aboutsummaryrefslogtreecommitdiffstats
path: root/src
diff options
context:
space:
mode:
authorJohn Lo <loj@cisco.com>2017-04-07 23:32:32 -0400
committerJohn Lo <loj@cisco.com>2017-04-07 23:32:32 -0400
commit250b95b71babdfb558554c788a82cf45ccc34ab8 (patch)
tree78a3365b1cb80ab3f8b25d5e7010d74c58e5821a /src
parentd927834a1f4dfd18eb4d0788e69f106fc3780ef8 (diff)
Fix init of ENIC driver to allow receiving of jumbo packets
Set rxmode.enable_scatter field in DPDK port config parameter so ENIC driver will use multiple mbuf's for receiving jumbo packets. Also remove ENIC driver check to disable setting ENIC MTU as this capability is now working with the new ENIC driver, subject to 9002B limit. Change-Id: I563976201c4968d4538c0759505cef2de876934a Signed-off-by: John Lo <loj@cisco.com>
Diffstat (limited to 'src')
-rwxr-xr-xsrc/plugins/dpdk/device/init.c76
1 files changed, 27 insertions, 49 deletions
diff --git a/src/plugins/dpdk/device/init.c b/src/plugins/dpdk/device/init.c
index 7eaf8da7992..39d919e2174 100755
--- a/src/plugins/dpdk/device/init.c
+++ b/src/plugins/dpdk/device/init.c
@@ -419,56 +419,35 @@ dpdk_flag_change (vnet_main_t * vnm, vnet_hw_interface_t * hi, u32 flags)
}
else if (ETHERNET_INTERFACE_FLAG_CONFIG_MTU (flags))
{
- /*
- * DAW-FIXME: The Cisco VIC firmware does not provide an api for a
- * driver to dynamically change the mtu. If/when the
- * VIC firmware gets fixed, then this should be removed.
- */
- if (xd->pmd == VNET_DPDK_PMD_ENIC)
- {
- struct rte_eth_dev_info dev_info;
+ int rv;
- /*
- * Restore mtu to what has been set by CIMC in the firmware cfg.
- */
- rte_eth_dev_info_get (xd->device_index, &dev_info);
- hi->max_packet_bytes = dev_info.max_rx_pktlen;
+ xd->port_conf.rxmode.max_rx_pkt_len = hi->max_packet_bytes;
- vlib_cli_output (vlib_get_main (),
- "Cisco VIC mtu can only be changed "
- "using CIMC then rebooting the server!");
- }
- else
- {
- int rv;
+ if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
+ rte_eth_dev_stop (xd->device_index);
- xd->port_conf.rxmode.max_rx_pkt_len = hi->max_packet_bytes;
+ rv = rte_eth_dev_configure
+ (xd->device_index, xd->rx_q_used, xd->tx_q_used, &xd->port_conf);
- if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
- rte_eth_dev_stop (xd->device_index);
+ if (rv < 0)
+ vlib_cli_output (vlib_get_main (),
+ "rte_eth_dev_configure[%d]: err %d",
+ xd->device_index, rv);
- rv = rte_eth_dev_configure
- (xd->device_index, xd->rx_q_used, xd->tx_q_used, &xd->port_conf);
+ rte_eth_dev_set_mtu (xd->device_index, hi->max_packet_bytes);
+ if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
+ {
+ int rv = rte_eth_dev_start (xd->device_index);
+ if (!rv && xd->default_mac_address)
+ rv = rte_eth_dev_default_mac_addr_set (xd->device_index,
+ (struct ether_addr *)
+ xd->default_mac_address);
if (rv < 0)
- vlib_cli_output (vlib_get_main (),
- "rte_eth_dev_configure[%d]: err %d",
- xd->device_index, rv);
-
- rte_eth_dev_set_mtu (xd->device_index, hi->max_packet_bytes);
-
- if (xd->flags & DPDK_DEVICE_FLAG_ADMIN_UP)
- {
- int rv = rte_eth_dev_start (xd->device_index);
- if (!rv && xd->default_mac_address)
- rv = rte_eth_dev_default_mac_addr_set (xd->device_index,
- (struct ether_addr *)
- xd->default_mac_address);
- if (rv < 0)
- clib_warning ("rte_eth_dev_start %d returned %d",
- xd->device_index, rv);
- }
+ clib_warning ("rte_eth_dev_start %d returned %d",
+ xd->device_index, rv);
}
+
}
return old;
}
@@ -655,11 +634,13 @@ dpdk_lib_init (dpdk_main_t * dm)
{
xd->tx_conf.txq_flags |= ETH_TXQ_FLAGS_NOMULTSEGS;
port_conf_template.rxmode.jumbo_frame = 0;
+ port_conf_template.rxmode.enable_scatter = 0;
}
else
{
xd->tx_conf.txq_flags &= ~ETH_TXQ_FLAGS_NOMULTSEGS;
port_conf_template.rxmode.jumbo_frame = 1;
+ port_conf_template.rxmode.enable_scatter = 1;
xd->flags |= DPDK_DEVICE_FLAG_MAYBE_MULTISEG;
}
@@ -1068,16 +1049,13 @@ dpdk_lib_init (dpdk_main_t * dm)
hi = vnet_get_hw_interface (dm->vnet_main, xd->vlib_hw_if_index);
/*
- * DAW-FIXME: The Cisco VIC firmware does not provide an api for a
- * driver to dynamically change the mtu. If/when the
- * VIC firmware gets fixed, then this should be removed.
+ * For cisco VIC vNIC, set default to VLAN strip enabled, unless
+ * specified otherwise in the startup config.
+ * For other NICs default to VLAN strip disabled, unless specified
+ * otherwis in the startup config.
*/
if (xd->pmd == VNET_DPDK_PMD_ENIC)
{
- /*
- * Initialize mtu to what has been set by CIMC in the firmware cfg.
- */
- hi->max_packet_bytes = dev_info.max_rx_pktlen;
if (devconf->vlan_strip_offload != DPDK_DEVICE_VLAN_STRIP_OFF)
vlan_strip = 1; /* remove vlan tag from VIC port by default */
else