aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/policer/xlate.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/vnet/policer/xlate.c')
-rw-r--r--src/vnet/policer/xlate.c1505
1 files changed, 1505 insertions, 0 deletions
diff --git a/src/vnet/policer/xlate.c b/src/vnet/policer/xlate.c
new file mode 100644
index 00000000000..74a6eb23d0a
--- /dev/null
+++ b/src/vnet/policer/xlate.c
@@ -0,0 +1,1505 @@
+/*
+ * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <string.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <assert.h>
+#include <math.h>
+#include <stdint.h>
+
+#include <vlib/vlib.h>
+#include <vnet/vnet.h>
+
+#include <vnet/policer/xlate.h>
+#include <vnet/policer/police.h>
+
+#define INTERNAL_SS 1
+
+/* debugs */
+#define SSE2_QOS_DEBUG_ERROR(msg, args...) \
+ fformat(stderr, msg "\n", ##args);
+
+#define SSE2_QOS_DEBUG_INFO(msg, args...) \
+ fformat(stderr, msg "\n", ##args);
+
+
+#define SSE2_QOS_TR_ERR(TpParms...)
+// {
+// }
+
+#define SSE2_QOS_TR_INFO(TpParms...)
+
+#ifndef MIN
+#define MIN(x,y) (((x)<(y))?(x):(y))
+#endif
+
+#ifndef MAX
+#define MAX(x,y) (((x)>(y))?(x):(y))
+#endif
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AH_OFFSET 0
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AH_MASK 8
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AH_SHIFT 24
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_TYPE_OFFSET 2
+#define IPE_POLICER_FULL_WRITE_REQUEST_TYPE_MASK 2
+#define IPE_POLICER_FULL_WRITE_REQUEST_TYPE_SHIFT 10
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_CMD_OFFSET 3
+#define IPE_POLICER_FULL_WRITE_REQUEST_CMD_MASK 2
+#define IPE_POLICER_FULL_WRITE_REQUEST_CMD_SHIFT 0
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AL_OFFSET 4
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AL_MASK 32
+#define IPE_POLICER_FULL_WRITE_REQUEST_M40AL_SHIFT 0
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_RFC_OFFSET 8
+#define IPE_POLICER_FULL_WRITE_REQUEST_RFC_MASK 2
+#define IPE_POLICER_FULL_WRITE_REQUEST_RFC_SHIFT 30
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_AN_OFFSET 8
+#define IPE_POLICER_FULL_WRITE_REQUEST_AN_MASK 1
+#define IPE_POLICER_FULL_WRITE_REQUEST_AN_SHIFT 29
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_REXP_OFFSET 8
+#define IPE_POLICER_FULL_WRITE_REQUEST_REXP_MASK 4
+#define IPE_POLICER_FULL_WRITE_REQUEST_REXP_SHIFT 22
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_ARM_OFFSET 9
+#define IPE_POLICER_FULL_WRITE_REQUEST_ARM_MASK 11
+#define IPE_POLICER_FULL_WRITE_REQUEST_ARM_SHIFT 11
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_PRM_OFFSET 10
+#define IPE_POLICER_FULL_WRITE_REQUEST_PRM_MASK 11
+#define IPE_POLICER_FULL_WRITE_REQUEST_PRM_SHIFT 0
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLE_OFFSET 12
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLE_MASK 5
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLE_SHIFT 27
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLM_OFFSET 12
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLM_MASK 7
+#define IPE_POLICER_FULL_WRITE_REQUEST_CBLM_SHIFT 20
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLE_OFFSET 13
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLE_MASK 5
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLE_SHIFT 15
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLM_OFFSET 14
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLM_MASK 7
+#define IPE_POLICER_FULL_WRITE_REQUEST_EBLM_SHIFT 8
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_CB_OFFSET 16
+#define IPE_POLICER_FULL_WRITE_REQUEST_CB_MASK 31
+#define IPE_POLICER_FULL_WRITE_REQUEST_CB_SHIFT 0
+
+#define IPE_POLICER_FULL_WRITE_REQUEST_EB_OFFSET 20
+#define IPE_POLICER_FULL_WRITE_REQUEST_EB_MASK 31
+#define IPE_POLICER_FULL_WRITE_REQUEST_EB_SHIFT 0
+
+#define IPE_RFC_RFC2697 0x00000000
+#define IPE_RFC_RFC2698 0x00000001
+#define IPE_RFC_RFC4115 0x00000002
+#define IPE_RFC_MEF5CF1 0x00000003
+
+/* End of constants copied from sse_ipe_desc_fmt.h */
+
+/* Misc Policer specific definitions */
+#define SSE2_QOS_POLICER_FIXED_PKT_SIZE 256
+
+// TODO check what can be provided by hw macro based on ASIC
+#define SSE2_QOS_POL_TICKS_PER_SEC 1000LL /* 1 tick = 1 ms */
+
+/*
+ * Default burst, in ms (byte format)
+ */
+#define SSE2_QOS_POL_DEF_BURST_BYTE 100
+
+/*
+ * Minimum burst needs to be such that the largest packet size is accomodated
+ */
+// Do we need to get it from some lib?
+#define SSE2_QOS_POL_MIN_BURST_BYTE 9*1024
+
+
+/*
+ * Flag to indicate if AN is employed or not
+ * 1 - TRUE, 0 - FALSE
+ */
+#define SSE2_QOS_POL_ALLOW_NEGATIVE 1
+
+// Various Macros to take care of policer calculations
+
+#define SSE2_QOS_POL_COMM_BKT_MAX \
+ (1<<IPE_POLICER_FULL_WRITE_REQUEST_CB_MASK)
+#define SSE2_QOS_POL_EXTD_BKT_MAX \
+ (1<<IPE_POLICER_FULL_WRITE_REQUEST_EB_MASK)
+
+#define SSE2_QOS_POL_RATE_EXP_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_REXP_MASK)
+#define SSE2_QOS_POL_RATE_EXP_MAX ((1<<SSE2_QOS_POL_RATE_EXP_SIZE) - 1)
+#define SSE2_QOS_POL_AVG_RATE_MANT_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_ARM_MASK)
+#define SSE2_QOS_POL_AVG_RATE_MANT_MAX \
+ ((1<< SSE2_QOS_POL_AVG_RATE_MANT_SIZE) - 1)
+#define SSE2_QOS_POL_AVG_RATE_MAX \
+ (SSE2_QOS_POL_AVG_RATE_MANT_MAX << \
+ SSE2_QOS_POL_RATE_EXP_MAX)
+
+#define SSE2_QOS_POL_PEAK_RATE_MANT_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_PRM_MASK)
+#define SSE2_QOS_POL_PEAK_RATE_MANT_MAX \
+ ((1<<SSE2_QOS_POL_PEAK_RATE_MANT_SIZE) - 1)
+#define SSE2_QOS_POL_PEAK_RATE_MAX \
+ (SSE2_QOS_POL_PEAK_RATE_MANT_MAX << \
+ SSE2_QOS_POL_RATE_EXP_MAX)
+
+#define SSE2_QOS_POL_COMM_BKT_LIMIT_MANT_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_CBLM_MASK)
+#define SSE2_QOS_POL_COMM_BKT_LIMIT_MANT_MAX \
+ ((1<<SSE2_QOS_POL_COMM_BKT_LIMIT_MANT_SIZE) - 1)
+#define SSE2_QOS_POL_COMM_BKT_LIMIT_EXP_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_CBLE_MASK)
+#define SSE2_QOS_POL_COMM_BKT_LIMIT_EXP_MAX \
+ ((1<<SSE2_QOS_POL_COMM_BKT_LIMIT_EXP_SIZE) - 1)
+#define SSE2_QOS_POL_COMM_BKT_LIMIT_MAX \
+ ((u64)SSE2_QOS_POL_COMM_BKT_LIMIT_MANT_MAX << \
+ (u64)SSE2_QOS_POL_COMM_BKT_LIMIT_EXP_MAX)
+
+#define SSE2_QOS_POL_EXTD_BKT_LIMIT_MANT_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_EBLM_MASK)
+#define SSE2_QOS_POL_EXTD_BKT_LIMIT_MANT_MAX \
+ ((1<<SSE2_QOS_POL_EXTD_BKT_LIMIT_MANT_SIZE) - 1)
+#define SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_SIZE \
+ (IPE_POLICER_FULL_WRITE_REQUEST_EBLE_MASK)
+#define SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_MAX \
+ ((1<<SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_SIZE) - 1)
+#define SSE2_QOS_POL_EXT_BKT_LIMIT_MAX \
+ ((u64)SSE2_QOS_POL_EXTD_BKT_LIMIT_MANT_MAX << \
+ (u64)SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_MAX)
+
+/*
+ * Rates determine the units of the bucket
+ * 256.114688 Gbps < Rate 8 byte units
+ * 128.057344 Gbps < Rate <= 256.114688 Gbps 4 byte units
+ * 64.028672 Gbps < Rate <= 128.057344 Gbps 2 byte units
+ * Rate <= 64.028672 Gbps 1 byte units
+ *
+ * The code uses bytes per tick as oppose to Gigabits per second.
+ */
+#define RATE256 (256114688000LL / 8LL / SSE2_QOS_POL_TICKS_PER_SEC)
+#define RATE128 (128057344000LL / 8LL / SSE2_QOS_POL_TICKS_PER_SEC)
+#define RATE64 ( 64028672000LL / 8LL / SSE2_QOS_POL_TICKS_PER_SEC)
+
+#define RATE_OVER256_UNIT 8LL
+#define RATE_128TO256_UNIT 4LL
+#define RATE_64TO128_UNIT 2LL
+
+static int
+sse2_qos_pol_round (u64 numerator,
+ u64 denominator,
+ u64 * rounded_value, sse2_qos_round_type_en round_type)
+{
+ int rc = 0;
+
+ if (denominator == 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Illegal denominator");
+ SSE2_QOS_TR_ERR (SSE2_QOSRM_TP_ERR_59);
+ return (EINVAL);
+ }
+
+ switch (round_type)
+ {
+ case SSE2_QOS_ROUND_TO_CLOSEST:
+ *rounded_value = ((numerator + (denominator >> 1)) / denominator);
+ break;
+
+ case SSE2_QOS_ROUND_TO_UP:
+ *rounded_value = (numerator / denominator);
+ if ((*rounded_value * denominator) < numerator)
+ {
+ *rounded_value += 1;
+ }
+ break;
+
+ case SSE2_QOS_ROUND_TO_DOWN:
+ *rounded_value = (numerator / denominator);
+ break;
+
+ case SSE2_QOS_ROUND_INVALID:
+ default:
+ SSE2_QOS_DEBUG_ERROR ("Illegal round type");
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_60, round_type);
+ rc = EINVAL;
+ break;
+ }
+ return (rc);
+}
+
+
+static int
+sse2_pol_validate_cfg_params (sse2_qos_pol_cfg_params_st * cfg)
+{
+ u64 numer, denom, rnd_value;
+ u32 cir_hw, eir_hw;
+ int rc = 0;
+
+ if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698) &&
+ (cfg->rb.kbps.eir_kbps < cfg->rb.kbps.cir_kbps))
+ {
+ SSE2_QOS_DEBUG_ERROR ("CIR (%u kbps) is greater than PIR (%u kbps)",
+ cfg->rb.kbps.cir_kbps, cfg->rb.kbps.eir_kbps);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_39, cfg->rb.kbps.cir_kbps,
+ cfg->rb.kbps.eir_kbps);
+ return (EINVAL);
+ }
+
+ /*
+ * convert rates to bytes-per-tick
+ */
+ numer = (u64) (cfg->rb.kbps.cir_kbps);
+ denom = (u64) (8 * SSE2_QOS_POL_TICKS_PER_SEC) / 1000;
+ rc = sse2_qos_pol_round (numer, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert CIR to bytes/tick format");
+ // Error traced
+ return (rc);
+ }
+ cir_hw = (u32) rnd_value;
+
+ numer = (u64) (cfg->rb.kbps.eir_kbps);
+ rc = sse2_qos_pol_round (numer, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert EIR to bytes/tick format");
+ // Error traced
+ return (rc);
+ }
+ eir_hw = (u32) rnd_value;
+
+ if (cir_hw > SSE2_QOS_POL_AVG_RATE_MAX)
+ {
+ SSE2_QOS_DEBUG_ERROR ("hw cir (%u bytes/tick) is greater than the "
+ "max supported value (%u)", cir_hw,
+ SSE2_QOS_POL_AVG_RATE_MAX);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_84, cir_hw, SSE2_QOS_POL_AVG_RATE_MAX);
+ return (EINVAL);
+ }
+
+ if (eir_hw > SSE2_QOS_POL_PEAK_RATE_MAX)
+ {
+ SSE2_QOS_DEBUG_ERROR ("hw eir (%u bytes/tick) is greater than the "
+ "max supported value (%u). Capping it to the max. "
+ "supported value", eir_hw,
+ SSE2_QOS_POL_PEAK_RATE_MAX);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_85, eir_hw,
+ SSE2_QOS_POL_PEAK_RATE_MAX);
+ return (EINVAL);
+ }
+ /*
+ * CIR = 0, with bc != 0 is not allowed
+ */
+ if ((cfg->rb.kbps.cir_kbps == 0) && cfg->rb.kbps.cb_bytes)
+ {
+ SSE2_QOS_DEBUG_ERROR ("CIR = 0 with bc != 0");
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_55);
+ return (EINVAL);
+ }
+
+ if ((cfg->rb.kbps.eir_kbps == 0) &&
+ (cfg->rfc > SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697))
+ {
+ SSE2_QOS_DEBUG_ERROR ("EIR = 0 for a 2R3C policer (rfc: %u)", cfg->rfc);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_23, cfg->rb.kbps.eir_kbps, cfg->rfc);
+ return (EINVAL);
+ }
+
+ if (cfg->rb.kbps.eir_kbps &&
+ (cfg->rfc < SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698))
+ {
+ SSE2_QOS_DEBUG_ERROR ("EIR: %u kbps for a 1-rate policer (rfc: %u)",
+ cfg->rb.kbps.eir_kbps, cfg->rfc);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_23, cfg->rb.kbps.eir_kbps, cfg->rfc);
+ return (EINVAL);
+ }
+
+ if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C) && cfg->rb.kbps.eb_bytes)
+ {
+ SSE2_QOS_DEBUG_ERROR ("For a 1R1B policer, EB burst cannot be > 0");
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_56);
+ return (EINVAL);
+ }
+
+ return (0);
+}
+
+static void
+sse2_qos_convert_value_to_exp_mant_fmt (u64 value,
+ u16 max_exp_value,
+ u16 max_mant_value,
+ sse2_qos_round_type_en type,
+ u8 * exp, u32 * mant)
+{
+ u64 rnd_value;
+ u64 temp_mant;
+ u8 temp_exp;
+
+ /*
+ * Select the lowest possible exp, and the largest possible mant
+ */
+ temp_exp = 0;
+ temp_mant = value;
+ while (temp_exp <= max_exp_value)
+ {
+ if (temp_mant <= max_mant_value)
+ {
+ break;
+ }
+
+ temp_exp++;
+ rnd_value = 0;
+ (void) sse2_qos_pol_round ((u64) value, (u64) (1 << temp_exp),
+ &rnd_value, type);
+ temp_mant = rnd_value;
+ }
+
+ if (temp_exp > max_exp_value)
+ {
+ /*
+ * CAP mant to its max value, and decrement exp
+ */
+ temp_exp--;
+ temp_mant = max_mant_value;
+ }
+
+ *exp = temp_exp;
+ *mant = (u32) temp_mant;
+
+ SSE2_QOS_DEBUG_INFO ("value: 0x%llx, mant: %u, exp: %u", value, *mant,
+ *exp);
+ return;
+}
+
+static int
+sse2_pol_convert_cfg_rates_to_hw (sse2_qos_pol_cfg_params_st * cfg,
+ sse2_qos_pol_hw_params_st * hw)
+{
+ int rc = 0;
+ u32 cir_hw, eir_hw, hi_mant, hi_rate, cir_rnded, eir_rnded, eir_kbps;
+ u64 numer, denom, rnd_value;
+ u8 exp;
+
+ /*
+ * convert rates to bytes-per-tick (tick is 1ms)
+ * For rate conversion, the denominator is gonna be the same
+ */
+ denom = (u64) ((SSE2_QOS_POL_TICKS_PER_SEC * 8) / 1000);
+ numer = (u64) (cfg->rb.kbps.cir_kbps);
+ rc = sse2_qos_pol_round (numer, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR
+ ("Rounding error, rate: %d kbps, rounding_type: %d",
+ cfg->rb.kbps.cir_kbps, cfg->rnd_type);
+ // Error is traced
+ return (rc);
+ }
+ cir_hw = (u32) rnd_value;
+
+ if (cfg->rb.kbps.cir_kbps && (cir_hw == 0))
+ {
+ /*
+ * After rounding, cir_hw = 0. Bump it up
+ */
+ cir_hw = 1;
+ }
+
+ if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C)
+ {
+ eir_kbps = 0;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697)
+ {
+ eir_kbps = cfg->rb.kbps.cir_kbps;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115)
+ {
+ eir_kbps = cfg->rb.kbps.eir_kbps - cfg->rb.kbps.cir_kbps;
+ }
+ else
+ {
+ eir_kbps = cfg->rb.kbps.eir_kbps;
+ }
+
+ numer = (u64) eir_kbps;
+ rc = sse2_qos_pol_round (numer, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR
+ ("Rounding error, rate: %d kbps, rounding_type: %d", eir_kbps,
+ cfg->rnd_type);
+ // Error is traced
+ return (rc);
+ }
+ eir_hw = (u32) rnd_value;
+
+ if (eir_kbps && (eir_hw == 0))
+ {
+ /*
+ * After rounding, eir_hw = 0. Bump it up
+ */
+ eir_hw = 1;
+ }
+
+ SSE2_QOS_DEBUG_INFO ("cir_hw: %u bytes/tick, eir_hw: %u bytes/tick", cir_hw,
+ eir_hw);
+
+ if (cir_hw > eir_hw)
+ {
+ hi_rate = cir_hw;
+ }
+ else
+ {
+ hi_rate = eir_hw;
+ }
+
+ if ((cir_hw == 0) && (eir_hw == 0))
+ {
+ /*
+ * Both the rates are 0. Use exp = 15, and set the RFC to 4115. Also
+ * set AN = 0
+ */
+ exp = (u8) SSE2_QOS_POL_RATE_EXP_MAX;
+ hi_mant = 0;
+ hw->rfc = IPE_RFC_RFC4115;
+ hw->allow_negative = 0;
+ }
+ else
+ {
+ sse2_qos_convert_value_to_exp_mant_fmt (hi_rate,
+ (u16) SSE2_QOS_POL_RATE_EXP_MAX,
+ (u16)
+ SSE2_QOS_POL_AVG_RATE_MANT_MAX,
+ (sse2_qos_round_type_en)
+ cfg->rnd_type, &exp, &hi_mant);
+ }
+
+ denom = (1ULL << exp);
+ if (hi_rate == eir_hw)
+ {
+ hw->peak_rate_man = (u16) hi_mant;
+ rc = sse2_qos_pol_round ((u64) cir_hw, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ hw->avg_rate_man = (u16) rnd_value;
+ }
+ else
+ {
+ hw->avg_rate_man = (u16) hi_mant;
+ rc = sse2_qos_pol_round ((u64) eir_hw, denom, &rnd_value,
+ (sse2_qos_round_type_en) cfg->rnd_type);
+ hw->peak_rate_man = (u16) rnd_value;
+ }
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Rounding error");
+ // Error is traced
+ return (rc);
+ }
+ hw->rate_exp = exp;
+
+ if ((hw->avg_rate_man == 0) && (cfg->rb.kbps.cir_kbps))
+ {
+ /*
+ * cir was reduced to 0 during rounding. Bump it up
+ */
+ hw->avg_rate_man = 1;
+ SSE2_QOS_DEBUG_INFO ("CIR = 0 during rounding. Bump it up to %u "
+ "bytes/tick", (hw->avg_rate_man << hw->rate_exp));
+ }
+
+ if ((hw->peak_rate_man == 0) && eir_kbps)
+ {
+ /*
+ * eir was reduced to 0 during rounding. Bump it up
+ */
+ hw->peak_rate_man = 1;
+ SSE2_QOS_DEBUG_INFO ("EIR = 0 during rounding. Bump it up to %u "
+ "bytes/tick", (hw->peak_rate_man << hw->rate_exp));
+ }
+
+ cir_rnded = (hw->avg_rate_man << hw->rate_exp);
+ eir_rnded = (hw->peak_rate_man << hw->rate_exp);
+
+ SSE2_QOS_DEBUG_INFO ("Configured(rounded) values, cir: %u "
+ "kbps (mant: %u, exp: %u, rate: %u bytes/tick)",
+ cfg->rb.kbps.cir_kbps, hw->avg_rate_man,
+ hw->rate_exp, cir_rnded);
+
+ SSE2_QOS_DEBUG_INFO ("Configured(rounded) values, eir: %u "
+ "kbps (mant: %u, exp: %u, rate: %u bytes/tick)",
+ cfg->rb.kbps.eir_kbps, hw->peak_rate_man,
+ hw->rate_exp, eir_rnded);
+
+ return (rc);
+}
+
+/*****
+ * NAME
+ * sse2_pol_get_bkt_max
+ *
+ * PARAMETERS
+ * rate_hw - either the averate rate or peak rate
+ * bkt_max - bit width in the current bucket or extended bucket
+ *
+ * RETURNS
+ * u64 - maximum token bytes for the current or extended bucket
+ *
+ * DESCRIPTION
+ * The current bucket or extended bucket fields are in units of either
+ * 1,2,4,8 bytes based on the average or peak rate respective to current
+ * or extended bucket.
+ *
+ * To get the actual maximum number of bytes that can be stored in the
+ * field, the value must be multiplied by the units of either 1,2,4,8
+ * bytes based on the rate.
+ *****/
+u64
+sse2_pol_get_bkt_max (u64 rate_hw, u64 bkt_max)
+{
+ if (rate_hw <= RATE64)
+ {
+ return (bkt_max - 1);
+ }
+ else if (rate_hw <= RATE128)
+ {
+ return ((bkt_max * RATE_64TO128_UNIT) - RATE_64TO128_UNIT);
+ }
+ else if (rate_hw <= RATE256)
+ {
+ return ((bkt_max * RATE_128TO256_UNIT) - RATE_128TO256_UNIT);
+ }
+ /* rate must be over 256 */
+ return ((bkt_max * RATE_OVER256_UNIT) - RATE_OVER256_UNIT);
+}
+
+/*****
+ * NAME
+ * sse2_pol_get_bkt_value
+ *
+ * PARAMETERS
+ * rate_hw - either the averate rate or peak rate
+ * byte_value - bytes for this token bucket
+ *
+ * RETURNS
+ * u64 - unit value for the current or extended bucket field
+ *
+ * DESCRIPTION
+ * The current bucket or extended bucket fields are in units of either
+ * 1,2,4,8 bytes based on the average or peak rate respective to current
+ * or extended bucket.
+ *
+ * To get the units that can be stored in the field, the byte value must
+ * be divided by the units of either 1,2,4,8 bytes based on the rate.
+ *****/
+u64
+sse2_pol_get_bkt_value (u64 rate_hw, u64 byte_value)
+{
+ if (rate_hw <= RATE64)
+ {
+ return (byte_value);
+ }
+ else if (rate_hw <= RATE128)
+ {
+ return (byte_value / RATE_64TO128_UNIT);
+ }
+ else if (rate_hw <= RATE256)
+ {
+ return (byte_value / RATE_128TO256_UNIT);
+ }
+ /* rate must be over 256 */
+ return (byte_value / RATE_OVER256_UNIT);
+}
+
+static void
+sse2_pol_rnd_burst_byte_fmt (u64 cfg_burst,
+ u16 max_exp_value,
+ u16 max_mant_value,
+ u32 max_bkt_value,
+ u32 rate_hw,
+ u8 * exp, u32 * mant, u32 * bkt_value)
+{
+ u64 bkt_max = max_bkt_value;
+ u64 bkt_limit_max;
+ u64 rnd_burst;
+ u64 temp_bkt_value;
+
+ bkt_limit_max = ((u64) max_mant_value << (u64) max_exp_value);
+ bkt_max = sse2_pol_get_bkt_max (rate_hw, bkt_max);
+ bkt_max = MIN (bkt_max, bkt_limit_max);
+ if (!cfg_burst)
+ {
+ /*
+ * If configured burst = 0, compute the burst to be 100ms at a given
+ * rate. Note that for rate_hw = 0, exp = mant = 0.
+ */
+ cfg_burst = (u64) rate_hw *(u64) SSE2_QOS_POL_DEF_BURST_BYTE;
+ }
+
+ if (cfg_burst > bkt_max)
+ {
+ SSE2_QOS_DEBUG_ERROR ("burst 0x%llx bytes is greater than the max. "
+ "supported value 0x%llx bytes. Capping it to the "
+ "max", cfg_burst, bkt_max);
+ SSE2_QOS_TR_INFO (SSE2_QOS_TP_INFO_38,
+ (uint) cfg_burst, (uint) bkt_max);
+ cfg_burst = bkt_max;
+ }
+
+ if (cfg_burst < SSE2_QOS_POL_MIN_BURST_BYTE)
+ {
+ /*
+ * Bump up the burst value ONLY if the cfg_burst is non-zero AND
+ * less than the min. supported value
+ */
+ SSE2_QOS_DEBUG_INFO ("burst 0x%llx bytes is less than the min "
+ "supported value %u bytes. Rounding it up to "
+ "the min", cfg_burst, SSE2_QOS_POL_MIN_BURST_BYTE);
+ SSE2_QOS_TR_INFO (SSE2_QOS_TP_INFO_39, (uint) cfg_burst,
+ SSE2_QOS_POL_MIN_BURST_BYTE);
+ cfg_burst = SSE2_QOS_POL_MIN_BURST_BYTE;
+ }
+
+ sse2_qos_convert_value_to_exp_mant_fmt (cfg_burst,
+ max_exp_value,
+ max_mant_value,
+ SSE2_QOS_ROUND_TO_DOWN, exp, mant);
+
+ /* Bucket value is based on rate. */
+ rnd_burst = ((u64) (*mant) << (u64) (*exp));
+ temp_bkt_value = sse2_pol_get_bkt_value (rate_hw, rnd_burst);
+ *bkt_value = (u32) temp_bkt_value;
+}
+
+static int
+sse2_pol_convert_cfg_burst_to_hw (sse2_qos_pol_cfg_params_st * cfg,
+ sse2_qos_pol_hw_params_st * hw)
+{
+ u8 temp_exp;
+ u32 temp_mant, rate_hw;
+ u64 eb_bytes;
+ u32 bkt_value;
+
+ /*
+ * compute Committed Burst
+ */
+ SSE2_QOS_DEBUG_INFO ("Compute commit burst ...");
+ rate_hw = (hw->avg_rate_man) << (hw->rate_exp);
+ sse2_pol_rnd_burst_byte_fmt (cfg->rb.kbps.cb_bytes,
+ (u16) SSE2_QOS_POL_COMM_BKT_LIMIT_EXP_MAX,
+ (u16) SSE2_QOS_POL_COMM_BKT_LIMIT_MANT_MAX,
+ (u32) SSE2_QOS_POL_COMM_BKT_MAX,
+ rate_hw, &temp_exp, &temp_mant, &bkt_value);
+ SSE2_QOS_DEBUG_INFO ("Committed burst, burst_limit: 0x%llx mant : %u, "
+ "exp: %u, rnded: 0x%llx cb:%u bytes",
+ cfg->rb.kbps.cb_bytes, temp_mant, temp_exp,
+ ((u64) temp_mant << (u64) temp_exp), bkt_value);
+
+ hw->comm_bkt_limit_exp = temp_exp;
+ hw->comm_bkt_limit_man = (u8) temp_mant;
+ hw->comm_bkt = bkt_value;
+
+ /*
+ * compute Exceed Burst
+ */
+ SSE2_QOS_DEBUG_INFO ("Compute exceed burst ...");
+
+ if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C)
+ {
+ /*
+ * For 1R2C, hw uses 2R3C (RFC-4115). As such, the Exceed Bucket
+ * params are set to 0. Recommendation is to use EB_exp = max_exp (=15)
+ * and EB_mant = 0
+ */
+ hw->extd_bkt_limit_exp = (u8) SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_MAX;
+ hw->extd_bkt_limit_man = 0;
+ SSE2_QOS_DEBUG_INFO ("Excess burst, burst: 0x%llx mant: %u, "
+ "exp: %u, rnded: 0x%llx bytes",
+ cfg->rb.kbps.eb_bytes, hw->extd_bkt_limit_man,
+ hw->extd_bkt_limit_exp,
+ ((u64) hw->extd_bkt_limit_man <<
+ (u64) hw->extd_bkt_limit_exp));
+ SSE2_QOS_TR_INFO (SSE2_QOS_TP_INFO_20, (uint) cfg->rb.kbps.eb_bytes,
+ hw->extd_bkt_limit_man, hw->extd_bkt_limit_exp);
+ return (0);
+ }
+
+ if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697)
+ {
+ eb_bytes = cfg->rb.kbps.cb_bytes + cfg->rb.kbps.eb_bytes;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115)
+ {
+ eb_bytes = cfg->rb.kbps.eb_bytes - cfg->rb.kbps.cb_bytes;
+ }
+ else
+ {
+ eb_bytes = cfg->rb.kbps.eb_bytes;
+ }
+
+ rate_hw = (hw->peak_rate_man) << (hw->rate_exp);
+ sse2_pol_rnd_burst_byte_fmt (eb_bytes,
+ (u16) SSE2_QOS_POL_EXTD_BKT_LIMIT_EXP_MAX,
+ (u16) SSE2_QOS_POL_EXTD_BKT_LIMIT_MANT_MAX,
+ (u32) SSE2_QOS_POL_EXTD_BKT_MAX,
+ rate_hw, &temp_exp, &temp_mant, &bkt_value);
+
+ SSE2_QOS_DEBUG_INFO ("Excess burst, burst_limit: 0x%llx mant: %u, "
+ "exp: %u, rnded: 0x%llx eb:%u bytes",
+ cfg->rb.kbps.eb_bytes, temp_mant, temp_exp,
+ ((u64) temp_mant << (u64) temp_exp), bkt_value);
+
+ hw->extd_bkt_limit_exp = (u8) temp_exp;
+ hw->extd_bkt_limit_man = (u8) temp_mant;
+ hw->extd_bkt = bkt_value;
+
+ return (0);
+}
+
+
+/*
+ * Input: configured parameter values in 'cfg'.
+ * Output: h/w programmable parameter values in 'hw'.
+ * Return: success or failure code.
+ */
+static int
+sse2_pol_convert_cfg_to_hw_params (sse2_qos_pol_cfg_params_st * cfg,
+ sse2_qos_pol_hw_params_st * hw)
+{
+ int rc = 0;
+
+ /*
+ * clear the hw_params
+ */
+ memset (hw, 0, sizeof (sse2_qos_pol_hw_params_st));
+
+ hw->allow_negative = SSE2_QOS_POL_ALLOW_NEGATIVE;
+
+ if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C) ||
+ (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115))
+ {
+ hw->rfc = IPE_RFC_RFC4115;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697)
+ {
+ hw->rfc = IPE_RFC_RFC2697;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698)
+ {
+ hw->rfc = IPE_RFC_RFC2698;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_MEF5CF1)
+ {
+ hw->rfc = IPE_RFC_MEF5CF1;
+ }
+ else
+ {
+ SSE2_QOS_DEBUG_ERROR ("Invalid RFC type %d\n", cfg->rfc);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_61, cfg->rfc);
+ return (EINVAL);
+ }
+
+ rc = sse2_pol_convert_cfg_rates_to_hw (cfg, hw);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert config rates to hw. Error: %d",
+ rc);
+ // Error is traced
+ return (rc);
+ }
+
+ rc = sse2_pol_convert_cfg_burst_to_hw (cfg, hw);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert config burst to hw. Error: %d",
+ rc);
+ // Error is traced
+ return (rc);
+ }
+
+ return 0;
+}
+
+
+u32
+sse2_qos_convert_pps_to_kbps (u32 rate_pps)
+{
+ // sse2_qos_ship_inc_counter(SSE2_QOS_SHIP_COUNTER_TYPE_API_CNT,
+ // SSE2_QOS_SHIP_CNT_POL_CONV_PPS_TO_KBPS);
+
+ u64 numer, rnd_value = 0;
+
+ numer = (u64) ((u64) rate_pps *
+ (u64) SSE2_QOS_POLICER_FIXED_PKT_SIZE * 8LL);
+ (void) sse2_qos_pol_round (numer, 1000LL, &rnd_value,
+ SSE2_QOS_ROUND_TO_CLOSEST);
+
+ return ((u32) rnd_value);
+}
+
+u32
+sse2_qos_convert_burst_ms_to_bytes (u32 burst_ms, u32 rate_kbps)
+{
+ u64 numer, rnd_value = 0;
+
+ //sse2_qos_ship_inc_counter(SSE2_QOS_SHIP_COUNTER_TYPE_API_CNT,
+ // SSE2_QOS_SHIP_CNT_POL_CONV_BURST_MS_TO_BYTES);
+
+ numer = (u64) ((u64) burst_ms * (u64) rate_kbps);
+
+ (void) sse2_qos_pol_round (numer, 8LL, &rnd_value,
+ SSE2_QOS_ROUND_TO_CLOSEST);
+
+ return ((u32) rnd_value);
+}
+
+
+/*
+ * Input: configured parameters in 'cfg'.
+ * Output: h/w parameters are returned in 'hw',
+ * Return: Status, success or failure code.
+ */
+int
+sse2_pol_compute_hw_params (sse2_qos_pol_cfg_params_st * cfg,
+ sse2_qos_pol_hw_params_st * hw)
+{
+ int rc = 0;
+
+ if (!cfg || !hw)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Illegal parameters");
+ return (-1);
+ }
+
+ /*
+ * Validate the police config params being presented to RM
+ */
+ rc = sse2_pol_validate_cfg_params (cfg);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Config parameter validation failed. Error: %d",
+ rc);
+ // Error is traced
+ return (-1);
+ }
+
+ /*
+ * first round configured values to h/w supported values. This func
+ * also determines whether 'tick' or 'byte' format
+ */
+ rc = sse2_pol_convert_cfg_to_hw_params (cfg, hw);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert config params to hw params. "
+ "Error: %d", rc);
+ SSE2_QOS_TR_ERR (SSE2_QOS_TP_ERR_53, rc);
+ return (-1);
+ }
+
+ return 0;
+}
+
+
+#if defined (INTERNAL_SS) || defined (X86)
+
+// For initializing the x86 policer format
+
+/*
+ * Return the number of hardware TSC timer ticks per second for the dataplane.
+ * This is approximately, but not exactly, the clock speed.
+ */
+static u64
+get_tsc_hz (void)
+{
+ f64 cpu_freq;
+
+ cpu_freq = os_cpu_clock_frequency ();
+ return (u64) cpu_freq;
+}
+
+/*
+ * Convert rates into bytes_per_period and scale.
+ * Return 0 if ok or 1 if error.
+ */
+static int
+compute_policer_params (u64 hz, // CPU speed in clocks per second
+ u64 cir_rate, // in bytes per second
+ u64 pir_rate, // in bytes per second
+ u32 * current_limit, // in bytes, output may scale the input
+ u32 * extended_limit, // in bytes, output may scale the input
+ u32 * cir_bytes_per_period,
+ u32 * pir_bytes_per_period, u32 * scale)
+{
+ double period;
+ double internal_cir_bytes_per_period;
+ double internal_pir_bytes_per_period;
+ u32 max;
+ u32 scale_shift;
+ u32 scale_amount;
+ u32 __attribute__ ((unused)) orig_current_limit = *current_limit;
+
+ // Compute period. For 1Ghz-to-8Ghz CPUs, the period will be in
+ // the range of 16 to 116 usec.
+ period = ((double) hz) / ((double) POLICER_TICKS_PER_PERIOD);
+
+ // Determine bytes per period for each rate
+ internal_cir_bytes_per_period = (double) cir_rate / period;
+ internal_pir_bytes_per_period = (double) pir_rate / period;
+
+ // Scale if possible. Scaling helps rate accuracy, but is contrained
+ // by the scaled rates and limits fitting in 32-bits.
+ // In addition, we need to insure the scaled rate is no larger than
+ // 2^22 tokens per period. This allows the dataplane to ignore overflow
+ // in the tokens-per-period multiplication since it could only
+ // happen if the policer were idle for more than a year.
+ // This is not really a constraint because 100Gbps at 1Ghz is only
+ // 1.6M tokens per period.
+#define MAX_RATE_SHIFT 10
+ max = MAX (*current_limit, *extended_limit);
+ max = MAX (max, (u32) internal_cir_bytes_per_period << MAX_RATE_SHIFT);
+ max = MAX (max, (u32) internal_pir_bytes_per_period << MAX_RATE_SHIFT);
+ scale_shift = __builtin_clz (max);
+
+ scale_amount = 1 << scale_shift;
+ *scale = scale_shift;
+
+ // Scale the limits
+ *current_limit = *current_limit << scale_shift;
+ *extended_limit = *extended_limit << scale_shift;
+
+ // Scale the rates
+ internal_cir_bytes_per_period =
+ internal_cir_bytes_per_period * ((double) scale_amount);
+ internal_pir_bytes_per_period =
+ internal_pir_bytes_per_period * ((double) scale_amount);
+
+ // Make sure the new rates are reasonable
+ // Only needed for very low rates with large bursts
+ if (internal_cir_bytes_per_period < 1.0)
+ {
+ internal_cir_bytes_per_period = 1.0;
+ }
+ if (internal_pir_bytes_per_period < 1.0)
+ {
+ internal_pir_bytes_per_period = 1.0;
+ }
+
+ *cir_bytes_per_period = (u32) internal_cir_bytes_per_period;
+ *pir_bytes_per_period = (u32) internal_pir_bytes_per_period;
+
+// #define PRINT_X86_POLICE_PARAMS
+#ifdef PRINT_X86_POLICE_PARAMS
+ {
+ u64 effective_BPS;
+
+ // This value actually slightly conservative because it doesn't take into account
+ // the partial period at the end of a second. This really matters only for very low
+ // rates.
+ effective_BPS =
+ (((u64) (*cir_bytes_per_period * (u64) period)) >> *scale);
+
+ printf ("hz=%llu, cir_rate=%llu, limit=%u => "
+ "periods-per-sec=%d usec-per-period=%d => "
+ "scale=%d cir_BPP=%u, scaled_limit=%u => "
+ "effective BPS=%llu, accuracy=%f\n",
+ // input values
+ (unsigned long long) hz,
+ (unsigned long long) cir_rate, orig_current_limit,
+ // computed values
+ (u32) (period), // periods per second
+ (u32) (1000.0 * 1000.0 / period), // in usec
+ *scale, *cir_bytes_per_period, *current_limit,
+ // accuracy
+ (unsigned long long) effective_BPS,
+ (double) cir_rate / (double) effective_BPS);
+ }
+#endif
+
+ return 0; // ok
+}
+
+
+/*
+ * Input: configured parameters in 'cfg'.
+ * Output: h/w parameters are returned in 'hw',
+ * Return: Status, success or failure code.
+ */
+int
+x86_pol_compute_hw_params (sse2_qos_pol_cfg_params_st * cfg,
+ policer_read_response_type_st * hw)
+{
+ const int BYTES_PER_KBIT = (1000 / 8);
+ u64 hz;
+ u32 cap;
+
+ if (!cfg || !hw)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Illegal parameters");
+ return (-1);
+ }
+
+ hz = get_tsc_hz ();
+ hw->last_update_time = 0;
+
+ // Cap the bursts to 32-bits. This allows up to almost one second of
+ // burst on a 40GE interface, which should be fine for x86.
+ cap =
+ (cfg->rb.kbps.cb_bytes > 0xFFFFFFFF) ? 0xFFFFFFFF : cfg->rb.kbps.cb_bytes;
+ hw->current_limit = cap;
+ cap =
+ (cfg->rb.kbps.eb_bytes > 0xFFFFFFFF) ? 0xFFFFFFFF : cfg->rb.kbps.eb_bytes;
+ hw->extended_limit = cap;
+
+ if ((cfg->rb.kbps.cir_kbps == 0) && (cfg->rb.kbps.cb_bytes == 0)
+ && (cfg->rb.kbps.eb_bytes == 0))
+ {
+ // This is a uninitialized, always-violate policer
+ hw->single_rate = 1;
+ hw->cir_tokens_per_period = 0;
+ return 0;
+ }
+
+ if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C) ||
+ (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697))
+ {
+ // Single-rate policer
+
+ hw->single_rate = 1;
+
+ if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_1R2C) && cfg->rb.kbps.eb_bytes)
+ {
+ SSE2_QOS_DEBUG_ERROR
+ ("Policer parameter validation failed -- 1R2C.");
+ return (-1);
+ }
+
+ if ((cfg->rb.kbps.cir_kbps == 0) ||
+ (cfg->rb.kbps.eir_kbps != 0) ||
+ ((cfg->rb.kbps.cb_bytes == 0) && (cfg->rb.kbps.eb_bytes == 0)))
+ {
+ SSE2_QOS_DEBUG_ERROR ("Policer parameter validation failed -- 1R.");
+ return (-1);
+ }
+
+ if (compute_policer_params (hz,
+ (u64) cfg->rb.kbps.cir_kbps *
+ BYTES_PER_KBIT, 0, &hw->current_limit,
+ &hw->extended_limit,
+ &hw->cir_tokens_per_period,
+ &hw->pir_tokens_per_period, &hw->scale))
+ {
+ SSE2_QOS_DEBUG_ERROR ("Policer parameter computation failed.");
+ return (-1);
+ }
+
+ }
+ else if ((cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698) ||
+ (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115))
+ {
+ // Two-rate policer
+
+ if ((cfg->rb.kbps.cir_kbps == 0) || (cfg->rb.kbps.eir_kbps == 0)
+ || (cfg->rb.kbps.eir_kbps < cfg->rb.kbps.cir_kbps)
+ || (cfg->rb.kbps.cb_bytes == 0) || (cfg->rb.kbps.eb_bytes == 0))
+ {
+ SSE2_QOS_DEBUG_ERROR ("Config parameter validation failed.");
+ return (-1);
+ }
+
+ if (compute_policer_params (hz,
+ (u64) cfg->rb.kbps.cir_kbps *
+ BYTES_PER_KBIT,
+ (u64) cfg->rb.kbps.eir_kbps *
+ BYTES_PER_KBIT, &hw->current_limit,
+ &hw->extended_limit,
+ &hw->cir_tokens_per_period,
+ &hw->pir_tokens_per_period, &hw->scale))
+ {
+ SSE2_QOS_DEBUG_ERROR ("Policer parameter computation failed.");
+ return (-1);
+ }
+
+ }
+ else
+ {
+ SSE2_QOS_DEBUG_ERROR
+ ("Config parameter validation failed. RFC not supported");
+ return (-1);
+ }
+
+ hw->current_bucket = hw->current_limit;
+ hw->extended_bucket = hw->extended_limit;
+
+ return 0;
+}
+#endif
+
+
+/*
+ * Input: configured parameters in 'cfg'.
+ * Output: physical structure is returned in 'phys',
+ * Return: Status, success or failure code.
+ */
+int
+sse2_pol_logical_2_physical (sse2_qos_pol_cfg_params_st * cfg,
+ policer_read_response_type_st * phys)
+{
+ int rc;
+ sse2_qos_pol_hw_params_st pol_hw;
+ sse2_qos_pol_cfg_params_st kbps_cfg;
+
+ memset (phys, 0, sizeof (policer_read_response_type_st));
+ memset (&kbps_cfg, 0, sizeof (sse2_qos_pol_cfg_params_st));
+
+ if (!cfg)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Illegal parameters");
+ return (-1);
+ }
+
+ switch (cfg->rate_type)
+ {
+ case SSE2_QOS_RATE_KBPS:
+ /* copy all the data into kbps_cfg */
+ kbps_cfg.rb.kbps.cir_kbps = cfg->rb.kbps.cir_kbps;
+ kbps_cfg.rb.kbps.eir_kbps = cfg->rb.kbps.eir_kbps;
+ kbps_cfg.rb.kbps.cb_bytes = cfg->rb.kbps.cb_bytes;
+ kbps_cfg.rb.kbps.eb_bytes = cfg->rb.kbps.eb_bytes;
+ break;
+ case SSE2_QOS_RATE_PPS:
+ kbps_cfg.rb.kbps.cir_kbps =
+ sse2_qos_convert_pps_to_kbps (cfg->rb.pps.cir_pps);
+ kbps_cfg.rb.kbps.eir_kbps =
+ sse2_qos_convert_pps_to_kbps (cfg->rb.pps.eir_pps);
+ kbps_cfg.rb.kbps.cb_bytes = sse2_qos_convert_burst_ms_to_bytes ((u32)
+ cfg->
+ rb.pps.cb_ms,
+ kbps_cfg.rb.
+ kbps.cir_kbps);
+ kbps_cfg.rb.kbps.eb_bytes =
+ sse2_qos_convert_burst_ms_to_bytes ((u32) cfg->rb.pps.eb_ms,
+ kbps_cfg.rb.kbps.eir_kbps);
+ break;
+ default:
+ SSE2_QOS_DEBUG_ERROR ("Illegal rate type");
+ return (-1);
+ }
+
+ /* rate type is now converted to kbps */
+ kbps_cfg.rate_type = SSE2_QOS_RATE_KBPS;
+ kbps_cfg.rnd_type = cfg->rnd_type;
+ kbps_cfg.rfc = cfg->rfc;
+
+ phys->action[POLICE_CONFORM] = cfg->conform_action.action_type;
+ phys->mark_dscp[POLICE_CONFORM] = cfg->conform_action.dscp;
+ phys->action[POLICE_EXCEED] = cfg->exceed_action.action_type;
+ phys->mark_dscp[POLICE_EXCEED] = cfg->exceed_action.dscp;
+ phys->action[POLICE_VIOLATE] = cfg->violate_action.action_type;
+ phys->mark_dscp[POLICE_VIOLATE] = cfg->violate_action.dscp;
+
+ phys->color_aware = cfg->color_aware;
+
+#if !defined (INTERNAL_SS) && !defined (X86)
+ // convert logical into hw params which involves qos calculations
+ rc = sse2_pol_compute_hw_params (&kbps_cfg, &pol_hw);
+ if (rc == -1)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to compute hw param. Error: %d", rc);
+ return (rc);
+ }
+
+ // convert hw params into the physical
+ phys->rfc = pol_hw.rfc;
+ phys->an = pol_hw.allow_negative;
+ phys->rexp = pol_hw.rate_exp;
+ phys->arm = pol_hw.avg_rate_man;
+ phys->prm = pol_hw.peak_rate_man;
+ phys->cble = pol_hw.comm_bkt_limit_exp;
+ phys->cblm = pol_hw.comm_bkt_limit_man;
+ phys->eble = pol_hw.extd_bkt_limit_exp;
+ phys->eblm = pol_hw.extd_bkt_limit_man;
+ phys->cb = pol_hw.comm_bkt;
+ phys->eb = pol_hw.extd_bkt;
+
+ /* for debugging purposes, the bucket token values can be overwritten */
+ if (cfg->overwrite_bucket)
+ {
+ phys->cb = cfg->current_bucket;
+ phys->eb = cfg->extended_bucket;
+ }
+#else
+ // convert logical into hw params which involves qos calculations
+ rc = x86_pol_compute_hw_params (&kbps_cfg, phys);
+ if (rc == -1)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to compute hw param. Error: %d", rc);
+ return (rc);
+ }
+
+ /* for debugging purposes, the bucket token values can be overwritten */
+ if (cfg->overwrite_bucket)
+ {
+ phys->current_bucket = cfg->current_bucket;
+ phys->extended_bucket = cfg->extended_bucket;
+ }
+
+ // Touch to avoid compiler warning for X86
+ pol_hw.allow_negative = pol_hw.allow_negative;
+
+#endif // if !defined (INTERNAL_SS) && !defined (X86)
+
+ return 0;
+}
+
+
+static void
+sse2_qos_convert_pol_bucket_to_hw_fmt (policer_read_response_type_st * bkt,
+ sse2_qos_pol_hw_params_st * hw_fmt)
+{
+ memset (hw_fmt, 0, sizeof (sse2_qos_pol_hw_params_st));
+#if !defined (INTERNAL_SS) && !defined (X86)
+ hw_fmt->rfc = (u8) bkt->rfc;
+ hw_fmt->allow_negative = (u8) bkt->an;
+ hw_fmt->rate_exp = (u8) bkt->rexp;
+ hw_fmt->avg_rate_man = (u16) bkt->arm;
+ hw_fmt->peak_rate_man = (u16) bkt->prm;
+ hw_fmt->comm_bkt_limit_man = (u8) bkt->cblm;
+ hw_fmt->comm_bkt_limit_exp = (u8) bkt->cble;
+ hw_fmt->extd_bkt_limit_man = (u8) bkt->eblm;
+ hw_fmt->extd_bkt_limit_exp = (u8) bkt->eble;
+ hw_fmt->extd_bkt = bkt->eb;
+ hw_fmt->comm_bkt = bkt->cb;
+#endif // if !defined (INTERNAL_SS) && !defined (X86)
+}
+
+/*
+ * Input: h/w programmable parameter values in 'hw'
+ * Output: configured parameter values in 'cfg'
+ * Return: Status, success or failure code.
+ */
+static int
+sse2_pol_convert_hw_to_cfg_params (sse2_qos_pol_hw_params_st * hw,
+ sse2_qos_pol_cfg_params_st * cfg)
+{
+ u64 temp_rate;
+
+ if ((hw == NULL) || (cfg == NULL))
+ {
+ return EINVAL;
+ }
+
+ if ((hw->rfc == IPE_RFC_RFC4115) &&
+ !(hw->peak_rate_man << hw->rate_exp) && !(hw->extd_bkt_limit_man))
+ {
+ /*
+ * For a 1R2C, we set EIR = 0, EB = 0
+ */
+ cfg->rfc = SSE2_QOS_POLICER_TYPE_1R2C;
+ }
+ else if (hw->rfc == IPE_RFC_RFC2697)
+ {
+ cfg->rfc = SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697;
+ }
+ else if (hw->rfc == IPE_RFC_RFC2698)
+ {
+ cfg->rfc = SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698;
+ }
+ else if (hw->rfc == IPE_RFC_RFC4115)
+ {
+ cfg->rfc = SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115;
+ }
+ else if (hw->rfc == IPE_RFC_MEF5CF1)
+ {
+ cfg->rfc = SSE2_QOS_POLICER_TYPE_2R3C_RFC_MEF5CF1;
+ }
+ else
+ {
+ return EINVAL;
+ }
+
+ temp_rate = (((u64) hw->avg_rate_man << hw->rate_exp) * 8LL *
+ SSE2_QOS_POL_TICKS_PER_SEC) / 1000;
+ cfg->rb.kbps.cir_kbps = (u32) temp_rate;
+
+ temp_rate = (((u64) hw->peak_rate_man << hw->rate_exp) * 8LL *
+ SSE2_QOS_POL_TICKS_PER_SEC) / 1000;
+ cfg->rb.kbps.eir_kbps = (u32) temp_rate;
+
+ cfg->rb.kbps.cb_bytes = ((u64) hw->comm_bkt_limit_man <<
+ (u64) hw->comm_bkt_limit_exp);
+ cfg->rb.kbps.eb_bytes = ((u64) hw->extd_bkt_limit_man <<
+ (u64) hw->extd_bkt_limit_exp);
+
+ if (cfg->rfc == SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697)
+ {
+ /*
+ * For 1R3C in the hardware, EB = sum(CB, EB). Also, EIR = CIR. Restore
+ * values such that the configured params don't reflect this adjustment
+ */
+ cfg->rb.kbps.eb_bytes = (cfg->rb.kbps.eb_bytes - cfg->rb.kbps.cb_bytes);
+ cfg->rb.kbps.eir_kbps = 0;
+ }
+ else if (cfg->rfc == SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115)
+ {
+ /*
+ * For 4115 in the hardware is excess rate and burst, but EA provides
+ * peak-rate, so adjust it to be eir
+ */
+ cfg->rb.kbps.eir_kbps += cfg->rb.kbps.cir_kbps;
+ cfg->rb.kbps.eb_bytes += cfg->rb.kbps.cb_bytes;
+ }
+ /* h/w conversion to cfg is in kbps */
+ cfg->rate_type = SSE2_QOS_RATE_KBPS;
+ cfg->overwrite_bucket = 0;
+ cfg->current_bucket = hw->comm_bkt;
+ cfg->extended_bucket = hw->extd_bkt;
+
+ SSE2_QOS_DEBUG_INFO ("configured params, cir: %u kbps, eir: %u kbps, cb "
+ "burst: 0x%llx bytes, eb burst: 0x%llx bytes",
+ cfg->rb.kbps.cir_kbps, cfg->rb.kbps.eir_kbps,
+ cfg->rb.kbps.cb_bytes, cfg->rb.kbps.eb_bytes);
+ SSE2_QOS_TR_INFO (SSE2_QOS_TP_INFO_22, cfg->rb.kbps.cir_kbps,
+ cfg->rb.kbps.eir_kbps,
+ (uint) cfg->rb.kbps.cb_bytes,
+ (uint) cfg->rb.kbps.eb_bytes);
+
+ return 0;
+}
+
+u32
+sse2_qos_convert_kbps_to_pps (u32 rate_kbps)
+{
+ u64 numer, denom, rnd_value = 0;
+
+ // sse_qosrm_ship_inc_counter(SSE2_QOS_SHIP_COUNTER_TYPE_API_CNT,
+ // SSE2_QOS_SHIP_CNT_POL_CONV_KBPS_TO_PPS);
+
+ numer = (u64) ((u64) rate_kbps * 1000LL);
+ denom = (u64) ((u64) SSE2_QOS_POLICER_FIXED_PKT_SIZE * 8LL);
+
+ (void) sse2_qos_pol_round (numer, denom, &rnd_value,
+ SSE2_QOS_ROUND_TO_CLOSEST);
+
+ return ((u32) rnd_value);
+}
+
+u32
+sse2_qos_convert_burst_bytes_to_ms (u64 burst_bytes, u32 rate_kbps)
+{
+ u64 numer, denom, rnd_value = 0;
+
+ //sse_qosrm_ship_inc_counter(SSE2_QOS_SHIP_COUNTER_TYPE_API_CNT,
+ // SSE2_QOS_SHIP_CNT_POL_CONV_BYTES_TO_BURST_MS);
+
+ numer = burst_bytes * 8LL;
+ denom = (u64) rate_kbps;
+
+ (void) sse2_qos_pol_round (numer, denom, &rnd_value,
+ SSE2_QOS_ROUND_TO_CLOSEST);
+
+ return ((u32) rnd_value);
+}
+
+/*
+ * Input: physical structure in 'phys', rate_type in cfg
+ * Output: configured parameters in 'cfg'.
+ * Return: Status, success or failure code.
+ */
+int
+sse2_pol_physical_2_logical (policer_read_response_type_st * phys,
+ sse2_qos_pol_cfg_params_st * cfg)
+{
+ int rc;
+ sse2_qos_pol_hw_params_st pol_hw;
+ sse2_qos_pol_cfg_params_st kbps_cfg;
+
+ memset (&pol_hw, 0, sizeof (sse2_qos_pol_hw_params_st));
+ memset (&kbps_cfg, 0, sizeof (sse2_qos_pol_cfg_params_st));
+
+ if (!phys)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Illegal parameters");
+ return (-1);
+ }
+
+ sse2_qos_convert_pol_bucket_to_hw_fmt (phys, &pol_hw);
+
+ rc = sse2_pol_convert_hw_to_cfg_params (&pol_hw, &kbps_cfg);
+ if (rc != 0)
+ {
+ SSE2_QOS_DEBUG_ERROR ("Unable to convert hw params to config params. "
+ "Error: %d", rc);
+ return (-1);
+ }
+
+ /* check what rate type is required */
+ switch (cfg->rate_type)
+ {
+ case SSE2_QOS_RATE_KBPS:
+ /* copy all the data into kbps_cfg */
+ cfg->rb.kbps.cir_kbps = kbps_cfg.rb.kbps.cir_kbps;
+ cfg->rb.kbps.eir_kbps = kbps_cfg.rb.kbps.eir_kbps;
+ cfg->rb.kbps.cb_bytes = kbps_cfg.rb.kbps.cb_bytes;
+ cfg->rb.kbps.eb_bytes = kbps_cfg.rb.kbps.eb_bytes;
+ break;
+ case SSE2_QOS_RATE_PPS:
+ cfg->rb.pps.cir_pps =
+ sse2_qos_convert_kbps_to_pps (kbps_cfg.rb.kbps.cir_kbps);
+ cfg->rb.pps.eir_pps =
+ sse2_qos_convert_kbps_to_pps (kbps_cfg.rb.kbps.eir_kbps);
+ cfg->rb.pps.cb_ms =
+ sse2_qos_convert_burst_bytes_to_ms (kbps_cfg.rb.kbps.cb_bytes,
+ kbps_cfg.rb.kbps.cir_kbps);
+ cfg->rb.pps.eb_ms =
+ sse2_qos_convert_burst_bytes_to_ms (kbps_cfg.rb.kbps.eb_bytes,
+ kbps_cfg.rb.kbps.eir_kbps);
+ break;
+ default:
+ SSE2_QOS_DEBUG_ERROR ("Illegal rate type");
+ return (-1);
+ }
+
+ /* cfg->rate_type remains what it was */
+ cfg->rnd_type = kbps_cfg.rnd_type;
+ cfg->rfc = kbps_cfg.rfc;
+ cfg->overwrite_bucket = kbps_cfg.overwrite_bucket;
+ cfg->current_bucket = kbps_cfg.current_bucket;
+ cfg->extended_bucket = kbps_cfg.extended_bucket;
+
+ return 0;
+}
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */