aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/lisp-gpe/lisp_gpe_packet.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/vnet/lisp-gpe/lisp_gpe_packet.h')
-rw-r--r--src/vnet/lisp-gpe/lisp_gpe_packet.h149
1 files changed, 149 insertions, 0 deletions
diff --git a/src/vnet/lisp-gpe/lisp_gpe_packet.h b/src/vnet/lisp-gpe/lisp_gpe_packet.h
new file mode 100644
index 00000000000..62ac9bd7015
--- /dev/null
+++ b/src/vnet/lisp-gpe/lisp_gpe_packet.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2016 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/**
+ * @file
+ * @brief LISP-GPE packet header structure
+ *
+ */
+
+#ifndef included_lisp_gpe_packet_h
+#define included_lisp_gpe_packet_h
+
+/*
+ * From draft-lewis-lisp-gpe-02.txt
+ *
+ * 0 1 2 3
+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |N|L|E|V|I|P|R|O|Ver| Reserved | Next Protocol |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | Instance ID/Locator-Status-Bits |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * N: The N-bit is the nonce-present bit. When this bit is set to 1,
+ * the low-order 24 bits of the first 32 bits of the LISP header
+ * contain a Nonce. See Section 6.3.1 for details. Both N- and
+ * V-bits MUST NOT be set in the same packet. If they are, a
+ * decapsulating ETR MUST treat the 'Nonce/Map-Version' field as
+ * having a Nonce value present.
+ *
+ * L: The L-bit is the 'Locator-Status-Bits' field enabled bit. When
+ * this bit is set to 1, the Locator-Status-Bits in the second
+ * 32 bits of the LISP header are in use.
+ *
+ * E: The E-bit is the echo-nonce-request bit. This bit MUST be ignored
+ * and has no meaning when the N-bit is set to 0. When the N-bit is
+ * set to 1 and this bit is set to 1, an ITR is requesting that the
+ * nonce value in the 'Nonce' field be echoed back in LISP-
+ * encapsulated packets when the ITR is also an ETR. See
+ * Section 6.3.1 for details.
+ *
+ * V: The V-bit is the Map-Version present bit. When this bit is set to
+ * 1, the N-bit MUST be 0. Refer to Section 6.6.3 for more details.
+ *
+ * I: The I-bit is the Instance ID bit. See Section 5.5 for more
+ * details. When this bit is set to 1, the 'Locator-Status-Bits'
+ * field is reduced to 8 bits and the high-order 24 bits are used as
+ * an Instance ID. If the L-bit is set to 0, then the low-order
+ * 8 bits are transmitted as zero and ignored on receipt.
+ *
+ * P Bit: Flag bit 5 is defined as the Next Protocol bit. The P bit
+ * MUST be set to 1 to indicate the presence of the 8 bit next
+ * protocol field.
+ *
+ * P = 0 indicates that the payload MUST conform to LISP as defined
+ * in [RFC6830].
+ *
+ * Flag bit 5 was chosen as the P bit because this flag bit is
+ * currently unallocated in LISP [RFC6830].
+ *
+ * O: Flag bit 7 is defined as the O bit. When the O bit is set to 1, the
+ * packet is an OAM packet and OAM processing MUST occur. The OAM
+ * protocol details are out of scope for this document. As with the
+ * P-bit, bit 7 is currently a reserved flag in [RFC6830].
+ *
+ * Next Protocol Field: The lower 8 bits of the first word are used to
+ * carry a next protocol. This next protocol field contains the
+ * protocol of the encapsulated payload packet.
+ *
+ * LISP [RFC6830] uses the lower 16 bits of the first word for either
+ * a nonce, an echo-nonce ([RFC6830]) or to support map-versioning
+ * ([RFC6834]). These are all optional capabilities that are
+ * indicated by setting the N, E, and the V bit respectively.
+ *
+ * To maintain the desired data plane compatibility, when the P bit
+ * is set, the N, E, and V bits MUST be set to zero.
+ *
+ * A new protocol registry will be requested from IANA for the Next
+ * Protocol field. This draft defines the following Next Protocol
+ * values:
+ *
+ * 0x1 : IPv4
+ * 0x2 : IPv6
+ * 0x3 : Ethernet
+ * 0x4: Network Service Header
+ */
+
+/** LISP-GPE header */
+typedef struct
+{
+ u8 flags;
+ u8 ver_res;
+ u8 res;
+ u8 next_protocol;
+ u32 iid;
+} lisp_gpe_header_t;
+
+#define foreach_lisp_gpe_flag_bit \
+_(N, 0x80) \
+_(L, 0x40) \
+_(E, 0x20) \
+_(V, 0x10) \
+_(I, 0x08) \
+_(P, 0x04) \
+_(O, 0x01)
+
+typedef enum
+{
+#define _(n,v) LISP_GPE_FLAGS_##n = v,
+ foreach_lisp_gpe_flag_bit
+#undef _
+} vnet_lisp_gpe_flag_bit_t;
+
+#define LISP_GPE_VERSION 0x0
+
+#define LISP_GPE_NEXT_PROTOCOL_IP4 0x1
+#define LISP_GPE_NEXT_PROTOCOL_IP6 0x2
+#define LISP_GPE_NEXT_PROTOCOL_ETHERNET 0x3
+#define LISP_GPE_NEXT_PROTOCOL_NSH 0x4
+
+typedef enum
+{
+ LISP_GPE_NEXT_PROTO_IP4 = 1,
+ LISP_GPE_NEXT_PROTO_IP6,
+ LISP_GPE_NEXT_PROTO_ETHERNET,
+ LISP_GPE_NEXT_PROTO_NSH,
+ LISP_GPE_NEXT_PROTOS
+} lisp_gpe_next_protocol_e;
+
+#endif /* included_lisp_gpe_packet_h */
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */