aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_abf.py
AgeCommit message (Collapse)AuthorFilesLines
9 daysethernet: check destination mac for L3 in ethernet-input nodeSteven Luong1-4/+4
When the NIC does not support mac filter, we rely on ethernet-input node to do the destination mac check, ie, when the interface is in L3, the mac address for the packet must be the mac address of the interface where the packet arrives. This works fine in ethernet-input node when all packets in the frame might have different interfaces, ie, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However, when all packets are having the same interface, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes through the optimized routine eth_input_single_int -> eth_input_process_frame. That is where dmac check has a bug when all packets in the frame are either, ip4, ip6, or mpls without vlan tags. Because without vlan tags, the code handles all packets in fast path and ignores dmac check. With vlan tags, the code goes to slow path where dmac check is handled properly. The fix is to check if we have a bad dmac in the fast path and force the code to go to slow path which will handle dmac check properly. Also do a wholesale correction on all the testcases which do not use the proper dmac when sending L3 packets. Type: fix Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c Signed-off-by: Steven Luong <sluong@cisco.com>
2023-11-03tests: refactor asf framework codeDave Wallace1-6/+2
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-10-03build: add ability to disable some plugins from packaging and testsAndrew Yourtchenko1-0/+7
When custom-packaging the VPP artifacts, it can be useful to exclude some of the core plugins from packaging/testing, for some reasons. A removal of a plugin(s) from the worktree needs to be tracked as a separate change, and thus is tricky from the maintenance point of view. This change adds the ability to "pretend they do not exist" - plugins which are added to the comma-separated environment variable "VPP_EXCLUDED_PLUGINS" will not be added to the build process and not packaged. The tests do not have the 1:1 relationship as plugins, so they might need to be modified separately. This change includes some of these modifications as an example. Type: feature Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: Id31562d00a01ced1acbb4996a633517cbd6f09d8
2023-01-12abf: exclude networks with deny rulesJosh Dorsey1-0/+126
Type: improvement Signed-off-by: Josh Dorsey <jdorsey@netgate.com> Change-Id: Iee43ca9278922fc7396764b88cff1a87bcb28349
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-91/+109
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-05-13tests: move test source to vpp/testDave Wallace1-0/+330
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace1-344/+0
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-06-18fib: fib api updatesNeale Ranns1-32/+9
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-9/+11
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+8
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-29tests: refactor vpp_object.pyPaul Vinciguerra1-6/+0
Move __str__ to super for all subclasses of VppObject Implement __repr__ in VppObject Implement __hash__ and __eq__ Change-Id: Ibd4ea37b84b17f499ab86630fb5b9ed9c8b4b1c2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-12FIB: path parsing, table-id not fib-index (VPP-1586)Neale Ranns1-3/+27
Change-Id: Ib27952935393163eaabf005c69b1cbc2feca2b98 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-01Tests: Remove all wildcard imports.Paul Vinciguerra1-6/+6
They mask dependencies and confuse third party tools. Change-Id: I24ee16bfa0d746a8e8cb99891ba8b20523048b69 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-17ACL based forwardingAndrew Yourtchenko1-0/+338
A poor man's flow switching or policy based rounting. An ACL is used to match packets and is associated with a [set of] forwarding paths that determine how to forward matched packets - collectively this association is a 'policy'. Policies are then 'attached', in a priority order, to an interface when thaey are encountered as an input feature. If a packet matches no policies it is forwarded normally in the IP FIB. This commit is used to test the "ACL-as-a-service" functionality, which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes. Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Ole Troan <ot@cisco.com>