rename vpp-dpdk-dev to vpp-ext-deps

We need to have new tenants in the development package.
This is first of series of patches which will allow us to have multiple
external libs and tools packaged for developer's convenience.

Change-Id: I884bd75fba96005bbf8cea92774682b2228e0e22
Signed-off-by: Damjan Marion <damarion@cisco.com>

1 files changed, 488 insertions, 0 deletions

diff --git a/build/external/Makefile b/build/external/Makefile
new file mode 100644
index 00000000000..201cf122fda
--- /dev/null
+++ b/build/external/Makefile
@@ -0,0 +1,488 @@
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Scripts require non-POSIX parts of bash
+SHELL := /bin/bash
+
+DPDK_BUILD_DIR        ?= $(CURDIR)/_build
+DPDK_INSTALL_DIR      ?= $(CURDIR)/_install
+DPDK_PKTMBUF_HEADROOM ?= 128
+DPDK_CACHE_LINE_SIZE  ?= 64
+DPDK_DOWNLOAD_DIR     ?= $(HOME)/Downloads
+DPDK_DEBUG            ?= n
+DPDK_MLX4_PMD         ?= n
+DPDK_MLX5_PMD         ?= n
+DPDK_TAP_PMD          ?= n
+DPDK_FAILSAFE_PMD     ?= n
+
+B := $(DPDK_BUILD_DIR)
+I := $(DPDK_INSTALL_DIR)
+DPDK_VERSION ?= 18.08
+PKG_VERSION ?= $(shell git describe --abbrev=0 | cut -d- -f1 | cut -dv -f2)
+PKG_SUFFIX ?= $(shell git log --oneline $$(git describe --abbrev=0).. . | wc -l)
+DPDK_BASE_URL ?= http://fast.dpdk.org/rel
+DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz
+DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL)
+DPDK_18.05_TARBALL_MD5_CKSUM := 9fc86367cd9407ff6a8dfea56c4eddc4
+DPDK_18.08_TARBALL_MD5_CKSUM := da5e7fb25ab063c47e53929fb8c58be5
+MACHINE=$(shell uname -m)
+
+# replace dot with space, and if 3rd word exists we deal with stable dpdk rel
+ifeq ($(word 3,$(subst ., ,$(DPDK_VERSION))),)
+DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION)
+else
+DPDK_SOURCE := $(B)/dpdk-stable-$(DPDK_VERSION)
+endif
+
+NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds
+NASM_VER := 2.13.03
+NASM_TARBALL := nasm-$(NASM_VER).tar.xz
+NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL)
+NASM_SOURCE := $(B)/nasm-$(NASM_VER)
+
+ifneq (,$(findstring 18.02,$(DPDK_VERSION)))
+IPSEC_MB_VER ?= 0.48
+else
+IPSEC_MB_VER ?= 0.49
+endif
+
+ifeq ($(MACHINE),$(filter $(MACHINE),x86_64))
+  AESNI ?= y
+$(info Building IPSec-MB $(IPSEC_MB_VER) library)
+else
+  AESNI ?= N
+endif
+
+AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz
+AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL)
+AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
+
+ifneq (,$(findstring clang,$(CC)))
+DPDK_CC=clang
+else ifneq (,$(findstring icc,$(CC)))
+DPDK_CC=icc
+else
+DPDK_CC=gcc
+endif
+
+##############################################################################
+# Intel x86
+##############################################################################
+ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686))
+DPDK_TARGET           ?= $(MACHINE)-native-linuxapp-$(DPDK_CC)
+DPDK_MACHINE          ?= nhm
+DPDK_TUNE             ?= core-avx2
+
+##############################################################################
+# ARM64
+##############################################################################
+else ifeq ($(MACHINE),aarch64)
+CROSS :=
+export CROSS
+DPDK_TARGET           ?= arm64-armv8a-linuxapp-$(DPDK_CC)
+DPDK_MACHINE          ?= armv8a
+DPDK_TUNE             ?= generic
+
+CPU_IMP_ARM                     = 0x41
+CPU_IMP_CAVIUM                  = 0x43
+
+CPU_PART_ARM_CORTEX_A53         = 0xd03
+CPU_PART_ARM_CORTEX_A57         = 0xd07
+CPU_PART_ARM_CORTEX_A72         = 0xd08
+CPU_PART_ARM_CORTEX_A73         = 0xd09
+
+CPU_PART_CAVIUM_THUNDERX        = 0x0a1
+CPU_PART_CAVIUM_THUNDERX_81XX   = 0x0a2
+CPU_PART_CAVIUM_THUNDERX_83XX   = 0x0a3
+
+MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo)
+MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo)
+
+ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM))
+##############################################################################
+# Arm Cortex
+##############################################################################
+CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \
+		     $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \
+		     $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \
+		     $(CPU_PART_ARM_CORTEX_A73)/cortex-a73
+CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE)))
+ifneq ($(CPU_TUNE),)
+DPDK_TUNE             = $(CPU_TUNE)
+else
+$(warning Unknown Arm CPU)
+endif
+
+else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM))
+##############################################################################
+# Cavium ThunderX
+##############################################################################
+ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \
+	$(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX)))
+DPDK_TARGET           = arm64-thunderx-linuxapp-$(DPDK_CC)
+DPDK_MACHINE          = thunderx
+DPDK_CACHE_LINE_SIZE := 128
+else
+$(warning Unknown Cavium CPU)
+endif
+endif
+
+##############################################################################
+# Unknown platform
+##############################################################################
+else
+$(error Unknown platform)
+endif
+
+# /proc/cpuinfo does not exist on platforms without a /proc and on some
+# platforms, notably inside containers, it has no content. In those cases
+# we assume there's 1 processor; we use 2*ncpu for the -j option.
+# NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
+# for file presence and content; for now this will have to do.
+JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
+	$(shell grep -c ^processor /proc/cpuinfo), 2)
+
+# compiler/linker custom arguments
+ifeq ($(DPDK_CC),clang)
+DPDK_CPU_CFLAGS := -fPIE -fPIC
+else
+DPDK_CPU_CFLAGS := -pie -fPIC
+endif
+
+ifeq ($(DPDK_DEBUG),n)
+DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE)
+else
+DPDK_EXTRA_CFLAGS := -g -O0
+endif
+
+# -Wimplicit-fallthrough was introduced starting from GCC 7,
+# and it requires newer version of ccache.
+# Disable fallthrough warning for old ccache version.
+ifeq ($(DPDK_CC),gcc)
+GCC_VER_V = "7.0.0"
+CCACHE_VER_V = "3.4.1"
+GCC_VER = $(shell gcc --version | grep ^gcc | sed 's/^.* //g')
+CCACHE_VER = $(shell ccache --version | grep ^ccache | sed 's/^.* //g')
+ifeq ($(shell expr "$(GCC_VER)" ">=" "$(GCC_VER_V)"),1)
+ifeq ($(shell expr "$(CCACHE_VER)" "<" "$(CCACHE_VER_V)"),1)
+DPDK_EXTRA_CFLAGS += -Wimplicit-fallthrough=0
+endif
+endif
+endif
+
+ifeq ($(AESNI),y)
+IPSEC_MB_BUILD_PATH := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER)
+DPDK_EXTRA_CFLAGS += -L$(IPSEC_MB_BUILD_PATH) -I$(IPSEC_MB_BUILD_PATH)
+endif
+
+DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE)
+
+# assemble DPDK make arguments
+DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \
+	T=$(DPDK_TARGET) \
+	RTE_CONFIG_TEMPLATE=../custom-config \
+	EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \
+	EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \
+	CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \
+	DESTDIR=$(I) \
+        $(DPDK_MAKE_EXTRA_ARGS)
+
+define set
+@if grep -q CONFIG_$1 $@ ; \
+	then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \
+	else echo CONFIG_$1=$2 >> $@ ; \
+fi
+endef
+
+all: build
+
+$(B)/custom-config: $(B)/.patch.ok Makefile
+	@echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) ---
+	@cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@
+	$(call set,RTE_MACHINE,$(DPDK_MACHINE))
+	@# modify options
+	$(call set,RTE_MAX_LCORE,256)
+	$(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM))
+	$(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE))
+	$(call set,RTE_LIBEAL_USE_HPET,y)
+	$(call set,RTE_BUILD_COMBINE_LIBS,y)
+	$(call set,RTE_PCI_CONFIG,y)
+	$(call set,RTE_PCI_EXTENDED_TAG,"on")
+	$(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096)
+	@# enable debug init for device drivers
+	$(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG))
+	$(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG))
+	$(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG))
+	$(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG))
+	$(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG))
+	$(call set,RTE_LIBRTE_PMD_BOND,y)
+	$(call set,RTE_LIBRTE_IP_FRAG,y)
+	$(call set,RTE_LIBRTE_PMD_QAT,y)
+	$(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI))
+	$(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI))
+	$(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD))
+	$(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD))
+	$(call set,RTE_LIBRTE_PMD_SOFTNIC,n)
+	$(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD))
+	$(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD))
+	$(call set,RTE_LIBRTE_PMD_TAP,$(DPDK_TAP_PMD))
+	$(call set,RTE_LIBRTE_PMD_FAILSAFE,$(DPDK_FAILSAFE_PMD))
+	@# not needed
+	$(call set,RTE_LIBRTE_CFGFILE,n)
+	$(call set,RTE_LIBRTE_LPM,n)
+	$(call set,RTE_LIBRTE_ACL,n)
+	$(call set,RTE_LIBRTE_POWER,n)
+	$(call set,RTE_LIBRTE_DISTRIBUTOR,n)
+	$(call set,RTE_LIBRTE_PORT,n)
+	$(call set,RTE_LIBRTE_TABLE,n)
+	$(call set,RTE_LIBRTE_PIPELINE,n)
+	$(call set,RTE_LIBRTE_FLOW_CLASSIFY,n)
+	$(call set,RTE_KNI_KMOD,n)
+	$(call set,RTE_EAL_IGB_UIO,n)
+	@# currently broken in 18.02
+	$(call set,RTE_LIBRTE_DPAA_BUS,n)
+	$(call set,RTE_LIBRTE_DPAA_MEMPOOL,n)
+	$(call set,RTE_LIBRTE_DPAA_PMD,n)
+	$(call set,RTE_LIBRTE_PMD_DPAA_SEC,n)
+	$(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n)
+	@rm -f .config.ok
+
+$(CURDIR)/$(DPDK_TARBALL):
+	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \
+		then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \
+		else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \
+	fi
+	@rm -f $(B)/.download.ok
+
+$(CURDIR)/$(NASM_TARBALL):
+	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \
+		then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \
+		else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \
+	fi
+
+$(CURDIR)/$(AESNIMB_LIB_TARBALL):
+	@if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \
+		then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \
+		else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \
+	fi
+
+DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL)
+ifeq ($(AESNI),y)
+DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL)
+DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL)
+endif
+
+$(B)/.download.ok: $(DPDK_DOWNLOADS)
+	@mkdir -p $(B)
+	@openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum
+	@([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \
+	( echo "Bad Checksum! Please remove $< and retry" && \
+		rm $(B)/$(DPDK_TARBALL).md5sum && false ))
+	@touch $@
+
+.PHONY: download
+download: $(B)/.download.ok
+
+$(B)/.extract.ok: $(B)/.download.ok
+	@echo --- extracting $(DPDK_TARBALL) ---
+	@tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL)
+ifeq ($(AESNI),y)
+	@echo --- extracting $(NASM_TARBALL) ---
+	@tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL)
+	@echo --- extracting $(AESNIMB_LIB_TARBALL) ---
+	@tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL)
+endif
+	@touch $@
+
+.PHONY: extract
+extract: $(B)/.extract.ok
+
+$(B)/.patch.ok: $(B)/.extract.ok
+ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),)
+	@echo --- patching ---
+	@for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \
+		echo Applying patch: $$(basename $$f) ; \
+		patch -p1 -d $(DPDK_SOURCE) < $$f ; \
+	done
+endif
+	@touch $@
+
+.PHONY: patch
+patch: $(B)/.patch.ok
+
+$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config
+	@make $(DPDK_MAKE_ARGS) config
+	@touch $@
+
+.PHONY: config
+config: $(B)/.config.ok
+
+.PHONY: build-nasm
+build-nasm:
+	cd $(NASM_SOURCE) && sh configure && make -j
+
+.PHONY: build-ipsec-mb
+build-ipsec-mb:
+	mkdir -p $(I)/lib/
+	# Do not build GCM stuff if we are building ISA_L
+	make -C $(AESNIMB_LIB_SOURCE) -j SHARED=n \
+	  EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm
+	cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/
+
+.PHONY: build-dpdk
+build-dpdk:
+	@if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi
+	@make $(DPDK_MAKE_ARGS) install
+
+# Order matters
+ifeq ($(AESNI),y)
+BUILD_TARGETS += build-nasm
+BUILD_TARGETS += build-ipsec-mb
+endif
+BUILD_TARGETS += build-dpdk
+
+$(B)/.build.ok: $(BUILD_TARGETS)
+	@touch $@
+
+.PHONY: build
+build: $(B)/.build.ok
+
+.PHONY: install
+install: $(B)/.build.ok
+
+.PHONY: clean
+clean:
+	@rm -rf $(B) $(I)
+
+##############################################################################
+# .deb packaging
+##############################################################################
+
+DEB_VER := $(PKG_VERSION)
+DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null)
+DEV_DEB=vpp-ext-deps_$(DEB_VER)-$(PKG_SUFFIX)_$(DEB_ARCH).deb
+INSTALLED_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-ext-deps 2> /dev/null)
+
+.PHONY: build-deb install-deb check-deb
+
+deb/debian/changelog: Makefile
+	@echo "vpp-ext-deps ($(DEB_VER)-$(PKG_SUFFIX)) unstable; urgency=low" > $@
+	@echo "" >> $@
+	@echo "  * Version $(DEB_VER)" >> $@
+	@echo "" >> $@
+	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@
+
+$(DEV_DEB): deb/debian/changelog
+	@cd deb && dpkg-buildpackage -b -uc -us
+	git clean -fdx deb
+
+build-deb: $(DEV_DEB)
+
+install-deb:
+ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
+	@echo "=========================================================="
+	@echo " Out of date vpp-ext-deps package installed."
+	@echo " Installed: $(INSTALLED_VER)"
+	@echo " Needed: $(DEB_VER)-$(PKG_SUFFIX)"
+	@echo "=========================================================="
+	@make $(DEV_DEB)
+	@sudo dpkg -i $(DEV_DEB)
+else
+	@echo "=========================================================="
+	@echo " Up-to-date vpp-ext-deps package already installed"
+	@echo "=========================================================="
+endif
+
+check-deb:
+ifneq ($(INSTALLED_VER),$(DEB_VER)-$(PKG_SUFFIX))
+	@echo "=========================================================="
+	@echo " Outdated DPDK package detected:"
+	@echo "  Installed: vpp-ext-deps $(INSTALLED_VER)"
+	@echo "  Current:   vpp-ext-deps $(DEB_VER)-$(PKG_SUFFIX)"
+	@echo ""
+	@echo " Please upgrade by invoking 'make install-ext-deps'"
+	@echo " from the top level directory."
+	@echo "=========================================================="
+endif
+
+##############################################################################
+# .rpm packaging
+##############################################################################
+
+RPM_VER := $(PKG_VERSION)
+RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null)
+DEV_RPM=vpp-ext-deps-$(RPM_VER)-$(PKG_SUFFIX).$(RPM_ARCH).rpm
+INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-ext-deps 2> /dev/null | grep -v "not inst")
+
+.PHONY: build-rpm install-rpm check-rpm
+
+$(DEV_RPM): Makefile rpm/vpp-ext-deps.spec
+	@rpmbuild -bb \
+	  --define "_topdir $(CURDIR)/rpm" \
+	  --define "_version $(RPM_VER)" \
+	  --define "_release $(PKG_SUFFIX)" \
+	  $(CURDIR)/rpm/vpp-ext-deps.spec
+	mv rpm/RPMS/$(RPM_ARCH)/*.rpm .
+	git clean -fdx rpm
+
+build-rpm: $(DEV_RPM)
+
+install-rpm:
+ifneq ($(INSTALLED_RPM_VER),$(PRM_VER)-$(PKG_SUFFIX))
+	@$(MAKE) $(DEV_RPM)
+	sudo rpm -Uih $(DEV_RPM)
+else
+	@echo "=========================================================="
+	@echo " Up-to-date DPDK package already installed"
+	@echo "=========================================================="
+endif
+
+check-rpm:
+ifneq ($(INSTALLED_RPM_VER),$(RPM_VER)-$(PKG_SUFFIX))
+	@echo "=========================================================="
+	@echo " Outdated DPDK package detected:"
+	@echo "  Installed: vpp-ext-deps $(INSTALLED_RPM_VER)"
+	@echo "  Current:   vpp-ext-deps $(RPM_VER)-$(PKG_SUFFIX)"
+	@echo ""
+	@echo " Please upgrade by invoking 'make install-ext-deps'"
+	@echo " from the top level directory."
+	@echo "=========================================================="
+endif
+
+##############################################################################
+# ebuild support
+##############################################################################
+
+.PHONY: ebuild-build ebuild-install
+
+ebuild-build:
+ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
+	@echo "=========================================================="
+	@echo "Building DPDK from source. Consider installing development"
+	@echo "package by invoking 'make install-ext-deps' from the"
+	@echo "top level directory"
+	@echo "=========================================================="
+	make config
+else
+ifneq ($(INSTALLED_VER),)
+	make check-deb
+endif
+ifneq ($(INSTALLED_RPM_VER),)
+	make check-rpm
+endif
+endif
+
+ebuild-install:
+ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
+	make install
+endif