vpp - Vector Packet Processing

Age	Commit message (Expand)	Author	Files	Lines
2019-11-05	misc: Fix python scripts shebang line	Renato Botelho do Couto	1	-1/+1
2019-10-17	tests: python3 changes for span and aclplugin test	snaramre	1	-1/+1
2019-08-20	api: Cleanup APIs interface.api	Jakub Grajciar	1	-1/+1
2019-04-18	GRE: API update	Neale Ranns	1	-4/+8
2019-04-11	Tests: Refactor tearDown show command logging, add lifecycle markers.	Paul Vinciguerra	1	-2/+3
2019-03-29	tests: test/vpp_l2.py fix missing name.	Paul Vinciguerra	1	-2/+1
2019-03-15	Revert "API: Cleanup APIs interface.api"	Ole Trøan	1	-1/+1
2019-03-15	API: Cleanup APIs interface.api	Jakub Grajciar	1	-1/+1
2019-03-11	vpp_papi_provider: Remove more wrapper functions.	Ole Troan	1	-10/+8
2018-03-01	Fix ERSPAN encap to set EN bits in the header and add test case	John Lo	1	-1/+71
2018-02-15	Optimize GRE Tunnel and add support for ERSPAN encap	John Lo	1	-1/+1
2017-10-18	TEST,SPAN:add broadcast+QiniQ tests	Eyal Bari	1	-67/+137
2017-10-17	TEST,SPAN: add rx+tx span test	Eyal Bari	1	-127/+78
2017-07-24	SPAN:add l2 mirror	Eyal Bari	1	-31/+317
2017-01-12	make test: fix typo	Klement Sekera	1	-1/+1
2017-01-11	make test: improve documentation and PEP8 compliance	Klement Sekera	1	-5/+6
2016-12-23	make test: improve handling of packet captures	Klement Sekera	1	-5/+6
2016-12-05	make test: fix missing log/packet messages	Klement Sekera	1	-21/+28
2016-11-15	span: add feature (rx only) (VPP-185)	Pavel Kotucek	1	-0/+186

#!/usr/bin/env python3 import unittest from framework import VppTestCase, VppTestRunner from vpp_ip_route import VppIpRoute, VppRoutePath, FibPathType from vpp_l2 import L2_PORT_TYPE from vpp_sub_interface import L2_VTR_OP, VppDot1QSubint from scapy.packet import Raw from scapy.layers.l2 import Ether, Dot1Q from scapy.layers.inet import IP, UDP from socket import AF_INET, inet_pton NUM_PKTS = 67 class TestDVR(VppTestCase): """ Distributed Virtual Router """ @classmethod def setUpClass(cls): super(TestDVR, cls).setUpClass() @classmethod def tearDownClass(cls): super(TestDVR, cls).tearDownClass() def setUp(self): super(TestDVR, self).setUp() self.create_pg_interfaces(range(4)) self.create_loopback_interfaces(1) for i in self.pg_interfaces: i.admin_up() self.loop0.config_ip4() def tearDown(self): for i in self.pg_interfaces: i.admin_down() self.loop0.unconfig_ip4() super(TestDVR, self).tearDown() def assert_same_mac_addr(self, tx, rx): t_eth = tx[Ether] for p in rx: r_eth = p[Ether] self.assertEqual(t_eth.src, r_eth.src) self.assertEqual(t_eth.dst, r_eth.dst) def assert_has_vlan_tag(self, tag, rx): for p in rx: r_1q = p[Dot1Q] self.assertEqual(tag, r_1q.vlan) def assert_has_no_tag(self, rx): for p in rx: self.assertFalse(p.haslayer(Dot1Q)) def test_dvr(self): """ Distributed Virtual Router """ # # A packet destined to an IP address that is L2 bridged via # a non-tag interface # ip_non_tag_bridged = "10.10.10.10" ip_tag_bridged = "10.10.10.11" any_src_addr = "1.1.1.1" pkt_no_tag = (Ether(src=self.pg0.remote_mac, dst=self.loop0.local_mac) / IP(src=any_src_addr, dst=ip_non_tag_bridged) / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) pkt_tag = (Ether(src=self.pg0.remote_mac, dst=self.loop0.local_mac) / IP(src=any_src_addr, dst=ip_tag_bridged) / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) # # Two sub-interfaces so we can test VLAN tag push/pop # sub_if_on_pg2 = VppDot1QSubint(self, self.pg2, 92) sub_if_on_pg3 = VppDot1QSubint(self, self.pg3, 93) sub_if_on_pg2.admin_up() sub_if_on_pg3.admin_up() # # Put all the interfaces into a new bridge domain # self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg0.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.loop0.sw_if_index, bd_id=1, port_type=L2_PORT_TYPE.BVI) self.vapi.l2_interface_vlan_tag_rewrite( sw_if_index=sub_if_on_pg2.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1, push_dot1q=92) self.vapi.l2_interface_vlan_tag_rewrite( sw_if_index=sub_if_on_pg3.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1, push_dot1q=93) # # Add routes to bridge the traffic via a tagged an nontagged interface # route_no_tag = VppIpRoute( self, ip_non_tag_bridged, 32, [VppRoutePath("0.0.0.0", self.pg1.sw_if_index, type=FibPathType.FIB_PATH_TYPE_DVR)]) route_no_tag.add_vpp_config() # # Inject the packet that arrives and leaves on a non-tagged interface # Since it's 'bridged' expect that the MAC headed is unchanged. # rx = self.send_and_expect(self.pg0, pkt_no_tag * NUM_PKTS, self.pg1) self.assert_same_mac_addr(pkt_no_tag, rx) self.assert_has_no_tag(rx) # # Add routes to bridge the traffic via a tagged interface # route_with_tag = VppIpRoute( self, ip_tag_bridged, 32, [VppRoutePath("0.0.0.0", sub_if_on_pg3.sw_if_index, type=FibPathType.FIB_PATH_TYPE_DVR)]) route_with_tag.add_vpp_config() # # Inject the packet that arrives non-tag and leaves on a tagged # interface # rx = self.send_and_expect(self.pg0, pkt_tag * NUM_PKTS, self.pg3) self.assert_same_mac_addr(pkt_tag, rx) self.assert_has_vlan_tag(93, rx) # # Tag to tag # pkt_tag_to_tag = (Ether(src=self.pg2.remote_mac, dst=self.loop0.local_mac) / Dot1Q(vlan=92) / IP(src=any_src_addr, dst=ip_tag_bridged) / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) rx = self.send_and_expect(self.pg2, pkt_tag_to_tag * NUM_PKTS, self.pg3) self.assert_same_mac_addr(pkt_tag_to_tag, rx) self.assert_has_vlan_tag(93, rx) # # Tag to non-Tag # pkt_tag_to_non_tag = (Ether(src=self.pg2.remote_mac, dst=self.loop0.local_mac) / Dot1Q(vlan=92) / IP(src=any_src_addr, dst=ip_non_tag_bridged) / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) rx = self.send_and_expect(self.pg2, pkt_tag_to_non_tag * NUM_PKTS, self.pg1) self.assert_same_mac_addr(pkt_tag_to_tag, rx) self.assert_has_no_tag(rx) # # Add an output L3 ACL that will block the traffic # rule_1 = ({'is_permit': 0, 'is_ipv6': 0, 'proto': 17, 'srcport_or_icmptype_first': 1234, 'srcport_or_icmptype_last': 1234, 'src_ip_prefix_len': 32, 'src_ip_addr': inet_pton(AF_INET, any_src_addr), 'dstport_or_icmpcode_first': 1234, 'dstport_or_icmpcode_last': 1234, 'dst_ip_prefix_len': 32, 'dst_ip_addr': inet_pton(AF_INET, ip_non_tag_bridged)}) acl = self.vapi.acl_add_replace(acl_index=4294967295, r=[rule_1]) # # Apply the ACL on the output interface # self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index, 0, [acl.acl_index]) # # Send packet's that should match the ACL and be dropped # rx = self.send_and_assert_no_replies(self.pg2, pkt_tag_to_non_tag * NUM_PKTS) # # cleanup # self.vapi.acl_interface_set_acl_list(self.pg1.sw_if_index, 0, []) self.vapi.acl_del(acl.acl_index) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg0.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.loop0.sw_if_index, bd_id=1, port_type=L2_PORT_TYPE.BVI, enable=0) # # Do a FIB dump to make sure the paths are correctly reported as DVR # routes = self.vapi.ip_route_dump(0) for r in routes: if (ip_tag_bridged == str(r.route.prefix.network_address)): self.assertEqual(r.route.paths[0].sw_if_index, sub_if_on_pg3.sw_if_index) self.assertEqual(r.route.paths[0].type, FibPathType.FIB_PATH_TYPE_DVR) if (ip_non_tag_bridged == str(r.route.prefix.network_address)): self.assertEqual(r.route.paths[0].sw_if_index, self.pg1.sw_if_index) self.assertEqual(r.route.paths[0].type, FibPathType.FIB_PATH_TYPE_DVR) # # the explicit route delete is require so it happens before # the sbu-interface delete. subinterface delete is required # because that object type does not use the object registry # route_no_tag.remove_vpp_config() route_with_tag.remove_vpp_config() sub_if_on_pg3.remove_vpp_config() sub_if_on_pg2.remove_vpp_config() def test_l2_emulation(self): """ L2 Emulation """ # # non distinct L3 packets, in the tag/non-tag combos # pkt_no_tag = (Ether(src=self.pg0.remote_mac, dst=self.pg1.remote_mac) / IP(src="2.2.2.2", dst="1.1.1.1") / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) pkt_to_tag = (Ether(src=self.pg0.remote_mac, dst=self.pg2.remote_mac) / IP(src="2.2.2.2", dst="1.1.1.2") / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) pkt_from_tag = (Ether(src=self.pg3.remote_mac, dst=self.pg2.remote_mac) / Dot1Q(vlan=93) / IP(src="2.2.2.2", dst="1.1.1.1") / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) pkt_from_to_tag = (Ether(src=self.pg3.remote_mac, dst=self.pg2.remote_mac) / Dot1Q(vlan=93) / IP(src="2.2.2.2", dst="1.1.1.2") / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) pkt_bcast = (Ether(src=self.pg0.remote_mac, dst="ff:ff:ff:ff:ff:ff") / IP(src="2.2.2.2", dst="255.255.255.255") / UDP(sport=1234, dport=1234) / Raw(b'\xa5' * 100)) # # A couple of sub-interfaces for tags # sub_if_on_pg2 = VppDot1QSubint(self, self.pg2, 92) sub_if_on_pg3 = VppDot1QSubint(self, self.pg3, 93) sub_if_on_pg2.admin_up() sub_if_on_pg3.admin_up() # # Put all the interfaces into a new bridge domain # self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg0.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1) self.vapi.l2_interface_vlan_tag_rewrite( sw_if_index=sub_if_on_pg2.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1, push_dot1q=92) self.vapi.l2_interface_vlan_tag_rewrite( sw_if_index=sub_if_on_pg3.sw_if_index, vtr_op=L2_VTR_OP.L2_POP_1, push_dot1q=93) # # Disable UU flooding, learning and ARP termination. makes this test # easier as unicast packets are dropped if not extracted. # self.vapi.bridge_flags(bd_id=1, is_set=0, flags=(1 << 0) | (1 << 3) | (1 << 4)) # # Add a DVR route to steer traffic at L3 # route_1 = VppIpRoute( self, "1.1.1.1", 32, [VppRoutePath("0.0.0.0", self.pg1.sw_if_index, type=FibPathType.FIB_PATH_TYPE_DVR)]) route_2 = VppIpRoute( self, "1.1.1.2", 32, [VppRoutePath("0.0.0.0", sub_if_on_pg2.sw_if_index, type=FibPathType.FIB_PATH_TYPE_DVR)]) route_1.add_vpp_config() route_2.add_vpp_config() # # packets are dropped because bridge does not flood unknown unicast # self.send_and_assert_no_replies(self.pg0, pkt_no_tag) # # Enable L3 extraction on pgs # self.vapi.l2_emulation(self.pg0.sw_if_index) self.vapi.l2_emulation(self.pg1.sw_if_index) self.vapi.l2_emulation(sub_if_on_pg2.sw_if_index) self.vapi.l2_emulation(sub_if_on_pg3.sw_if_index) # # now we expect the packet forward according to the DVR route # rx = self.send_and_expect(self.pg0, pkt_no_tag * NUM_PKTS, self.pg1) self.assert_same_mac_addr(pkt_no_tag, rx) self.assert_has_no_tag(rx) rx = self.send_and_expect(self.pg0, pkt_to_tag * NUM_PKTS, self.pg2) self.assert_same_mac_addr(pkt_to_tag, rx) self.assert_has_vlan_tag(92, rx) rx = self.send_and_expect(self.pg3, pkt_from_tag * NUM_PKTS, self.pg1) self.assert_same_mac_addr(pkt_from_tag, rx) self.assert_has_no_tag(rx) rx = self.send_and_expect(self.pg3, pkt_from_to_tag * NUM_PKTS, self.pg2) self.assert_same_mac_addr(pkt_from_tag, rx) self.assert_has_vlan_tag(92, rx) # # but broadcast packets are still flooded # self.send_and_expect(self.pg0, pkt_bcast * 33, self.pg2) # # cleanup # self.vapi.l2_emulation(self.pg0.sw_if_index, enable=0) self.vapi.l2_emulation(self.pg1.sw_if_index, enable=0) self.vapi.l2_emulation(sub_if_on_pg2.sw_if_index, enable=0) self.vapi.l2_emulation(sub_if_on_pg3.sw_if_index, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg0.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg2.sw_if_index, bd_id=1, enable=0) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=sub_if_on_pg3.sw_if_index, bd_id=1, enable=0) route_1.remove_vpp_config() route_2.remove_vpp_config() sub_if_on_pg3.remove_vpp_config() sub_if_on_pg2.remove_vpp_config() if __name__ == '__main__': unittest.main(testRunner=VppTestRunner)