diff options
Diffstat (limited to 'src/vnet/error.h')
| -rw-r--r-- | src/vnet/error.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/src/vnet/error.h b/src/vnet/error.h new file mode 100644 index 00000000000..fa1337538c4 --- /dev/null +++ b/src/vnet/error.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: Apache-2.0 + * Copyright(c) 2022 Cisco Systems, Inc. + */ +#ifndef included_vnet_error_h +#define included_vnet_error_h + +#include <stdarg.h> +#include <vppinfra/types.h> +#include <vppinfra/format.h> + +#define foreach_vnet_error \ + _ (UNSPECIFIED, -1, "Unspecified Error") \ + _ (INVALID_SW_IF_INDEX, -2, "Invalid sw_if_index") \ + _ (NO_SUCH_FIB, -3, "No such FIB / VRF") \ + _ (NO_SUCH_INNER_FIB, -4, "No such inner FIB / VRF") \ + _ (NO_SUCH_LABEL, -5, "No such label") \ + _ (NO_SUCH_ENTRY, -6, "No such entry") \ + _ (INVALID_VALUE, -7, "Invalid value") \ + _ (INVALID_VALUE_2, -8, "Invalid value #2") \ + _ (UNIMPLEMENTED, -9, "Unimplemented") \ + _ (INVALID_SW_IF_INDEX_2, -10, "Invalid sw_if_index #2") \ + _ (SYSCALL_ERROR_1, -11, "System call error #1") \ + _ (SYSCALL_ERROR_2, -12, "System call error #2") \ + _ (SYSCALL_ERROR_3, -13, "System call error #3") \ + _ (SYSCALL_ERROR_4, -14, "System call error #4") \ + _ (SYSCALL_ERROR_5, -15, "System call error #5") \ + _ (SYSCALL_ERROR_6, -16, "System call error #6") \ + _ (SYSCALL_ERROR_7, -17, "System call error #7") \ + _ (SYSCALL_ERROR_8, -18, "System call error #8") \ + _ (SYSCALL_ERROR_9, -19, "System call error #9") \ + _ (SYSCALL_ERROR_10, -20, "System call error #10") \ + _ (FEATURE_DISABLED, -30, "Feature disabled by configuration") \ + _ (INVALID_REGISTRATION, -31, "Invalid registration") \ + _ (NEXT_HOP_NOT_IN_FIB, -50, "Next hop not in FIB") \ + _ (UNKNOWN_DESTINATION, -51, "Unknown destination") \ + _ (NO_PATHS_IN_ROUTE, -52, "No paths specified in route") \ + _ (NEXT_HOP_NOT_FOUND_MP, -53, "Next hop not found (multipath)") \ + _ (NO_MATCHING_INTERFACE, -54, "No matching interface for probe") \ + _ (INVALID_VLAN, -55, "Invalid VLAN") \ + _ (VLAN_ALREADY_EXISTS, -56, "VLAN subif already exists") \ + _ (INVALID_SRC_ADDRESS, -57, "Invalid src address") \ + _ (INVALID_DST_ADDRESS, -58, "Invalid dst address") \ + _ (ADDRESS_LENGTH_MISMATCH, -59, "Address length mismatch") \ + _ (ADDRESS_NOT_FOUND_FOR_INTERFACE, -60, "Address not found for interface") \ + _ (ADDRESS_NOT_DELETABLE, -61, "Address not deletable") \ + _ (IP6_NOT_ENABLED, -62, "ip6 not enabled") \ + _ (NO_SUCH_NODE, -63, "No such graph node") \ + _ (NO_SUCH_NODE2, -64, "No such graph node #2") \ + _ (NO_SUCH_TABLE, -65, "No such table") \ + _ (NO_SUCH_TABLE2, -66, "No such table #2") \ + _ (NO_SUCH_TABLE3, -67, "No such table #3") \ + _ (SUBIF_ALREADY_EXISTS, -68, "Subinterface already exists") \ + _ (SUBIF_CREATE_FAILED, -69, "Subinterface creation failed") \ + _ (INVALID_MEMORY_SIZE, -70, "Invalid memory size requested") \ + _ (INVALID_INTERFACE, -71, "Invalid interface") \ + _ (INVALID_VLAN_TAG_COUNT, -72, \ + "Invalid number of tags for requested operation") \ + _ (INVALID_ARGUMENT, -73, "Invalid argument") \ + _ (UNEXPECTED_INTF_STATE, -74, "Unexpected interface state") \ + _ (TUNNEL_EXIST, -75, "Tunnel already exists") \ + _ (INVALID_DECAP_NEXT, -76, "Invalid decap-next") \ + _ (RESPONSE_NOT_READY, -77, "Response not ready") \ + _ (NOT_CONNECTED, -78, "Not connected to the data plane") \ + _ (IF_ALREADY_EXISTS, -79, "Interface already exists") \ + _ (BOND_SLAVE_NOT_ALLOWED, -80, \ + "Operation not allowed on slave of BondEthernet") \ + _ (VALUE_EXIST, -81, "Value already exists") \ + _ (SAME_SRC_DST, -82, "Source and destination are the same") \ + _ (IP6_MULTICAST_ADDRESS_NOT_PRESENT, -83, \ + "IP6 multicast address required") \ + _ (SR_POLICY_NAME_NOT_PRESENT, -84, "Segment routing policy name required") \ + _ (NOT_RUNNING_AS_ROOT, -85, "Not running as root") \ + _ (ALREADY_CONNECTED, -86, "Connection to the data plane already exists") \ + _ (UNSUPPORTED_JNI_VERSION, -87, "Unsupported JNI version") \ + _ (IP_PREFIX_INVALID, -88, "IP prefix invalid (masked bits set in address") \ + _ (INVALID_WORKER, -89, "Invalid worker thread") \ + _ (LISP_DISABLED, -90, "LISP is disabled") \ + _ (CLASSIFY_TABLE_NOT_FOUND, -91, "Classify table not found") \ + _ (INVALID_EID_TYPE, -92, "Unsupported LISP EID type") \ + _ (CANNOT_CREATE_PCAP_FILE, -93, "Cannot create pcap file") \ + _ (INCORRECT_ADJACENCY_TYPE, -94, \ + "Invalid adjacency type for this operation") \ + _ (EXCEEDED_NUMBER_OF_RANGES_CAPACITY, -95, \ + "Operation would exceed configured capacity of ranges") \ + _ (EXCEEDED_NUMBER_OF_PORTS_CAPACITY, -96, \ + "Operation would exceed capacity of number of ports") \ + _ (INVALID_ADDRESS_FAMILY, -97, "Invalid address family") \ + _ (INVALID_SUB_SW_IF_INDEX, -98, "Invalid sub-interface sw_if_index") \ + _ (TABLE_TOO_BIG, -99, "Table too big") \ + _ (CANNOT_ENABLE_DISABLE_FEATURE, -100, "Cannot enable/disable feature") \ + _ (BFD_EEXIST, -101, "Duplicate BFD object") \ + _ (BFD_ENOENT, -102, "No such BFD object") \ + _ (BFD_EINUSE, -103, "BFD object in use") \ + _ (BFD_NOTSUPP, -104, "BFD feature not supported") \ + _ (ADDRESS_IN_USE, -105, "Address in use") \ + _ (ADDRESS_NOT_IN_USE, -106, "Address not in use") \ + _ (QUEUE_FULL, -107, "Queue full") \ + _ (APP_UNSUPPORTED_CFG, -108, "Unsupported application config") \ + _ (URI_FIFO_CREATE_FAILED, -109, "URI FIFO segment create failed") \ + _ (LISP_RLOC_LOCAL, -110, "RLOC address is local") \ + _ (BFD_EAGAIN, -111, "BFD object cannot be manipulated at this time") \ + _ (INVALID_GPE_MODE, -112, "Invalid GPE mode") \ + _ (LISP_GPE_ENTRIES_PRESENT, -113, "LISP GPE entries are present") \ + _ (ADDRESS_FOUND_FOR_INTERFACE, -114, "Address found for interface") \ + _ (SESSION_CONNECT, -115, "Session failed to connect") \ + _ (ENTRY_ALREADY_EXISTS, -116, "Entry already exists") \ + _ (SVM_SEGMENT_CREATE_FAIL, -117, "Svm segment create fail") \ + _ (APPLICATION_NOT_ATTACHED, -118, "Application not attached") \ + _ (BD_ALREADY_EXISTS, -119, "Bridge domain already exists") \ + _ (BD_IN_USE, -120, "Bridge domain has member interfaces") \ + _ (BD_NOT_MODIFIABLE, -121, "Bridge domain 0 can't be deleted/modified") \ + _ (BD_ID_EXCEED_MAX, -122, "Bridge domain ID exceeds 16M limit") \ + _ (SUBIF_DOESNT_EXIST, -123, "Subinterface doesn't exist") \ + _ (L2_MACS_EVENT_CLINET_PRESENT, -124, \ + "Client already exist for L2 MACs events") \ + _ (INVALID_QUEUE, -125, "Invalid queue") \ + _ (UNSUPPORTED, -126, "Unsupported") \ + _ (DUPLICATE_IF_ADDRESS, -127, \ + "Address already present on another interface") \ + _ (APP_INVALID_NS, -128, "Invalid application namespace") \ + _ (APP_WRONG_NS_SECRET, -129, "Wrong app namespace secret") \ + _ (APP_CONNECT_SCOPE, -130, "Connect scope") \ + _ (APP_ALREADY_ATTACHED, -131, "App already attached") \ + _ (SESSION_REDIRECT, -132, "Redirect failed") \ + _ (ILLEGAL_NAME, -133, "Illegal name") \ + _ (NO_NAME_SERVERS, -134, "No name servers configured") \ + _ (NAME_SERVER_NOT_FOUND, -135, "Name server not found") \ + _ (NAME_RESOLUTION_NOT_ENABLED, -136, "Name resolution not enabled") \ + _ (NAME_SERVER_FORMAT_ERROR, -137, "Server format error (bug!)") \ + _ (NAME_SERVER_NO_SUCH_NAME, -138, "No such name") \ + _ (NAME_SERVER_NO_ADDRESSES, -139, "No addresses available") \ + _ (NAME_SERVER_NEXT_SERVER, -140, "Retry with new server") \ + _ (APP_CONNECT_FILTERED, -141, "Connect was filtered") \ + _ (ACL_IN_USE_INBOUND, -142, "Inbound ACL in use") \ + _ (ACL_IN_USE_OUTBOUND, -143, "Outbound ACL in use") \ + _ (INIT_FAILED, -144, "Initialization Failed") \ + _ (NETLINK_ERROR, -145, "Netlink error") \ + _ (BIER_BSL_UNSUP, -146, "BIER bit-string-length unsupported") \ + _ (INSTANCE_IN_USE, -147, "Instance in use") \ + _ (INVALID_SESSION_ID, -148, "Session ID out of range") \ + _ (ACL_IN_USE_BY_LOOKUP_CONTEXT, -149, "ACL in use by a lookup context") \ + _ (INVALID_VALUE_3, -150, "Invalid value #3") \ + _ (NON_ETHERNET, -151, "Interface is not an Ethernet interface") \ + _ (BD_ALREADY_HAS_BVI, -152, "Bridge domain already has a BVI interface") \ + _ (INVALID_PROTOCOL, -153, "Invalid Protocol") \ + _ (INVALID_ALGORITHM, -154, "Invalid Algorithm") \ + _ (RSRC_IN_USE, -155, "Resource In Use") \ + _ (KEY_LENGTH, -156, "invalid Key Length") \ + _ (FIB_PATH_UNSUPPORTED_NH_PROTO, -157, "Unsupported FIB Path protocol") \ + _ (API_ENDIAN_FAILED, -159, "Endian mismatch detected") \ + _ (NO_CHANGE, -160, "No change in table") \ + _ (MISSING_CERT_KEY, -161, "Missing certifcate or key") \ + _ (LIMIT_EXCEEDED, -162, "limit exceeded") \ + _ (IKE_NO_PORT, -163, "port not managed by IKE") \ + _ (UDP_PORT_TAKEN, -164, "UDP port already taken") \ + _ (EAGAIN, -165, "Retry stream call with cursor") \ + _ (INVALID_VALUE_4, -166, "Invalid value #4") \ + _ (BUSY, -167, "Busy") \ + _ (BUG, -168, "Bug") \ + _ (FEATURE_ALREADY_DISABLED, -169, "Feature already disabled") \ + _ (FEATURE_ALREADY_ENABLED, -170, "Feature already enabled") \ + _ (INVALID_PREFIX_LENGTH, -171, "Invalid prefix length") + +typedef enum +{ +#define _(a, b, c) VNET_ERR_##a = (b), + foreach_vnet_error +#undef _ + VNET_N_ERROR, +} vnet_error_t; + +clib_error_t __clib_warn_unused_result *vnet_error (vnet_error_t code, + char *fmt, ...); + +format_function_t format_vnet_api_errno; + +#endif |