aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/dhcp/client.h
AgeCommit message (Collapse)AuthorFilesLines
2019-10-07dhcp: Move to pluginNeale Ranns1-179/+0
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns1-1/+5
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-26dhcp: send unicast and broadcast packets via the IP adjacencyNeale Ranns1-2/+5
Type: feature this means DHCP packets are subject to the IP features configured on the interface - the unicast packets already were sent throught the adj - added UT for DHCP client sending a unicast renewal Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-06Fix VPP-1487 DHCP client does not support option 6-domain serverjackiechen19851-0/+1
Change-Id: I36ad1ef2a53af3d3f3a6348bc189b17e9e4e21bd Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2018-06-07DHCP Client DumpNeale Ranns1-10/+41
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps - add the DHCP client dump API - update VOM to refelct API changes - rename VOM class dhcp_config* dhcp_client* - the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-27VPP-1294: add missing feature arc constraintDave Barach1-1/+1
the ip4-dhcp-client-detect feature MUST run prior to nat44-out2in, or inbound dhcp broadcast packets will be dropped. Certain dhcp servers answer lease renewal dhcp-request packets with broadcast dhcp-acks, leading to unrecoverable lease loss. In detail, this constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa"), }; doesn't get the job done: ip4-unicast: [17] nat44-out2in [23] ip4-dhcp-client-detect [26] ip4-not-enabled Add a proper constraint: VNET_FEATURE_INIT (ip4_snat_out2in, static) = { .arc_name = "ip4-unicast", .node_name = "nat44-out2in", .runs_after = VNET_FEATURES ("acl-plugin-in-ip4-fa", "ip4-dhcp-client-detect"), }; and the interface feature order is OK, at least in this regard: ip4-unicast: [17] ip4-dhcp-client-detect [18] nat44-out2in [26] ip4-not-enabled We need to carefully audit (especially) the ip4-unicast feature arc, which has [gasp] 37 features on it! Change-Id: I5e749ead7ab2a25d80839a331de6261e112977ad Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach1-0/+3
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-01-23For DHCP client configuration control the setting of the broadcast flag in theNeale Ranns1-1/+7
DISCOVER message sent. According to RFC2131: In the case of a client using DHCP for initial configuration (before the client's TCP/IP software has been completely configured), DHCP requires creative use of the client's TCP/IP software and liberal interpretation of RFC 1122. The TCP/IP software SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured; DHCP servers and BOOTP relay agents may not be able to deliver DHCP messages to clients that cannot accept hardware unicast datagrams before the TCP/IP software is configured. To work around some clients that cannot accept IP unicast datagrams before the TCP/IP software is configured as discussed in the previous paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is defined as the BROADCAST (B) flag. The semantics of this flag are discussed in section 4.1 of this document. The remaining bits of the flags field are reserved for future use. They MUST be set to zero by clients and ignored by servers and relay agents. Figure 2 gives the format of the 'flags' field. this changes means VPP conforms to the: "SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured" with the caveat that VPP allows DHCP packets destined to the stanard client DHCP port to be delivered. With this enhancement the control-plane is now able to choose the setting of the broadcast flag. Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-09VPP-249 Coding standards cleanup - vnet/vnet/dhcpkhemendra kumar1-34/+43
Change-Id: I45a166b5780675d2bc6fe90595f413725704eaa8 Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-1/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns1-0/+1
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns1-1/+1
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns1-0/+3
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+118
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>