Reorganize source tree to use single autotools instance

Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>

1 files changed, 0 insertions, 148 deletions

diff --git a/vnet/vnet/ip/ip_source_and_port_range_check.h b/vnet/vnet/ip/ip_source_and_port_range_check.h
deleted file mode 100644
index fefe5ff1fd9..00000000000
--- a/vnet/vnet/ip/ip_source_and_port_range_check.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (c) 2015 Cisco and/or its affiliates.
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef included_ip_ip_source_and_port_range_check_h
-#define included_ip_ip_source_and_port_range_check_h
-
-
-typedef struct
-{
-  /* convenience */
-  vlib_main_t *vlib_main;
-  vnet_main_t *vnet_main;
-} source_range_check_main_t;
-
-source_range_check_main_t source_range_check_main;
-
-typedef enum
-{
-  IP_SOURCE_AND_PORT_RANGE_CHECK_PROTOCOL_TCP_OUT,
-  IP_SOURCE_AND_PORT_RANGE_CHECK_PROTOCOL_UDP_OUT,
-  IP_SOURCE_AND_PORT_RANGE_CHECK_PROTOCOL_TCP_IN,
-  IP_SOURCE_AND_PORT_RANGE_CHECK_PROTOCOL_UDP_IN,
-  IP_SOURCE_AND_PORT_RANGE_CHECK_N_PROTOCOLS,
-} ip_source_and_port_range_check_protocol_t;
-
-typedef struct
-{
-  u32 fib_index[IP_SOURCE_AND_PORT_RANGE_CHECK_N_PROTOCOLS];
-} ip_source_and_port_range_check_config_t;
-
-#define IP_SOURCE_AND_PORT_RANGE_CHECK_RANGE_LIMIT VLIB_BUFFER_PRE_DATA_SIZE/(2*sizeof(u16x8));
-
-typedef struct
-{
-  union
-  {
-    u16x8 as_u16x8;
-    u16 as_u16[8];
-  };
-} u16x8vec_t;
-
-typedef struct
-{
-  u16x8vec_t low;
-  u16x8vec_t hi;
-} protocol_port_range_t;
-
-/**
- * @brief The number of supported ranges per-data path object.
- * If more ranges are required, bump this number.
- */
-#define N_PORT_RANGES_PER_DPO  64
-#define N_RANGES_PER_BLOCK (sizeof(u16x8vec_t)/2)
-#define N_BLOCKS_PER_DPO (N_PORT_RANGES_PER_DPO/N_RANGES_PER_BLOCK)
-
-/**
- * @brief
- *  The object that is in the data-path to perform the check.
- *
- * Some trade-offs here; memory vs performance.
- *
- * performance:
- *  the principle factor is d-cache line misses/hits.
- *  so we want the data layout to minimise the d-cache misses. This
- *  means not following dependent reads. i.e. not doing
- *
- *   struct B {
- *     u16 n_ranges;
- *     range_t *ragnes; // vector of ranges.
- *   }
- *
- *   so to read ranges[0] we would first d-cache miss on the address
- *   of the object of type B, for which we would need to wait before we
- *   can get the address of B->ranges.
- *   So this layout is better:
- *
- *  struct B {
- *    u16 n_ranges;
- *    range_t ragnes[N];
- *  }
- *
- * memory:
- *  the latter layout above is more memory hungry. And N needs to be:
- *   1 - sized for the maximum required
- *   2 - fixed, so that objects of type B can be pool allocated and so
- *       'get'-able using an index.
- *       An option over fixed might be to allocate contiguous chunk from
- *       the pool (like we used to do for multi-path adjs).
- */
-typedef struct protocol_port_range_dpo_t_
-{
-  /**
-   * The number of blocks from the 'block' array below
-   * that have rnages configured. We keep this count so that in the data-path
-   * we can limit the loop to be only over the blocks we need
-   */
-  u16 n_used_blocks;
-
-  /**
-   * The total number of free ranges from all blocks.
-   * Used to prevent overrun of the ranges available.
-   */
-  u16 n_free_ranges;
-
-  /**
-   * the fixed size array of ranges
-   */
-  protocol_port_range_t blocks[N_BLOCKS_PER_DPO];
-} protocol_port_range_dpo_t;
-
-int ip4_source_and_port_range_check_add_del (ip4_address_t * address,
-					     u32 length,
-					     u32 vrf_id,
-					     u16 * low_ports,
-					     u16 * hi_ports, int is_add);
-
-// This will be moved to another file in another patch -- for API freeze
-int ip6_source_and_port_range_check_add_del (ip6_address_t * address,
-					     u32 length,
-					     u32 vrf_id,
-					     u16 * low_ports,
-					     u16 * hi_ports, int is_add);
-
-int set_ip_source_and_port_range_check (vlib_main_t * vm,
-					u32 * fib_index,
-					u32 sw_if_index, u32 is_add);
-
-#endif /* included ip_source_and_port_range_check_h */
-
-/*
- * fd.io coding-style-patch-verification: ON
- *
- * Local Variables:
- * eval: (c-set-style "gnu")
- * End:
- */