diff options
Diffstat (limited to 'utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang')
| -rw-r--r-- | utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang b/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang new file mode 100644 index 000000000..ee58fa3ab --- /dev/null +++ b/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang @@ -0,0 +1,474 @@ +module ietf-yang-types { + + namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types"; + prefix "yang"; + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: <http://tools.ietf.org/wg/netmod/> + WG List: <mailto:netmod@ietf.org> + + WG Chair: David Kessens + <mailto:david.kessens@nsn.com> + + WG Chair: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de> + + Editor: Juergen Schoenwaelder + <mailto:j.schoenwaelder@jacobs-university.de>"; + + description + "This module contains a collection of generally useful derived + YANG data types. + + Copyright (c) 2013 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 6991; see + the RFC itself for full legal notices."; + + revision 2013-07-15 { + description + "This revision adds the following new data types: + - yang-identifier + - hex-string + - uuid + - dotted-quad"; + reference + "RFC 6991: Common YANG Data Types"; + } + + revision 2010-09-24 { + description + "Initial revision."; + reference + "RFC 6021: Common YANG Data Types"; + } + + /*** collection of counter and gauge types ***/ + + typedef counter32 { + type uint32; + description + "The counter32 type represents a non-negative integer + that monotonically increases until it reaches a + maximum value of 2^32-1 (4294967295 decimal), when it + wraps around and starts increasing again from zero. + + Counters have no defined 'initial' value, and thus, a + single value of a counter has (in general) no information + content. Discontinuities in the monotonically increasing + value normally occur at re-initialization of the + management system, and at other times as specified in the + description of a schema node using this type. If such + other times can occur, for example, the creation of + a schema node of type counter32 at times other than + re-initialization, then a corresponding schema node + should be defined, with an appropriate type, to indicate + the last discontinuity. + + The counter32 type should not be used for configuration + schema nodes. A default statement SHOULD NOT be used in + combination with the type counter32. + + In the value set and its semantics, this type is equivalent + to the Counter32 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 + (SMIv2)"; + } + + typedef zero-based-counter32 { + type yang:counter32; + default "0"; + description + "The zero-based-counter32 type represents a counter32 + that has the defined 'initial' value zero. + + A schema node of this type will be set to zero (0) on creation + and will thereafter increase monotonically until it reaches + a maximum value of 2^32-1 (4294967295 decimal), when it + wraps around and starts increasing again from zero. + + Provided that an application discovers a new schema node + of this type within the minimum time to wrap, it can use the + 'initial' value as a delta. It is important for a management + station to be aware of this minimum time and the actual time + between polls, and to discard data if the actual time is too + long or there is no defined minimum time. + + In the value set and its semantics, this type is equivalent + to the ZeroBasedCounter32 textual convention of the SMIv2."; + reference + "RFC 4502: Remote Network Monitoring Management Information + Base Version 2"; + } + + typedef counter64 { + type uint64; + description + "The counter64 type represents a non-negative integer + that monotonically increases until it reaches a + maximum value of 2^64-1 (18446744073709551615 decimal), + when it wraps around and starts increasing again from zero. + + Counters have no defined 'initial' value, and thus, a + single value of a counter has (in general) no information + content. Discontinuities in the monotonically increasing + value normally occur at re-initialization of the + management system, and at other times as specified in the + description of a schema node using this type. If such + other times can occur, for example, the creation of + a schema node of type counter64 at times other than + re-initialization, then a corresponding schema node + should be defined, with an appropriate type, to indicate + the last discontinuity. + + The counter64 type should not be used for configuration + schema nodes. A default statement SHOULD NOT be used in + combination with the type counter64. + + In the value set and its semantics, this type is equivalent + to the Counter64 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 + (SMIv2)"; + } + + typedef zero-based-counter64 { + type yang:counter64; + default "0"; + description + "The zero-based-counter64 type represents a counter64 that + has the defined 'initial' value zero. + + A schema node of this type will be set to zero (0) on creation + and will thereafter increase monotonically until it reaches + a maximum value of 2^64-1 (18446744073709551615 decimal), + when it wraps around and starts increasing again from zero. + + Provided that an application discovers a new schema node + of this type within the minimum time to wrap, it can use the + 'initial' value as a delta. It is important for a management + station to be aware of this minimum time and the actual time + between polls, and to discard data if the actual time is too + long or there is no defined minimum time. + + In the value set and its semantics, this type is equivalent + to the ZeroBasedCounter64 textual convention of the SMIv2."; + reference + "RFC 2856: Textual Conventions for Additional High Capacity + Data Types"; + } + + typedef gauge32 { + type uint32; + description + "The gauge32 type represents a non-negative integer, which + may increase or decrease, but shall never exceed a maximum + value, nor fall below a minimum value. The maximum value + cannot be greater than 2^32-1 (4294967295 decimal), and + the minimum value cannot be smaller than 0. The value of + a gauge32 has its maximum value whenever the information + being modeled is greater than or equal to its maximum + value, and has its minimum value whenever the information + being modeled is smaller than or equal to its minimum value. + If the information being modeled subsequently decreases + below (increases above) the maximum (minimum) value, the + gauge32 also decreases (increases). + + In the value set and its semantics, this type is equivalent + to the Gauge32 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 + (SMIv2)"; + } + + typedef gauge64 { + type uint64; + description + "The gauge64 type represents a non-negative integer, which + may increase or decrease, but shall never exceed a maximum + value, nor fall below a minimum value. The maximum value + cannot be greater than 2^64-1 (18446744073709551615), and + the minimum value cannot be smaller than 0. The value of + a gauge64 has its maximum value whenever the information + being modeled is greater than or equal to its maximum + value, and has its minimum value whenever the information + being modeled is smaller than or equal to its minimum value. + If the information being modeled subsequently decreases + below (increases above) the maximum (minimum) value, the + gauge64 also decreases (increases). + + In the value set and its semantics, this type is equivalent + to the CounterBasedGauge64 SMIv2 textual convention defined + in RFC 2856"; + reference + "RFC 2856: Textual Conventions for Additional High Capacity + Data Types"; + } + + /*** collection of identifier-related types ***/ + + typedef object-identifier { + type string { + pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))' + + '(\.(0|([1-9]\d*)))*'; + } + description + "The object-identifier type represents administratively + assigned names in a registration-hierarchical-name tree. + + Values of this type are denoted as a sequence of numerical + non-negative sub-identifier values. Each sub-identifier + value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers + are separated by single dots and without any intermediate + whitespace. + + The ASN.1 standard restricts the value space of the first + sub-identifier to 0, 1, or 2. Furthermore, the value space + of the second sub-identifier is restricted to the range + 0 to 39 if the first sub-identifier is 0 or 1. Finally, + the ASN.1 standard requires that an object identifier + has always at least two sub-identifiers. The pattern + captures these restrictions. + + Although the number of sub-identifiers is not limited, + module designers should realize that there may be + implementations that stick with the SMIv2 limit of 128 + sub-identifiers. + + This type is a superset of the SMIv2 OBJECT IDENTIFIER type + since it is not restricted to 128 sub-identifiers. Hence, + this type SHOULD NOT be used to represent the SMIv2 OBJECT + IDENTIFIER type; the object-identifier-128 type SHOULD be + used instead."; + reference + "ISO9834-1: Information technology -- Open Systems + Interconnection -- Procedures for the operation of OSI + Registration Authorities: General procedures and top + arcs of the ASN.1 Object Identifier tree"; + } + + typedef object-identifier-128 { + type object-identifier { + pattern '\d*(\.\d*){1,127}'; + } + description + "This type represents object-identifiers restricted to 128 + sub-identifiers. + + In the value set and its semantics, this type is equivalent + to the OBJECT IDENTIFIER type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 + (SMIv2)"; + } + + typedef yang-identifier { + type string { + length "1..max"; + pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*'; + pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*'; + } + description + "A YANG identifier string as defined by the 'identifier' + rule in Section 12 of RFC 6020. An identifier must + start with an alphabetic character or an underscore + followed by an arbitrary sequence of alphabetic or + numeric characters, underscores, hyphens, or dots. + + A YANG identifier MUST NOT start with any possible + combination of the lowercase or uppercase character + sequence 'xml'."; + reference + "RFC 6020: YANG - A Data Modeling Language for the Network + Configuration Protocol (NETCONF)"; + } + + /*** collection of types related to date and time***/ + + typedef date-and-time { + type string { + pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?' + + '(Z|[\+\-]\d{2}:\d{2})'; + } + description + "The date-and-time type is a profile of the ISO 8601 + standard for representation of dates and times using the + Gregorian calendar. The profile is defined by the + date-time production in Section 5.6 of RFC 3339. + + The date-and-time type is compatible with the dateTime XML + schema type with the following notable exceptions: + + (a) The date-and-time type does not allow negative years. + + (b) The date-and-time time-offset -00:00 indicates an unknown + time zone (see RFC 3339) while -00:00 and +00:00 and Z + all represent the same time zone in dateTime. + + (c) The canonical format (see below) of data-and-time values + differs from the canonical format used by the dateTime XML + schema type, which requires all times to be in UTC using + the time-offset 'Z'. + + This type is not equivalent to the DateAndTime textual + convention of the SMIv2 since RFC 3339 uses a different + separator between full-date and full-time and provides + higher resolution of time-secfrac. + + The canonical format for date-and-time values with a known time + zone uses a numeric time zone offset that is calculated using + the device's configured known offset to UTC time. A change of + the device's offset to UTC time will cause date-and-time values + to change accordingly. Such changes might happen periodically + in case a server follows automatically daylight saving time + (DST) time zone offset changes. The canonical format for + date-and-time values with an unknown time zone (usually + referring to the notion of local time) uses the time-offset + -00:00."; + reference + "RFC 3339: Date and Time on the Internet: Timestamps + RFC 2579: Textual Conventions for SMIv2 + XSD-TYPES: XML Schema Part 2: Datatypes Second Edition"; + } + + typedef timeticks { + type uint32; + description + "The timeticks type represents a non-negative integer that + represents the time, modulo 2^32 (4294967296 decimal), in + hundredths of a second between two epochs. When a schema + node is defined that uses this type, the description of + the schema node identifies both of the reference epochs. + + In the value set and its semantics, this type is equivalent + to the TimeTicks type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 + (SMIv2)"; + } + + typedef timestamp { + type yang:timeticks; + description + "The timestamp type represents the value of an associated + timeticks schema node at which a specific occurrence + happened. The specific occurrence must be defined in the + description of any schema node defined using this type. When + the specific occurrence occurred prior to the last time the + associated timeticks attribute was zero, then the timestamp + value is zero. Note that this requires all timestamp values + to be reset to zero when the value of the associated timeticks + attribute reaches 497+ days and wraps around to zero. + + The associated timeticks schema node must be specified + in the description of any schema node using this type. + + In the value set and its semantics, this type is equivalent + to the TimeStamp textual convention of the SMIv2."; + reference + "RFC 2579: Textual Conventions for SMIv2"; + } + + /*** collection of generic address types ***/ + + typedef phys-address { + type string { + pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?'; + } + + description + "Represents media- or physical-level addresses represented + as a sequence octets, each octet represented by two hexadecimal + numbers. Octets are separated by colons. The canonical + representation uses lowercase characters. + + In the value set and its semantics, this type is equivalent + to the PhysAddress textual convention of the SMIv2."; + reference + "RFC 2579: Textual Conventions for SMIv2"; + } + + typedef mac-address { + type string { + pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}'; + } + description + "The mac-address type represents an IEEE 802 MAC address. + The canonical representation uses lowercase characters. + + In the value set and its semantics, this type is equivalent + to the MacAddress textual convention of the SMIv2."; + reference + "IEEE 802: IEEE Standard for Local and Metropolitan Area + Networks: Overview and Architecture + RFC 2579: Textual Conventions for SMIv2"; + } + + /*** collection of XML-specific types ***/ + + typedef xpath1.0 { + type string; + description + "This type represents an XPATH 1.0 expression. + + When a schema node is defined that uses this type, the + description of the schema node MUST specify the XPath + context in which the XPath expression is evaluated."; + reference + "XPATH: XML Path Language (XPath) Version 1.0"; + } + + /*** collection of string types ***/ + + typedef hex-string { + type string { + pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?'; + } + description + "A hexadecimal string with octets represented as hex digits + separated by colons. The canonical representation uses + lowercase characters."; + } + + typedef uuid { + type string { + pattern '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-' + + '[0-9a-fA-F]{4}-[0-9a-fA-F]{12}'; + } + description + "A Universally Unique IDentifier in the string representation + defined in RFC 4122. The canonical representation uses + lowercase characters. + + The following is an example of a UUID in string representation: + f81d4fae-7dec-11d0-a765-00a0c91e6bf6 + "; + reference + "RFC 4122: A Universally Unique IDentifier (UUID) URN + Namespace"; + } + + typedef dotted-quad { + type string { + pattern + '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}' + + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'; + } + description + "An unsigned 32-bit number expressed in the dotted-quad + notation, i.e., four octets written as decimal numbers + and separated with the '.' (full stop) character."; + } +} |