diff options
Diffstat (limited to 'docs/usecases')
| -rw-r--r-- | docs/usecases/containers/Routing.rst | 8 | ||||
| -rw-r--r-- | docs/usecases/containers/containerCreation.rst | 41 | ||||
| -rw-r--r-- | docs/usecases/containers/containerSetup.rst | 5 | ||||
| -rw-r--r-- | docs/usecases/containers/index.rst | 1 |
4 files changed, 26 insertions, 29 deletions
diff --git a/docs/usecases/containers/Routing.rst b/docs/usecases/containers/Routing.rst index b9d3bc97638..a468d239709 100644 --- a/docs/usecases/containers/Routing.rst +++ b/docs/usecases/containers/Routing.rst @@ -63,11 +63,9 @@ Run some commands to verify the changes: 32: veth_link1 inet 172.16.1.2/24 scope global veth_link1\ valid_lft forever preferred_lft forever 32: veth_link1 inet6 fe80::2c9d:83ff:fe33:37e/64 scope link \ valid_lft forever preferred_lft forever - root@cone:/# route - Kernel IP routing table - Destination Gateway Genmask Flags Metric Ref Use Iface - default 172.16.1.1 0.0.0.0 UG 0 0 0 veth_link1 - 172.16.1.0 * 255.255.255.0 U 0 0 0 veth_link1 + root@cone:/# ip route + default via 172.16.1.1 dev veth_link1 + 172.16.1.0/24 dev veth_link1 proto kernel scope link src 172.16.1.2 We see that the IP has been assigned, as well as our default gateway. diff --git a/docs/usecases/containers/containerCreation.rst b/docs/usecases/containers/containerCreation.rst index bb116883e7d..dbd18ea40d6 100644 --- a/docs/usecases/containers/containerCreation.rst +++ b/docs/usecases/containers/containerCreation.rst @@ -19,7 +19,7 @@ Then install packages for containers such as lxc: # apt-get install bridge-utils lxc -As quoted from the `lxc.conf manpage <https://linuxcontainers.org/it/lxc/manpages/man5/lxc.conf.5.html>`_, "container configuration is held in the config stored in the container's directory. +As quoted from the `lxc.conf manpage <https://linuxcontainers.org/lxc/manpages/man5/lxc.conf.5.html>`_, "container configuration is held in the config stored in the container's directory. A basic configuration is generated at container creation time with the default's recommended for the chosen template as well as extra default keys coming from the default.conf file." "That *default.conf* file is either located at /etc/lxc/default.conf or for unprivileged containers at ~/.config/lxc/default.conf." @@ -31,10 +31,10 @@ Look at the contents of *default.conf*, which should initially look like this: .. code-block:: console # cat /etc/lxc/default.conf - lxc.network.type = veth - lxc.network.link = lxcbr0 - lxc.network.flags = up - lxc.network.hwaddr = 00:16:3e:xx:xx:xx + lxc.net.0.type = veth + lxc.net.0.link = lxcbr0 + lxc.net.0.flags = up + lxc.net.0.hwaddr = 00:16:3e:xx:xx:xx As you can see, by default there is one veth interface. @@ -44,36 +44,36 @@ You can do this by piping *echo* output into *tee*, where each line is separated .. code-block:: console - # echo -e "lxc.network.name = veth0\nlxc.network.type = veth\nlxc.network.name = veth_link1" | sudo tee -a /etc/lxc/default.conf + # echo -e "lxc.net.0.name = veth0\nlxc.net.1.type = veth\nlxc.net.1.name = veth_link1" | sudo tee -a /etc/lxc/default.conf Inspect the contents again to verify the file was indeed modified: .. code-block:: console # cat /etc/lxc/default.conf - lxc.network.type = veth - lxc.network.link = lxcbr0 - lxc.network.flags = up - lxc.network.hwaddr = 00:16:3e:xx:xx:xx - lxc.network.name = veth0 - lxc.network.type = veth - lxc.network.name = veth_link1 + lxc.net.0.type = veth + lxc.net.0.link = lxcbr0 + lxc.net.0.flags = up + lxc.net.0.hwaddr = 00:16:3e:xx:xx:xx + lxc.net.0.name = veth0 + lxc.net.1.type = veth + lxc.net.1.name = veth_link After this, we're ready to create the containers. -Creates an Ubuntu Xenial container named "cone". +Creates an Ubuntu Focal container named "cone". .. code-block:: console - # lxc-create -t download -n cone -- --dist ubuntu --release xenial --arch amd64 --keyserver hkp://p80.pool.sks-keyservers.net:80 + # lxc-create -t download -n cone -- --dist ubuntu --release focal --arch amd64 If successful, you'll get an output similar to this: .. code-block:: console - You just created an Ubuntu xenial amd64 (20180625_07:42) container. + You just created an Ubuntu focal amd64 (20231027_07:42) container. To enable SSH, run: apt install openssh-server No default root or user password are set by LXC. @@ -83,8 +83,7 @@ Make another container "ctwo". .. code-block:: console - # lxc-create -t download -n ctwo -- --dist ubuntu --release xenial --arch amd64 --keyserver hkp://p80.pool.sks-keyservers.net:80 - + # lxc-create -t download -n ctwo -- --dist ubuntu --release focal --arch amd64 List your containers to verify they exist: @@ -106,9 +105,9 @@ And verify its running: .. code-block:: console # lxc-ls --fancy - NAME STATE AUTOSTART GROUPS IPV4 IPV6 - cone RUNNING 0 - - - - ctwo STOPPED 0 - - - + NAME STATE AUTOSTART GROUPS IPV4 IPV6 UNPRIVILEGED + cone RUNNING 0 - - - false + ctwo STOPPED 0 - - - false .. note:: diff --git a/docs/usecases/containers/containerSetup.rst b/docs/usecases/containers/containerSetup.rst index 8c458f77cfd..31b81711e84 100644 --- a/docs/usecases/containers/containerSetup.rst +++ b/docs/usecases/containers/containerSetup.rst @@ -18,10 +18,9 @@ Run the linux DHCP setup and install VPP: .. code-block:: console - root@cone:/# resolvconf -d eth0 root@cone:/# dhclient - root@cone:/# apt-get install -y wget - root@cone:/# echo "deb [trusted=yes] https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./" | sudo tee -a /etc/apt/sources.list.d/99fd.io.list + root@cone:/# apt-get install -y curl + root@cone:/# curl -s https://packagecloud.io/install/repositories/fdio/release/script.deb.sh | sudo bash root@cone:/# apt-get update root@cone:/# apt-get install -y --force-yes vpp root@cone:/# sh -c 'echo \"\\ndpdk {\\n no-pci\\n}\" >> /etc/vpp/startup.conf' diff --git a/docs/usecases/containers/index.rst b/docs/usecases/containers/index.rst index 65bf2aee5de..f8e07222493 100644 --- a/docs/usecases/containers/index.rst +++ b/docs/usecases/containers/index.rst @@ -5,6 +5,7 @@ VPP with Containers This section will cover connecting two Linux containers with VPP. A container is essentially a more efficient and faster VM, due to the fact that a container does not simulate a separate kernel and hardware. You can read more about `Linux containers here <https://linuxcontainers.org/>`_. +This section has been tested with Ubuntu 22.04 LTS. .. toctree:: |