aboutsummaryrefslogtreecommitdiffstats
path: root/extras/vpp_config/scripts
diff options
context:
space:
mode:
Diffstat (limited to 'extras/vpp_config/scripts')
-rwxr-xr-xextras/vpp_config/scripts/clean.sh73
-rwxr-xr-xextras/vpp_config/scripts/cp-data.sh74
-rwxr-xr-xextras/vpp_config/scripts/dpdk-devbind.py651
-rwxr-xr-xextras/vpp_config/scripts/vpp-config30
4 files changed, 828 insertions, 0 deletions
diff --git a/extras/vpp_config/scripts/clean.sh b/extras/vpp_config/scripts/clean.sh
new file mode 100755
index 00000000000..908e6297fe3
--- /dev/null
+++ b/extras/vpp_config/scripts/clean.sh
@@ -0,0 +1,73 @@
+#!/bin/bash -x
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+check_os()
+{
+
+ # perform some very rudimentary platform detection
+ lsb_dist=''
+ if command_exists lsb_release; then
+ lsb_dist="$(lsb_release -si)"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/lsb-release ]; then
+ lsb_dist="$(. /etc/lsb-release && echo "$DISTRIB_ID")"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/fedora-release ]; then
+ lsb_dist='fedora'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/centos-release ]; then
+ lsb_dist='centos'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/os-release ]; then
+ lsb_dist="$(. /etc/os-release && echo "$ID")"
+ fi
+
+ lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
+ case "$lsb_dist" in
+ fedora|centos|ubuntu|debian)
+ ;;
+ *)
+ echo "Operating system [$lsb_dist] is unsupported"
+ exit 0
+ ;;
+ esac
+ LSB=$lsb_dist
+}
+
+check_os
+case "$LSB" in
+ centos)
+ ROOTDIR='/usr'
+ ;;
+ ubuntu)
+ ROOTDIR='/usr/local'
+ ;;
+ *)
+ echo "$LSB is not supported"
+ exit 1
+ ;;
+esac
+
+sudo -H pip uninstall vpp-config
+sudo rm *~
+sudo rm *.pyc
+sudo rm vpplib/*~
+sudo rm vpplib/*.pyc
+sudo rm scripts/*~
+sudo rm data/*~
+sudo rm -r build
+sudo rm -r dist
+sudo rm -r vpp_config.egg-info
+sudo rm -r $ROOTDIR/vpp/vpp-config
+sudo rm $ROOTDIR/bin/vpp-config
diff --git a/extras/vpp_config/scripts/cp-data.sh b/extras/vpp_config/scripts/cp-data.sh
new file mode 100755
index 00000000000..a0053dce074
--- /dev/null
+++ b/extras/vpp_config/scripts/cp-data.sh
@@ -0,0 +1,74 @@
+#!/bin/bash -x
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+check_os()
+{
+
+ # perform some very rudimentary platform detection
+ lsb_dist=''
+ if command_exists lsb_release; then
+ lsb_dist="$(lsb_release -si)"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/lsb-release ]; then
+ lsb_dist="$(. /etc/lsb-release && echo "$DISTRIB_ID")"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/fedora-release ]; then
+ lsb_dist='fedora'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/centos-release ]; then
+ lsb_dist='centos'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/os-release ]; then
+ lsb_dist="$(. /etc/os-release && echo "$ID")"
+ fi
+
+ lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
+ case "$lsb_dist" in
+ fedora|centos|ubuntu|debian)
+ ;;
+ *)
+ echo "Operating system [$lsb_dist] is unsupported"
+ exit 0
+ ;;
+ esac
+ LSB=$lsb_dist
+}
+
+check_os
+case "$LSB" in
+ centos)
+ ROOTDIR='/usr'
+ ;;
+ ubuntu)
+ ROOTDIR='/usr/local'
+ ;;
+ *)
+ echo "$LSB is not supported"
+ exit 1
+ ;;
+esac
+
+sudo mkdir $ROOTDIR/vpp
+sudo mkdir $ROOTDIR/vpp/vpp-config
+sudo mkdir $ROOTDIR/vpp/vpp-config/dryrun
+sudo mkdir $ROOTDIR/vpp/vpp-config/scripts
+sudo mkdir $ROOTDIR/vpp/vpp-config/configs
+sudo mkdir $ROOTDIR/vpp/vpp-config/dryrun/default
+sudo mkdir $ROOTDIR/vpp/vpp-config/dryrun/sysctl.d
+sudo mkdir $ROOTDIR/vpp/vpp-config/dryrun/vpp
+sudo cp data/auto-config.yaml $ROOTDIR/vpp/vpp-config/configs/.
+sudo cp data/grub.template $ROOTDIR/vpp/vpp-config/dryrun/default/.
+sudo cp data/startup.conf.template $ROOTDIR/vpp/vpp-config/dryrun/vpp/.
+sudo cp data/80-vpp.conf.template $ROOTDIR/vpp/vpp-config/dryrun/sysctl.d/.
+sudo cp scripts/dpdk-devbind.py $ROOTDIR/vpp/vpp-config/scripts/.
diff --git a/extras/vpp_config/scripts/dpdk-devbind.py b/extras/vpp_config/scripts/dpdk-devbind.py
new file mode 100755
index 00000000000..f1d374d6b08
--- /dev/null
+++ b/extras/vpp_config/scripts/dpdk-devbind.py
@@ -0,0 +1,651 @@
+#! /usr/bin/python
+#
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+import sys
+import os
+import getopt
+import subprocess
+from os.path import exists, abspath, dirname, basename
+
+# The PCI base class for NETWORK devices
+NETWORK_BASE_CLASS = "02"
+CRYPTO_BASE_CLASS = "0b"
+
+# global dict ethernet devices present. Dictionary indexed by PCI address.
+# Each device within this is itself a dictionary of device properties
+devices = {}
+# list of supported DPDK drivers
+dpdk_drivers = ["igb_uio", "vfio-pci", "uio_pci_generic"]
+
+# command-line arg flags
+b_flag = None
+status_flag = False
+force_flag = False
+args = []
+
+
+def usage():
+ '''Print usage information for the program'''
+ argv0 = basename(sys.argv[0])
+ print("""
+Usage:
+------
+
+ %(argv0)s [options] DEVICE1 DEVICE2 ....
+
+where DEVICE1, DEVICE2 etc, are specified via PCI "domain:bus:slot.func" syntax
+or "bus:slot.func" syntax. For devices bound to Linux kernel drivers, they may
+also be referred to by Linux interface name e.g. eth0, eth1, em0, em1, etc.
+
+Options:
+ --help, --usage:
+ Display usage information and quit
+
+ -s, --status:
+ Print the current status of all known network and crypto devices.
+ For each device, it displays the PCI domain, bus, slot and function,
+ along with a text description of the device. Depending upon whether the
+ device is being used by a kernel driver, the igb_uio driver, or no
+ driver, other relevant information will be displayed:
+ * the Linux interface name e.g. if=eth0
+ * the driver being used e.g. drv=igb_uio
+ * any suitable drivers not currently using that device
+ e.g. unused=igb_uio
+ NOTE: if this flag is passed along with a bind/unbind option, the
+ status display will always occur after the other operations have taken
+ place.
+
+ -b driver, --bind=driver:
+ Select the driver to use or \"none\" to unbind the device
+
+ -u, --unbind:
+ Unbind a device (Equivalent to \"-b none\")
+
+ --force:
+ By default, network devices which are used by Linux - as indicated by having
+ routes in the routing table - cannot be modified. Using the --force
+ flag overrides this behavior, allowing active links to be forcibly
+ unbound.
+ WARNING: This can lead to loss of network connection and should be used
+ with caution.
+
+Examples:
+---------
+
+To display current device status:
+ %(argv0)s --status
+
+To bind eth1 from the current driver and move to use igb_uio
+ %(argv0)s --bind=igb_uio eth1
+
+To unbind 0000:01:00.0 from using any driver
+ %(argv0)s -u 0000:01:00.0
+
+To bind 0000:02:00.0 and 0000:02:00.1 to the ixgbe kernel driver
+ %(argv0)s -b ixgbe 02:00.0 02:00.1
+
+ """ % locals()) # replace items from local variables
+
+
+# This is roughly compatible with check_output function in subprocess module
+# which is only available in python 2.7.
+def check_output(args, stderr=None):
+ '''Run a command and capture its output'''
+ return subprocess.Popen(args, stdout=subprocess.PIPE,
+ stderr=stderr).communicate()[0]
+
+
+def find_module(mod):
+ '''find the .ko file for kernel module named mod.
+ Searches the $RTE_SDK/$RTE_TARGET directory, the kernel
+ modules directory and finally under the parent directory of
+ the script '''
+ # check $RTE_SDK/$RTE_TARGET directory
+ if 'RTE_SDK' in os.environ and 'RTE_TARGET' in os.environ:
+ path = "%s/%s/kmod/%s.ko" % (os.environ['RTE_SDK'],
+ os.environ['RTE_TARGET'], mod)
+ if exists(path):
+ return path
+
+ # check using depmod
+ try:
+ depmod_out = check_output(["modinfo", "-n", mod],
+ stderr=subprocess.STDOUT).lower()
+ if "error" not in depmod_out:
+ path = depmod_out.strip()
+ if exists(path):
+ return path
+ except: # if modinfo can't find module, it fails, so continue
+ pass
+
+ # check for a copy based off current path
+ tools_dir = dirname(abspath(sys.argv[0]))
+ if (tools_dir.endswith("tools")):
+ base_dir = dirname(tools_dir)
+ find_out = check_output(["find", base_dir, "-name", mod + ".ko"])
+ if len(find_out) > 0: # something matched
+ path = find_out.splitlines()[0]
+ if exists(path):
+ return path
+
+
+def check_modules():
+ '''Checks that igb_uio is loaded'''
+ global dpdk_drivers
+
+ # list of supported modules
+ mods = [{"Name": driver, "Found": False} for driver in dpdk_drivers]
+
+ # first check if module is loaded
+ try:
+ # Get list of sysfs modules (both built-in and dynamically loaded)
+ sysfs_path = '/sys/module/'
+
+ # Get the list of directories in sysfs_path
+ sysfs_mods = [os.path.join(sysfs_path, o) for o
+ in os.listdir(sysfs_path)
+ if os.path.isdir(os.path.join(sysfs_path, o))]
+
+ # Extract the last element of '/sys/module/abc' in the array
+ sysfs_mods = [a.split('/')[-1] for a in sysfs_mods]
+
+ # special case for vfio_pci (module is named vfio-pci,
+ # but its .ko is named vfio_pci)
+ sysfs_mods = map(lambda a:
+ a if a != 'vfio_pci' else 'vfio-pci', sysfs_mods)
+
+ for mod in mods:
+ if mod["Name"] in sysfs_mods:
+ mod["Found"] = True
+ except:
+ pass
+
+ # check if we have at least one loaded module
+ if True not in [mod["Found"] for mod in mods] and b_flag is not None:
+ if b_flag in dpdk_drivers:
+ print("Error - no supported modules(DPDK driver) are loaded")
+ sys.exit(1)
+ else:
+ print("Warning - no supported modules(DPDK driver) are loaded")
+
+ # change DPDK driver list to only contain drivers that are loaded
+ dpdk_drivers = [mod["Name"] for mod in mods if mod["Found"]]
+
+
+def has_driver(dev_id):
+ '''return true if a device is assigned to a driver. False otherwise'''
+ return "Driver_str" in devices[dev_id]
+
+
+def get_pci_device_details(dev_id):
+ '''This function gets additional details for a PCI device'''
+ device = {}
+
+ extra_info = check_output(["lspci", "-vmmks", dev_id]).splitlines()
+
+ # parse lspci details
+ for line in extra_info:
+ if len(line) == 0:
+ continue
+ name, value = line.decode().split("\t", 1)
+ name = name.strip(":") + "_str"
+ device[name] = value
+ # check for a unix interface name
+ device["Interface"] = ""
+ for base, dirs, _ in os.walk("/sys/bus/pci/devices/%s/" % dev_id):
+ if "net" in dirs:
+ device["Interface"] = \
+ ",".join(os.listdir(os.path.join(base, "net")))
+ break
+ # check if a port is used for ssh connection
+ device["Ssh_if"] = False
+ device["Active"] = ""
+
+ return device
+
+
+def get_nic_details():
+ '''This function populates the "devices" dictionary. The keys used are
+ the pci addresses (domain:bus:slot.func). The values are themselves
+ dictionaries - one for each NIC.'''
+ global devices
+ global dpdk_drivers
+
+ # clear any old data
+ devices = {}
+ # first loop through and read details for all devices
+ # request machine readable format, with numeric IDs
+ dev = {}
+ dev_lines = check_output(["lspci", "-Dvmmn"]).splitlines()
+ for dev_line in dev_lines:
+ if (len(dev_line) == 0):
+ if dev["Class"][0:2] == NETWORK_BASE_CLASS:
+ # convert device and vendor ids to numbers, then add to global
+ dev["Vendor"] = int(dev["Vendor"], 16)
+ dev["Device"] = int(dev["Device"], 16)
+ # use dict to make copy of dev
+ devices[dev["Slot"]] = dict(dev)
+ else:
+ name, value = dev_line.decode().split("\t", 1)
+ dev[name.rstrip(":")] = value
+
+ # check what is the interface if any for an ssh connection if
+ # any to this host, so we can mark it later.
+ ssh_if = []
+ route = check_output(["ip", "-o", "route"])
+ # filter out all lines for 169.254 routes
+ route = "\n".join(filter(lambda ln: not ln.startswith("169.254"),
+ route.decode().splitlines()))
+ rt_info = route.split()
+ for i in range(len(rt_info) - 1):
+ if rt_info[i] == "dev":
+ ssh_if.append(rt_info[i+1])
+
+ # based on the basic info, get extended text details
+ for d in devices.keys():
+ # get additional info and add it to existing data
+ devices[d] = devices[d].copy()
+ devices[d].update(get_pci_device_details(d).items())
+
+ for _if in ssh_if:
+ if _if in devices[d]["Interface"].split(","):
+ devices[d]["Ssh_if"] = True
+ devices[d]["Active"] = "*Active*"
+ break
+
+ # add igb_uio to list of supporting modules if needed
+ if "Module_str" in devices[d]:
+ for driver in dpdk_drivers:
+ if driver not in devices[d]["Module_str"]:
+ devices[d]["Module_str"] = \
+ devices[d]["Module_str"] + ",%s" % driver
+ else:
+ devices[d]["Module_str"] = ",".join(dpdk_drivers)
+
+ # make sure the driver and module strings do not have any duplicates
+ if has_driver(d):
+ modules = devices[d]["Module_str"].split(",")
+ if devices[d]["Driver_str"] in modules:
+ modules.remove(devices[d]["Driver_str"])
+ devices[d]["Module_str"] = ",".join(modules)
+
+
+def get_crypto_details():
+ '''This function populates the "devices" dictionary. The keys used are
+ the pci addresses (domain:bus:slot.func). The values are themselves
+ dictionaries - one for each NIC.'''
+ global devices
+ global dpdk_drivers
+
+ # clear any old data
+ # devices = {}
+ # first loop through and read details for all devices
+ # request machine readable format, with numeric IDs
+ dev = {}
+ dev_lines = check_output(["lspci", "-Dvmmn"]).splitlines()
+ for dev_line in dev_lines:
+ if (len(dev_line) == 0):
+ if (dev["Class"][0:2] == CRYPTO_BASE_CLASS):
+ # convert device and vendor ids to numbers, then add to global
+ dev["Vendor"] = int(dev["Vendor"], 16)
+ dev["Device"] = int(dev["Device"], 16)
+ # use dict to make copy of dev
+ devices[dev["Slot"]] = dict(dev)
+ else:
+ name, value = dev_line.decode().split("\t", 1)
+ dev[name.rstrip(":")] = value
+
+ # based on the basic info, get extended text details
+ for d in devices.keys():
+ # get additional info and add it to existing data
+ devices[d] = devices[d].copy()
+ devices[d].update(get_pci_device_details(d).items())
+
+ # add igb_uio to list of supporting modules if needed
+ if "Module_str" in devices[d]:
+ for driver in dpdk_drivers:
+ if driver not in devices[d]["Module_str"]:
+ devices[d]["Module_str"] = \
+ devices[d]["Module_str"] + ",%s" % driver
+ else:
+ devices[d]["Module_str"] = ",".join(dpdk_drivers)
+
+ # make sure the driver and module strings do not have any duplicates
+ if has_driver(d):
+ modules = devices[d]["Module_str"].split(",")
+ if devices[d]["Driver_str"] in modules:
+ modules.remove(devices[d]["Driver_str"])
+ devices[d]["Module_str"] = ",".join(modules)
+
+
+def dev_id_from_dev_name(dev_name):
+ '''Take a device "name" - a string passed in by user to identify a NIC
+ device, and determine the device id - i.e. the domain:bus:slot.func - for
+ it, which can then be used to index into the devices array'''
+
+ # check if it's already a suitable index
+ if dev_name in devices:
+ return dev_name
+ # check if it's an index just missing the domain part
+ elif "0000:" + dev_name in devices:
+ return "0000:" + dev_name
+ else:
+ # check if it's an interface name, e.g. eth1
+ for d in devices.keys():
+ if dev_name in devices[d]["Interface"].split(","):
+ return devices[d]["Slot"]
+ # if nothing else matches - error
+ print("Unknown device: %s. "
+ "Please specify device in \"bus:slot.func\" format" % dev_name)
+ sys.exit(1)
+
+
+def unbind_one(dev_id, force):
+ '''Unbind the device identified by "dev_id" from its current driver'''
+ dev = devices[dev_id]
+ if not has_driver(dev_id):
+ print("%s %s %s is not currently managed by any driver\n" %
+ (dev["Slot"], dev["Device_str"], dev["Interface"]))
+ return
+
+ # prevent us disconnecting ourselves
+ if dev["Ssh_if"] and not force:
+ print("Routing table indicates that interface %s is active. "
+ "Skipping unbind" % (dev_id))
+ return
+
+ # write to /sys to unbind
+ filename = "/sys/bus/pci/drivers/%s/unbind" % dev["Driver_str"]
+ try:
+ f = open(filename, "a")
+ except:
+ print("Error: unbind failed for %s - Cannot open %s"
+ % (dev_id, filename))
+ sys.exit(1)
+ f.write(dev_id)
+ f.close()
+
+
+def bind_one(dev_id, driver, force):
+ '''Bind the device given by "dev_id" to the driver "driver". If the device
+ is already bound to a different driver, it will be unbound first'''
+ dev = devices[dev_id]
+ saved_driver = None # used to rollback any unbind in case of failure
+
+ # prevent disconnection of our ssh session
+ if dev["Ssh_if"] and not force:
+ print("Routing table indicates that interface %s is active. "
+ "Not modifying" % (dev_id))
+ return
+
+ # unbind any existing drivers we don't want
+ if has_driver(dev_id):
+ if dev["Driver_str"] == driver:
+ print("%s already bound to driver %s, skipping\n"
+ % (dev_id, driver))
+ return
+ else:
+ saved_driver = dev["Driver_str"]
+ unbind_one(dev_id, force)
+ dev["Driver_str"] = "" # clear driver string
+
+ # if we are binding to one of DPDK drivers, add PCI id's to that driver
+ if driver in dpdk_drivers:
+ filename = "/sys/bus/pci/drivers/%s/new_id" % driver
+ try:
+ f = open(filename, "w")
+ except:
+ print("Error: bind failed for %s - Cannot open %s"
+ % (dev_id, filename))
+ return
+ try:
+ f.write("%04x %04x" % (dev["Vendor"], dev["Device"]))
+ f.close()
+ except:
+ print("Error: bind failed for %s - Cannot write new PCI ID to "
+ "driver %s" % (dev_id, driver))
+ return
+
+ # do the bind by writing to /sys
+ filename = "/sys/bus/pci/drivers/%s/bind" % driver
+ try:
+ f = open(filename, "a")
+ except:
+ print("Error: bind failed for %s - Cannot open %s"
+ % (dev_id, filename))
+ if saved_driver is not None: # restore any previous driver
+ bind_one(dev_id, saved_driver, force)
+ return
+ try:
+ f.write(dev_id)
+ f.close()
+ except:
+ # for some reason, closing dev_id after adding a new PCI ID to new_id
+ # results in IOError. however, if the device was successfully bound,
+ # we don't care for any errors and can safely ignore IOError
+ tmp = get_pci_device_details(dev_id)
+ if "Driver_str" in tmp and tmp["Driver_str"] == driver:
+ return
+ print("Error: bind failed for %s - Cannot bind to driver %s"
+ % (dev_id, driver))
+ if saved_driver is not None: # restore any previous driver
+ bind_one(dev_id, saved_driver, force)
+ return
+
+
+def unbind_all(dev_list, force=False):
+ """Unbind method, takes a list of device locations"""
+ dev_list = map(dev_id_from_dev_name, dev_list)
+ for d in dev_list:
+ unbind_one(d, force)
+
+
+def bind_all(dev_list, driver, force=False):
+ """Bind method, takes a list of device locations"""
+ global devices
+
+ dev_list = map(dev_id_from_dev_name, dev_list)
+
+ for d in dev_list:
+ bind_one(d, driver, force)
+
+ # when binding devices to a generic driver (i.e. one that doesn't have a
+ # PCI ID table), some devices that are not bound to any other driver could
+ # be bound even if no one has asked them to. hence, we check the list of
+ # drivers again, and see if some of the previously-unbound devices were
+ # erroneously bound.
+ for d in devices.keys():
+ # skip devices that were already bound or that we know should be bound
+ if "Driver_str" in devices[d] or d in dev_list:
+ continue
+
+ # update information about this device
+ devices[d] = dict(devices[d].items() +
+ get_pci_device_details(d).items())
+
+ # check if updated information indicates that the device was bound
+ if "Driver_str" in devices[d]:
+ unbind_one(d, force)
+
+
+def display_devices(title, dev_list, extra_params=None):
+ '''Displays to the user the details of a list of devices given in
+ "dev_list". The "extra_params" parameter, if given, should contain a string
+ with %()s fields in it for replacement by the named fields in each
+ device's dictionary.'''
+ strings = [] # this holds the strings to print. We sort before printing
+ print("\n%s" % title)
+ print("="*len(title))
+ if len(dev_list) == 0:
+ strings.append("<none>")
+ else:
+ for dev in dev_list:
+ if extra_params is not None:
+ strings.append("%s '%s' %s" % (dev["Slot"],
+ dev["Device_str"], extra_params % dev))
+ else:
+ strings.append("%s '%s'" % (dev["Slot"], dev["Device_str"]))
+ # sort before printing, so that the entries appear in PCI order
+ strings.sort()
+ print("\n".join(strings)) # print one per line
+
+
+def show_status():
+ '''Function called when the script is passed the "--status" option.
+ Displays to the user what devices are bound to the igb_uio driver, the
+ kernel driver or to no driver'''
+ global dpdk_drivers
+ kernel_drv = []
+ dpdk_drv = []
+ no_drv = []
+
+ # split our list of network devices into the three categories above
+ for d in devices.keys():
+ if (NETWORK_BASE_CLASS in devices[d]["Class"]):
+ if not has_driver(d):
+ no_drv.append(devices[d])
+ continue
+ if devices[d]["Driver_str"] in dpdk_drivers:
+ dpdk_drv.append(devices[d])
+ else:
+ kernel_drv.append(devices[d])
+
+ # print each category separately, so we can clearly see what's used by DPDK
+ display_devices("Network devices using DPDK-compatible driver", dpdk_drv,
+ "drv=%(Driver_str)s unused=%(Module_str)s")
+ display_devices("Network devices using kernel driver", kernel_drv,
+ "if=%(Interface)s drv=%(Driver_str)s "
+ "unused=%(Module_str)s %(Active)s")
+ display_devices("Other network devices", no_drv, "unused=%(Module_str)s")
+
+ # split our list of crypto devices into the three categories above
+ kernel_drv = []
+ dpdk_drv = []
+ no_drv = []
+
+ for d in devices.keys():
+ if (CRYPTO_BASE_CLASS in devices[d]["Class"]):
+ if not has_driver(d):
+ no_drv.append(devices[d])
+ continue
+ if devices[d]["Driver_str"] in dpdk_drivers:
+ dpdk_drv.append(devices[d])
+ else:
+ kernel_drv.append(devices[d])
+
+ display_devices("Crypto devices using DPDK-compatible driver", dpdk_drv,
+ "drv=%(Driver_str)s unused=%(Module_str)s")
+ display_devices("Crypto devices using kernel driver", kernel_drv,
+ "drv=%(Driver_str)s "
+ "unused=%(Module_str)s")
+ display_devices("Other crypto devices", no_drv, "unused=%(Module_str)s")
+
+
+def parse_args():
+ '''Parses the command-line arguments given by the user and takes the
+ appropriate action for each'''
+ global b_flag
+ global status_flag
+ global force_flag
+ global args
+ if len(sys.argv) <= 1:
+ usage()
+ sys.exit(0)
+
+ try:
+ opts, args = getopt.getopt(sys.argv[1:], "b:us",
+ ["help", "usage", "status", "force",
+ "bind=", "unbind"])
+ except getopt.GetoptError as error:
+ print(str(error))
+ print("Run '%s --usage' for further information" % sys.argv[0])
+ sys.exit(1)
+
+ for opt, arg in opts:
+ if opt == "--help" or opt == "--usage":
+ usage()
+ sys.exit(0)
+ if opt == "--status" or opt == "-s":
+ status_flag = True
+ if opt == "--force":
+ force_flag = True
+ if opt == "-b" or opt == "-u" or opt == "--bind" or opt == "--unbind":
+ if b_flag is not None:
+ print("Error - Only one bind or unbind may be specified\n")
+ sys.exit(1)
+ if opt == "-u" or opt == "--unbind":
+ b_flag = "none"
+ else:
+ b_flag = arg
+
+
+def do_arg_actions():
+ '''do the actual action requested by the user'''
+ global b_flag
+ global status_flag
+ global force_flag
+ global args
+
+ if b_flag is None and not status_flag:
+ print("Error: No action specified for devices."
+ "Please give a -b or -u option")
+ print("Run '%s --usage' for further information" % sys.argv[0])
+ sys.exit(1)
+
+ if b_flag is not None and len(args) == 0:
+ print("Error: No devices specified.")
+ print("Run '%s --usage' for further information" % sys.argv[0])
+ sys.exit(1)
+
+ if b_flag == "none" or b_flag == "None":
+ unbind_all(args, force_flag)
+ elif b_flag is not None:
+ bind_all(args, b_flag, force_flag)
+ if status_flag:
+ if b_flag is not None:
+ get_nic_details() # refresh if we have changed anything
+ get_crypto_details() # refresh if we have changed anything
+ show_status()
+
+
+def main():
+ '''program main function'''
+ parse_args()
+ check_modules()
+ get_nic_details()
+ get_crypto_details()
+ do_arg_actions()
+
+if __name__ == "__main__":
+ main()
diff --git a/extras/vpp_config/scripts/vpp-config b/extras/vpp_config/scripts/vpp-config
new file mode 100755
index 00000000000..8f5314bca72
--- /dev/null
+++ b/extras/vpp_config/scripts/vpp-config
@@ -0,0 +1,30 @@
+#!/usr/bin/python
+
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""VPP Configuration Utility Wrapper"""
+
+import os
+import sys
+import vpp_config as vppcfg
+
+# Check for root
+if not os.geteuid() == 0:
+ sys.exit('\nPlease run the VPP Configuration Utility as root.')
+
+# Setup
+vppcfg.autoconfig_setup()
+
+# Main menu
+vppcfg.autoconfig_main()