leaf in-unknown-protos { - type yang:counter32; - - description - "For packet-oriented interfaces, the number of packets - received via the interface that were discarded because - of an unknown or unsupported protocol. For - character-oriented or fixed-length interfaces that - support protocol multiplexing, the number of - transmission units received via the interface that were - discarded because of an unknown or unsupported protocol. - For any interface that does not support protocol - multiplexing, this counter is not present. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; - } - - leaf out-octets { - type yang:counter64; - description - "The total number of octets transmitted out of the - interface, including framing characters. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; - } - - leaf out-unicast-pkts { - type yang:counter64; - description - "The total number of packets that higher-level protocols - requested be transmitted and that were not addressed - to a multicast or broadcast address at this sub-layer, - including those that were discarded or not sent. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; - } - - leaf out-broadcast-pkts { - type yang:counter64; - description - "The total number of packets that higher-level protocols - requested be transmitted and that were addressed to a - broadcast address at this sub-layer, including those - that were discarded or not sent. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCOutBroadcastPkts"; - } - - leaf out-multicast-pkts { - type yang:counter64; - description - "The total number of packets that higher-level protocols - requested be transmitted and that were addressed to a - multicast address at this sub-layer, including those - that were discarded or not sent. For a MAC-layer - protocol, this includes both Group and Functional - addresses. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCOutMulticastPkts"; - } - - leaf out-discards { - type yang:counter32; - description - "The number of outbound packets that were chosen to be - discarded even though no errors had been detected to - prevent their being transmitted. One possible reason - for discarding such a packet could be to free up buffer - space. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; - } - - leaf out-errors { - type yang:counter32; - description - "For packet-oriented interfaces, the number of outbound - packets that could not be transmitted because of errors. - For character-oriented or fixed-length interfaces, the - number of outbound transmission units that could not be - transmitted because of errors. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifOutErrors"; - } - } - - } - } - - /* - * Legacy typedefs - */ - - typedef interface-state-ref { - type leafref { - path "/if:interfaces-state/if:interface/if:name"; - } - status deprecated; - description - "This type is used by data models that need to reference - the operationally present interfaces."; - } - - /* - * Legacy operational state data nodes - */ - - container interfaces-state { - config false; - status deprecated; - description - "Data nodes for the operational state of interfaces."; - - list interface { - key "name"; - status deprecated; - - description - "The list of interfaces on the device. - - System-controlled interfaces created by the system are - always present in this list, whether or not they are - configured."; - - leaf name { - type string; - status deprecated; - description - "The name of the interface. - - A server implementation MAY map this leaf to the ifName - MIB object. Such an implementation needs to use some - mechanism to handle the differences in size and characters - allowed between this leaf and ifName. The definition of - such a mechanism is outside the scope of this document."; - reference - "RFC 2863: The Interfaces Group MIB - ifName"; - } - - leaf type { - type identityref { - base interface-type; - } - mandatory true; - status deprecated; - description - "The type of the interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifType"; - } - - leaf admin-status { - if-feature if-mib; - type enumeration { - enum up { - value 1; - description - "Ready to pass packets."; - } - enum down { - value 2; - description - "Not ready to pass packets and not in some test mode."; - } - enum testing { - value 3; - description - "In some test mode."; - } - } - mandatory true; - status deprecated; - description - "The desired state of the interface. - - This leaf has the same read semantics as ifAdminStatus."; - reference - "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; - } - - leaf oper-status { - type enumeration { - enum up { - value 1; - description - "Ready to pass packets."; - } - enum down { - value 2; - description - "The interface does not pass any packets."; - } - enum testing { - value 3; - description - "In some test mode. No operational packets can - be passed."; - } - enum unknown { - value 4; - description - "Status cannot be determined for some reason."; - } - enum dormant { - value 5; - description - "Waiting for some external event."; - } - enum not-present { - value 6; - description - "Some component (typically hardware) is missing."; - } - enum lower-layer-down { - value 7; - description - "Down due to state of lower-layer interface(s)."; - } - } - mandatory true; - status deprecated; - description - "The current operational state of the interface. - - This leaf has the same semantics as ifOperStatus."; - reference - "RFC 2863: The Interfaces Group MIB - ifOperStatus"; - } - - leaf last-change { - type yang:date-and-time; - status deprecated; - description - "The time the interface entered its current operational - state. If the current state was entered prior to the - last re-initialization of the local network management - subsystem, then this node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - ifLastChange"; - } - - leaf if-index { - if-feature if-mib; - type int32 { - range "1..2147483647"; - } - mandatory true; - status deprecated; - description - "The ifIndex value for the ifEntry represented by this - interface."; - - reference - "RFC 2863: The Interfaces Group MIB - ifIndex"; - } - - leaf phys-address { - type yang:phys-address; - status deprecated; - description - "The interface's address at its protocol sub-layer. For - example, for an 802.x interface, this object normally - contains a Media Access Control (MAC) address. The - interface's media-specific modules must define the bit - and byte ordering and the format of the value of this - object. For interfaces that do not have such an address - (e.g., a serial line), this node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; - } - - leaf-list higher-layer-if { - type interface-state-ref; - status deprecated; - description - "A list of references to interfaces layered on top of this - interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifStackTable"; - } - - leaf-list lower-layer-if { - type interface-state-ref; - status deprecated; - description - "A list of references to interfaces layered underneath this - interface."; - reference - "RFC 2863: The Interfaces Group MIB - ifStackTable"; - } - - leaf speed { - type yang:gauge64; - units "bits/second"; - status deprecated; - description - "An estimate of the interface's current bandwidth in bits - per second. For interfaces that do not vary in - bandwidth or for those where no accurate estimation can - - be made, this node should contain the nominal bandwidth. - For interfaces that have no concept of bandwidth, this - node is not present."; - reference - "RFC 2863: The Interfaces Group MIB - - ifSpeed, ifHighSpeed"; - } - - container statistics { - status deprecated; - description - "A collection of interface-related statistics objects."; - - leaf discontinuity-time { - type yang:date-and-time; - mandatory true; - status deprecated; - description - "The time on the most recent occasion at which any one or - more of this interface's counters suffered a - discontinuity. If no such discontinuities have occurred - since the last re-initialization of the local management - subsystem, then this node contains the time the local - management subsystem re-initialized itself."; - } - - leaf in-octets { - type yang:counter64; - status deprecated; - description - "The total number of octets received on the interface, - including framing characters. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; - } - - leaf in-unicast-pkts { - type yang:counter64; - status deprecated; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were not addressed to a - multicast or broadcast address at this sub-layer. - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; - } - - leaf in-broadcast-pkts { - type yang:counter64; - status deprecated; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were addressed to a broadcast - address at this sub-layer. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCInBroadcastPkts"; - } - - leaf in-multicast-pkts { - type yang:counter64; - status deprecated; - description - "The number of packets, delivered by this sub-layer to a - higher (sub-)layer, that were addressed to a multicast - address at this sub-layer. For a MAC-layer protocol, - this includes both Group and Functional addresses. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCInMulticastPkts"; - } - - leaf in-discards { - type yang:counter32; - status deprecated; - - description - "The number of inbound packets that were chosen to be - discarded even though no errors had been detected to - prevent their being deliverable to a higher-layer - protocol. One possible reason for discarding such a - packet could be to free up buffer space. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInDiscards"; - } - - leaf in-errors { - type yang:counter32; - status deprecated; - description - "For packet-oriented interfaces, the number of inbound - packets that contained errors preventing them from being - deliverable to a higher-layer protocol. For character- - oriented or fixed-length interfaces, the number of - inbound transmission units that contained errors - preventing them from being deliverable to a higher-layer - protocol. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInErrors"; - } - - leaf in-unknown-protos { - type yang:counter32; - status deprecated; - description - "For packet-oriented interfaces, the number of packets - received via the interface that were discarded because - of an unknown or unsupported protocol. For - character-oriented or fixed-length interfaces that - support protocol multiplexing, the number of - transmission units received via the interface that were - discarded because of an unknown or unsupported protocol. - For any interface that does not support protocol - multiplexing, this counter is not present. - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; - } - - leaf out-octets { - type yang:counter64; - status deprecated; - description - "The total number of octets transmitted out of the - interface, including framing characters. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; - } - - leaf out-unicast-pkts { - type yang:counter64; - status deprecated; - description - "The total number of packets that higher-level protocols - requested be transmitted and that were not addressed - to a multicast or broadcast address at this sub-layer, - including those that were discarded or not sent. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; - } - - leaf out-broadcast-pkts { - type yang:counter64; - status deprecated; - - description - "The total number of packets that higher-level protocols - requested be transmitted and that were addressed to a - broadcast address at this sub-layer, including those - that were discarded or not sent. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCOutBroadcastPkts"; - } - - leaf out-multicast-pkts { - type yang:counter64; - status deprecated; - description - "The total number of packets that higher-level protocols - requested be transmitted and that were addressed to a - multicast address at this sub-layer, including those - that were discarded or not sent. For a MAC-layer - protocol, this includes both Group and Functional - addresses. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - - ifHCOutMulticastPkts"; - } - - leaf out-discards { - type yang:counter32; - status deprecated; - description - "The number of outbound packets that were chosen to be - discarded even though no errors had been detected to - prevent their being transmitted. One possible reason - for discarding such a packet could be to free up buffer - space. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; - } - - leaf out-errors { - type yang:counter32; - status deprecated; - description - "For packet-oriented interfaces, the number of outbound - packets that could not be transmitted because of errors. - For character-oriented or fixed-length interfaces, the - number of outbound transmission units that could not be - transmitted because of errors. - - Discontinuities in the value of this counter can occur - at re-initialization of the management system and at - other times as indicated by the value of - 'discontinuity-time'."; - reference - "RFC 2863: The Interfaces Group MIB - ifOutErrors"; - } - } - } - } -} diff --git a/ctrl/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang b/ctrl/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang deleted file mode 100644 index 79606cc07..000000000 --- a/ctrl/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang +++ /dev/null @@ -1,742 +0,0 @@ -module ietf-ip { - - yang-version 1; - - namespace - "urn:ietf:params:xml:ns:yang:ietf-ip"; - - prefix ip; - - import ietf-interfaces { - prefix if; - } - import ietf-inet-types { - prefix inet; - } - import ietf-yang-types { - prefix yang; - } - - organization - "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; - - contact - "WG Web: <http://tools.ietf.org/wg/netmod/> - WG List: <mailto:netmod@ietf.org> - - WG Chair: Thomas Nadeau - <mailto:tnadeau@lucidvision.com> - - WG Chair: Juergen Schoenwaelder - <mailto:j.schoenwaelder@jacobs-university.de> - - Editor: Martin Bjorklund - <mailto:mbj@tail-f.com>"; - - description - "This module contains a collection of YANG definitions for - configuring IP implementations. - - Copyright (c) 2014 IETF Trust and the persons identified as - authors of the code. All rights reserved. - - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD License - set forth in Section 4.c of the IETF Trust's Legal Provisions - Relating to IETF Documents - (http://trustee.ietf.org/license-info). - - This version of this YANG module is part of RFC 7277; see - the RFC itself for full legal notices."; - - revision "2014-06-16" { - description "Initial revision."; - reference - "RFC 7277: A YANG Data Model for IP Management"; - - } - - - feature ipv4-non-contiguous-netmasks { - description - "Indicates support for configuring non-contiguous - subnet masks."; - } - - feature ipv6-privacy-autoconf { - description - "Indicates support for Privacy Extensions for Stateless Address - Autoconfiguration in IPv6."; - reference - "RFC 4941: Privacy Extensions for Stateless Address - Autoconfiguration in IPv6"; - - } - - typedef ip-address-origin { - type enumeration { - enum "other" { - value 0; - description - "None of the following."; - } - enum "static" { - value 1; - description - "Indicates that the address has been statically - configured - for example, using NETCONF or a Command Line - Interface."; - } - enum "dhcp" { - value 2; - description - "Indicates an address that has been assigned to this - system by a DHCP server."; - } - enum "link-layer" { - value 3; - description - "Indicates an address created by IPv6 stateless - autoconfiguration that embeds a link-layer address in its - interface identifier."; - } - enum "random" { - value 4; - description - "Indicates an address chosen by the system at - - random, e.g., an IPv4 address within 169.254/16, an - RFC 4941 temporary address, or an RFC 7217 semantically - opaque address."; - reference - "RFC 4941: Privacy Extensions for Stateless Address - Autoconfiguration in IPv6 - RFC 7217: A Method for Generating Semantically Opaque - Interface Identifiers with IPv6 Stateless - Address Autoconfiguration (SLAAC)"; - - } - } - description - "The origin of an address."; - } - - typedef neighbor-origin { - type enumeration { - enum "other" { - value 0; - description - "None of the following."; - } - enum "static" { - value 1; - description - "Indicates that the mapping has been statically - configured - for example, using NETCONF or a Command Line - Interface."; - } - enum "dynamic" { - value 2; - description - "Indicates that the mapping has been dynamically resolved - using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery - protocol."; - } - } - description - "The origin of a neighbor entry."; - } - - augment /if:interfaces/if:interface { - description - "Parameters for configuring IP on interfaces. - - If an interface is not capable of running IP, the server - must not allow the client to configure these parameters."; - container ipv4 { - presence - "Enables IPv4 unless the 'enabled' leaf - (which defaults to 'true') is set to 'false'"; - description - "Parameters for the IPv4 address family."; - leaf enabled { - type boolean; - default 'true'; - description - "Controls whether IPv4 is enabled or disabled on this - interface. When IPv4 is enabled, this interface is - connected to an IPv4 stack, and the interface can send - and receive IPv4 packets."; - } - - leaf forwarding { - type boolean; - default 'false'; - description - "Controls IPv4 packet forwarding of datagrams received by, - but not addressed to, this interface. IPv4 routers - forward datagrams. IPv4 hosts do not (except those - source-routed via the host)."; - } - - leaf mtu { - type uint16 { - range "68..max"; - } - units "octets"; - description - "The size, in octets, of the largest IPv4 packet that the - interface will send and receive. - - The server may restrict the allowed values for this leaf, - depending on the interface's type. - - If this leaf is not configured, the operationally used MTU - depends on the interface's type."; - reference - "RFC 791: Internet Protocol"; - - } - - list address { - key "ip"; - description - "The list of configured IPv4 addresses on the interface."; - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address on the interface."; - } - - choice subnet { - mandatory true; - description - "The subnet can be specified as a prefix-length, or, - if the server supports non-contiguous netmasks, as - a netmask."; - leaf prefix-length { - type uint8 { - range "0..32"; - } - description - "The length of the subnet prefix."; - } - leaf netmask { - if-feature ipv4-non-contiguous-netmasks; - type yang:dotted-quad; - description - "The subnet specified as a netmask."; - } - } // choice subnet - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv4 addresses to - link-layer addresses. - - Entries in this list are used as static entries in the - ARP Cache."; - reference - "RFC 826: An Ethernet Address Resolution Protocol"; - - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - mandatory true; - description - "The link-layer address of the neighbor node."; - } - } // list neighbor - } // container ipv4 - - container ipv6 { - presence - "Enables IPv6 unless the 'enabled' leaf - (which defaults to 'true') is set to 'false'"; - description - "Parameters for the IPv6 address family."; - leaf enabled { - type boolean; - default 'true'; - description - "Controls whether IPv6 is enabled or disabled on this - interface. When IPv6 is enabled, this interface is - connected to an IPv6 stack, and the interface can send - and receive IPv6 packets."; - } - - leaf forwarding { - type boolean; - default 'false'; - description - "Controls IPv6 packet forwarding of datagrams received by, - but not addressed to, this interface. IPv6 routers - forward datagrams. IPv6 hosts do not (except those - source-routed via the host)."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - Section 6.2.1, IsRouter"; - - } - - leaf mtu { - type uint32 { - range "1280..max"; - } - units "octets"; - description - "The size, in octets, of the largest IPv6 packet that the - interface will send and receive. - - The server may restrict the allowed values for this leaf, - depending on the interface's type. - - If this leaf is not configured, the operationally used MTU - depends on the interface's type."; - reference - "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification - Section 5"; - - } - - list address { - key "ip"; - description - "The list of configured IPv6 addresses on the interface."; - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address on the interface."; - } - - leaf prefix-length { - type uint8 { - range "0..128"; - } - mandatory true; - description - "The length of the subnet prefix."; - } - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv6 addresses to - link-layer addresses. - - Entries in this list are used as static entries in the - Neighbor Cache."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)"; - - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - mandatory true; - description - "The link-layer address of the neighbor node."; - } - } // list neighbor - - leaf dup-addr-detect-transmits { - type uint32; - default '1'; - description - "The number of consecutive Neighbor Solicitation messages - sent while performing Duplicate Address Detection on a - tentative address. A value of zero indicates that - Duplicate Address Detection is not performed on - tentative addresses. A value of one indicates a single - transmission with no follow-up retransmissions."; - reference - "RFC 4862: IPv6 Stateless Address Autoconfiguration"; - - } - - container autoconf { - description - "Parameters to control the autoconfiguration of IPv6 - addresses, as described in RFC 4862."; - reference - "RFC 4862: IPv6 Stateless Address Autoconfiguration"; - - leaf create-global-addresses { - type boolean; - default 'true'; - description - "If enabled, the host creates global addresses as - described in RFC 4862."; - reference - "RFC 4862: IPv6 Stateless Address Autoconfiguration - Section 5.5"; - - } - - leaf create-temporary-addresses { - if-feature ipv6-privacy-autoconf; - type boolean; - default 'false'; - description - "If enabled, the host creates temporary addresses as - described in RFC 4941."; - reference - "RFC 4941: Privacy Extensions for Stateless Address - Autoconfiguration in IPv6"; - - } - - leaf temporary-valid-lifetime { - if-feature ipv6-privacy-autoconf; - type uint32; - units "seconds"; - default '604800'; - description - "The time period during which the temporary address - is valid."; - reference - "RFC 4941: Privacy Extensions for Stateless Address - Autoconfiguration in IPv6 - - TEMP_VALID_LIFETIME"; - - } - - leaf temporary-preferred-lifetime { - if-feature ipv6-privacy-autoconf; - type uint32; - units "seconds"; - default '86400'; - description - "The time period during which the temporary address is - preferred."; - reference - "RFC 4941: Privacy Extensions for Stateless Address - Autoconfiguration in IPv6 - - TEMP_PREFERRED_LIFETIME"; - - } - } // container autoconf - } // container ipv6 - } - - augment /if:interfaces-state/if:interface { - description - "Data nodes for the operational state of IP on interfaces."; - container ipv4 { - presence - "Present if IPv4 is enabled on this interface"; - config false; - description - "Interface-specific parameters for the IPv4 address family."; - leaf forwarding { - type boolean; - description - "Indicates whether IPv4 packet forwarding is enabled or - disabled on this interface."; - } - - leaf mtu { - type uint16 { - range "68..max"; - } - units "octets"; - description - "The size, in octets, of the largest IPv4 packet that the - interface will send and receive."; - reference - "RFC 791: Internet Protocol"; - - } - - list address { - key "ip"; - description - "The list of IPv4 addresses on the interface."; - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address on the interface."; - } - - choice subnet { - description - "The subnet can be specified as a prefix-length, or, - if the server supports non-contiguous netmasks, as - a netmask."; - leaf prefix-length { - type uint8 { - range "0..32"; - } - description - "The length of the subnet prefix."; - } - leaf netmask { - if-feature ipv4-non-contiguous-netmasks; - type yang:dotted-quad; - description - "The subnet specified as a netmask."; - } - } // choice subnet - - leaf origin { - type ip-address-origin; - description - "The origin of this address."; - } - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv4 addresses to - link-layer addresses. - - This list represents the ARP Cache."; - reference - "RFC 826: An Ethernet Address Resolution Protocol"; - - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - description - "The link-layer address of the neighbor node."; - } - - leaf origin { - type neighbor-origin; - description - "The origin of this neighbor entry."; - } - } // list neighbor - } // container ipv4 - - container ipv6 { - presence - "Present if IPv6 is enabled on this interface"; - config false; - description - "Parameters for the IPv6 address family."; - leaf forwarding { - type boolean; - default 'false'; - description - "Indicates whether IPv6 packet forwarding is enabled or - disabled on this interface."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - Section 6.2.1, IsRouter"; - - } - - leaf mtu { - type uint32 { - range "1280..max"; - } - units "octets"; - description - "The size, in octets, of the largest IPv6 packet that the - interface will send and receive."; - reference - "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification - Section 5"; - - } - - list address { - key "ip"; - description - "The list of IPv6 addresses on the interface."; - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address on the interface."; - } - - leaf prefix-length { - type uint8 { - range "0..128"; - } - mandatory true; - description - "The length of the subnet prefix."; - } - - leaf origin { - type ip-address-origin; - description - "The origin of this address."; - } - - leaf status { - type enumeration { - enum "preferred" { - value 0; - description - "This is a valid address that can appear as the - destination or source address of a packet."; - } - enum "deprecated" { - value 1; - description - "This is a valid but deprecated address that should - no longer be used as a source address in new - communications, but packets addressed to such an - address are processed as expected."; - } - enum "invalid" { - value 2; - description - "This isn't a valid address, and it shouldn't appear - as the destination or source address of a packet."; - } - enum "inaccessible" { - value 3; - description - "The address is not accessible because the interface - to which this address is assigned is not - operational."; - } - enum "unknown" { - value 4; - description - "The status cannot be determined for some reason."; - } - enum "tentative" { - value 5; - description - "The uniqueness of the address on the link is being - verified. Addresses in this state should not be - used for general communication and should only be - used to determine the uniqueness of the address."; - } - enum "duplicate" { - value 6; - description - "The address has been determined to be non-unique on - the link and so must not be used."; - } - enum "optimistic" { - value 7; - description - "The address is available for use, subject to - restrictions, while its uniqueness on a link is - being verified."; - } - } - description - "The status of an address. Most of the states correspond - to states from the IPv6 Stateless Address - Autoconfiguration protocol."; - reference - "RFC 4293: Management Information Base for the - Internet Protocol (IP) - - IpAddressStatusTC - RFC 4862: IPv6 Stateless Address Autoconfiguration"; - - } - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv6 addresses to - link-layer addresses. - - This list represents the Neighbor Cache."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)"; - - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - description - "The link-layer address of the neighbor node."; - } - - leaf origin { - type neighbor-origin; - description - "The origin of this neighbor entry."; - } - - leaf is-router { - type empty; - description - "Indicates that the neighbor node acts as a router."; - } - - leaf state { - type enumeration { - enum "incomplete" { - value 0; - description - "Address resolution is in progress, and the link-layer - address of the neighbor has not yet been - determined."; - } - enum "reachable" { - value 1; - description - "Roughly speaking, the neighbor is known to have been - reachable recently (within tens of seconds ago)."; - } - enum "stale" { - value 2; - description - "The neighbor is no longer known to be reachable, but - until traffic is sent to the neighbor no attempt - should be made to verify its reachability."; - } - enum "delay" { - value 3; - description - "The neighbor is no longer known to be reachable, and - traffic has recently been sent to the neighbor. - Rather than probe the neighbor immediately, however, - delay sending probes for a short while in order to - give upper-layer protocols a chance to provide - reachability confirmation."; - } - enum "probe" { - value 4; - description - "The neighbor is no longer known to be reachable, and - unicast Neighbor Solicitation probes are being sent - to verify reachability."; - } - } - description - "The Neighbor Unreachability Detection state of this - entry."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) - Section 7.3.2"; - - } - } // list neighbor - } // container ipv6 - } - } // module ietf-ip diff --git a/ctrl/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang b/ctrl/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang deleted file mode 100644 index ee58fa3ab..000000000 --- a/ctrl/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang +++ /dev/null @@ -1,474 +0,0 @@ -module ietf-yang-types { - - namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types"; - prefix "yang"; - - organization - "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; - - contact - "WG Web: <http://tools.ietf.org/wg/netmod/> - WG List: <mailto:netmod@ietf.org> - - WG Chair: David Kessens - <mailto:david.kessens@nsn.com> - - WG Chair: Juergen Schoenwaelder - <mailto:j.schoenwaelder@jacobs-university.de> - - Editor: Juergen Schoenwaelder - <mailto:j.schoenwaelder@jacobs-university.de>"; - - description - "This module contains a collection of generally useful derived - YANG data types. - - Copyright (c) 2013 IETF Trust and the persons identified as - authors of the code. All rights reserved. - - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD License - set forth in Section 4.c of the IETF Trust's Legal Provisions - Relating to IETF Documents - (http://trustee.ietf.org/license-info). - - This version of this YANG module is part of RFC 6991; see - the RFC itself for full legal notices."; - - revision 2013-07-15 { - description - "This revision adds the following new data types: - - yang-identifier - - hex-string - - uuid - - dotted-quad"; - reference - "RFC 6991: Common YANG Data Types"; - } - - revision 2010-09-24 { - description - "Initial revision."; - reference - "RFC 6021: Common YANG Data Types"; - } - - /*** collection of counter and gauge types ***/ - - typedef counter32 { - type uint32; - description - "The counter32 type represents a non-negative integer - that monotonically increases until it reaches a - maximum value of 2^32-1 (4294967295 decimal), when it - wraps around and starts increasing again from zero. - - Counters have no defined 'initial' value, and thus, a - single value of a counter has (in general) no information - content. Discontinuities in the monotonically increasing - value normally occur at re-initialization of the - management system, and at other times as specified in the - description of a schema node using this type. If such - other times can occur, for example, the creation of - a schema node of type counter32 at times other than - re-initialization, then a corresponding schema node - should be defined, with an appropriate type, to indicate - the last discontinuity. - - The counter32 type should not be used for configuration - schema nodes. A default statement SHOULD NOT be used in - combination with the type counter32. - - In the value set and its semantics, this type is equivalent - to the Counter32 type of the SMIv2."; - reference - "RFC 2578: Structure of Management Information Version 2 - (SMIv2)"; - } - - typedef zero-based-counter32 { - type yang:counter32; - default "0"; - description - "The zero-based-counter32 type represents a counter32 - that has the defined 'initial' value zero. - - A schema node of this type will be set to zero (0) on creation - and will thereafter increase monotonically until it reaches - a maximum value of 2^32-1 (4294967295 decimal), when it - wraps around and starts increasing again from zero. - - Provided that an application discovers a new schema node - of this type within the minimum time to wrap, it can use the - 'initial' value as a delta. It is important for a management - station to be aware of this minimum time and the actual time - between polls, and to discard data if the actual time is too - long or there is no defined minimum time. - - In the value set and its semantics, this type is equivalent - to the ZeroBasedCounter32 textual convention of the SMIv2."; - reference - "RFC 4502: Remote Network Monitoring Management Information - Base Version 2"; - } - - typedef counter64 { - type uint64; - description - "The counter64 type represents a non-negative integer - that monotonically increases until it reaches a - maximum value of 2^64-1 (18446744073709551615 decimal), - when it wraps around and starts increasing again from zero. - - Counters have no defined 'initial' value, and thus, a - single value of a counter has (in general) no information - content. Discontinuities in the monotonically increasing - value normally occur at re-initialization of the - management system, and at other times as specified in the - description of a schema node using this type. If such - other times can occur, for example, the creation of - a schema node of type counter64 at times other than - re-initialization, then a corresponding schema node - should be defined, with an appropriate type, to indicate - the last discontinuity. - - The counter64 type should not be used for configuration - schema nodes. A default statement SHOULD NOT be used in - combination with the type counter64. - - In the value set and its semantics, this type is equivalent - to the Counter64 type of the SMIv2."; - reference - "RFC 2578: Structure of Management Information Version 2 - (SMIv2)"; - } - - typedef zero-based-counter64 { - type yang:counter64; - default "0"; - description - "The zero-based-counter64 type represents a counter64 that - has the defined 'initial' value zero. - - A schema node of this type will be set to zero (0) on creation - and will thereafter increase monotonically until it reaches - a maximum value of 2^64-1 (18446744073709551615 decimal), - when it wraps around and starts increasing again from zero. - - Provided that an application discovers a new schema node - of this type within the minimum time to wrap, it can use the - 'initial' value as a delta. It is important for a management - station to be aware of this minimum time and the actual time - between polls, and to discard data if the actual time is too - long or there is no defined minimum time. - - In the value set and its semantics, this type is equivalent - to the ZeroBasedCounter64 textual convention of the SMIv2."; - reference - "RFC 2856: Textual Conventions for Additional High Capacity - Data Types"; - } - - typedef gauge32 { - type uint32; - description - "The gauge32 type represents a non-negative integer, which - may increase or decrease, but shall never exceed a maximum - value, nor fall below a minimum value. The maximum value - cannot be greater than 2^32-1 (4294967295 decimal), and - the minimum value cannot be smaller than 0. The value of - a gauge32 has its maximum value whenever the information - being modeled is greater than or equal to its maximum - value, and has its minimum value whenever the information - being modeled is smaller than or equal to its minimum value. - If the information being modeled subsequently decreases - below (increases above) the maximum (minimum) value, the - gauge32 also decreases (increases). - - In the value set and its semantics, this type is equivalent - to the Gauge32 type of the SMIv2."; - reference - "RFC 2578: Structure of Management Information Version 2 - (SMIv2)"; - } - - typedef gauge64 { - type uint64; - description - "The gauge64 type represents a non-negative integer, which - may increase or decrease, but shall never exceed a maximum - value, nor fall below a minimum value. The maximum value - cannot be greater than 2^64-1 (18446744073709551615), and - the minimum value cannot be smaller than 0. The value of - a gauge64 has its maximum value whenever the information - being modeled is greater than or equal to its maximum - value, and has its minimum value whenever the information - being modeled is smaller than or equal to its minimum value. - If the information being modeled subsequently decreases - below (increases above) the maximum (minimum) value, the - gauge64 also decreases (increases). - - In the value set and its semantics, this type is equivalent - to the CounterBasedGauge64 SMIv2 textual convention defined - in RFC 2856"; - reference - "RFC 2856: Textual Conventions for Additional High Capacity - Data Types"; - } - - /*** collection of identifier-related types ***/ - - typedef object-identifier { - type string { - pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))' - + '(\.(0|([1-9]\d*)))*'; - } - description - "The object-identifier type represents administratively - assigned names in a registration-hierarchical-name tree. - - Values of this type are denoted as a sequence of numerical - non-negative sub-identifier values. Each sub-identifier - value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers - are separated by single dots and without any intermediate - whitespace. - - The ASN.1 standard restricts the value space of the first - sub-identifier to 0, 1, or 2. Furthermore, the value space - of the second sub-identifier is restricted to the range - 0 to 39 if the first sub-identifier is 0 or 1. Finally, - the ASN.1 standard requires that an object identifier - has always at least two sub-identifiers. The pattern - captures these restrictions. - - Although the number of sub-identifiers is not limited, - module designers should realize that there may be - implementations that stick with the SMIv2 limit of 128 - sub-identifiers. - - This type is a superset of the SMIv2 OBJECT IDENTIFIER type - since it is not restricted to 128 sub-identifiers. Hence, - this type SHOULD NOT be used to represent the SMIv2 OBJECT - IDENTIFIER type; the object-identifier-128 type SHOULD be - used instead."; - reference - "ISO9834-1: Information technology -- Open Systems - Interconnection -- Procedures for the operation of OSI - Registration Authorities: General procedures and top - arcs of the ASN.1 Object Identifier tree"; - } - - typedef object-identifier-128 { - type object-identifier { - pattern '\d*(\.\d*){1,127}'; - } - description - "This type represents object-identifiers restricted to 128 - sub-identifiers. - - In the value set and its semantics, this type is equivalent - to the OBJECT IDENTIFIER type of the SMIv2."; - reference - "RFC 2578: Structure of Management Information Version 2 - (SMIv2)"; - } - - typedef yang-identifier { - type string { - length "1..max"; - pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*'; - pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*'; - } - description - "A YANG identifier string as defined by the 'identifier' - rule in Section 12 of RFC 6020. An identifier must - start with an alphabetic character or an underscore - followed by an arbitrary sequence of alphabetic or - numeric characters, underscores, hyphens, or dots. - - A YANG identifier MUST NOT start with any possible - combination of the lowercase or uppercase character - sequence 'xml'."; - reference - "RFC 6020: YANG - A Data Modeling Language for the Network - Configuration Protocol (NETCONF)"; - } - - /*** collection of types related to date and time***/ - - typedef date-and-time { - type string { - pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?' - + '(Z|[\+\-]\d{2}:\d{2})'; - } - description - "The date-and-time type is a profile of the ISO 8601 - standard for representation of dates and times using the - Gregorian calendar. The profile is defined by the - date-time production in Section 5.6 of RFC 3339. - - The date-and-time type is compatible with the dateTime XML - schema type with the following notable exceptions: - - (a) The date-and-time type does not allow negative years. - - (b) The date-and-time time-offset -00:00 indicates an unknown - time zone (see RFC 3339) while -00:00 and +00:00 and Z - all represent the same time zone in dateTime. - - (c) The canonical format (see below) of data-and-time values - differs from the canonical format used by the dateTime XML - schema type, which requires all times to be in UTC using - the time-offset 'Z'. - - This type is not equivalent to the DateAndTime textual - convention of the SMIv2 since RFC 3339 uses a different - separator between full-date and full-time and provides - higher resolution of time-secfrac. - - The canonical format for date-and-time values with a known time - zone uses a numeric time zone offset that is calculated using - the device's configured known offset to UTC time. A change of - the device's offset to UTC time will cause date-and-time values - to change accordingly. Such changes might happen periodically - in case a server follows automatically daylight saving time - (DST) time zone offset changes. The canonical format for - date-and-time values with an unknown time zone (usually - referring to the notion of local time) uses the time-offset - -00:00."; - reference - "RFC 3339: Date and Time on the Internet: Timestamps - RFC 2579: Textual Conventions for SMIv2 - XSD-TYPES: XML Schema Part 2: Datatypes Second Edition"; - } - - typedef timeticks { - type uint32; - description - "The timeticks type represents a non-negative integer that - represents the time, modulo 2^32 (4294967296 decimal), in - hundredths of a second between two epochs. When a schema - node is defined that uses this type, the description of - the schema node identifies both of the reference epochs. - - In the value set and its semantics, this type is equivalent - to the TimeTicks type of the SMIv2."; - reference - "RFC 2578: Structure of Management Information Version 2 - (SMIv2)"; - } - - typedef timestamp { - type yang:timeticks; - description - "The timestamp type represents the value of an associated - timeticks schema node at which a specific occurrence - happened. The specific occurrence must be defined in the - description of any schema node defined using this type. When - the specific occurrence occurred prior to the last time the - associated timeticks attribute was zero, then the timestamp - value is zero. Note that this requires all timestamp values - to be reset to zero when the value of the associated timeticks - attribute reaches 497+ days and wraps around to zero. - - The associated timeticks schema node must be specified - in the description of any schema node using this type. - - In the value set and its semantics, this type is equivalent - to the TimeStamp textual convention of the SMIv2."; - reference - "RFC 2579: Textual Conventions for SMIv2"; - } - - /*** collection of generic address types ***/ - - typedef phys-address { - type string { - pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?'; - } - - description - "Represents media- or physical-level addresses represented - as a sequence octets, each octet represented by two hexadecimal - numbers. Octets are separated by colons. The canonical - representation uses lowercase characters. - - In the value set and its semantics, this type is equivalent - to the PhysAddress textual convention of the SMIv2."; - reference - "RFC 2579: Textual Conventions for SMIv2"; - } - - typedef mac-address { - type string { - pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}'; - } - description - "The mac-address type represents an IEEE 802 MAC address. - The canonical representation uses lowercase characters. - - In the value set and its semantics, this type is equivalent - to the MacAddress textual convention of the SMIv2."; - reference - "IEEE 802: IEEE Standard for Local and Metropolitan Area - Networks: Overview and Architecture - RFC 2579: Textual Conventions for SMIv2"; - } - - /*** collection of XML-specific types ***/ - - typedef xpath1.0 { - type string; - description - "This type represents an XPATH 1.0 expression. - - When a schema node is defined that uses this type, the - description of the schema node MUST specify the XPath - context in which the XPath expression is evaluated."; - reference - "XPATH: XML Path Language (XPath) Version 1.0"; - } - - /*** collection of string types ***/ - - typedef hex-string { - type string { - pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?'; - } - description - "A hexadecimal string with octets represented as hex digits - separated by colons. The canonical representation uses - lowercase characters."; - } - - typedef uuid { - type string { - pattern '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-' - + '[0-9a-fA-F]{4}-[0-9a-fA-F]{12}'; - } - description - "A Universally Unique IDentifier in the string representation - defined in RFC 4122. The canonical representation uses - lowercase characters. - - The following is an example of a UUID in string representation: - f81d4fae-7dec-11d0-a765-00a0c91e6bf6 - "; - reference - "RFC 4122: A Universally Unique IDentifier (UUID) URN - Namespace"; - } - - typedef dotted-quad { - type string { - pattern - '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}' - + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'; - } - description - "An unsigned 32-bit number expressed in the dotted-quad - notation, i.e., four octets written as decimal numbers - and separated with the '.' (full stop) character."; - } -} |