Report: Updated static front matter for new pkt latency graphs.

Change-Id: I68fad80a7d83b91124402c22abd803e1a2cff3bc
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
(cherry picked from commit 69c47b5c3861754d0e3a95515685bf3a19c794e8)

11 files changed, 46 insertions, 40 deletions

diff --git a/docs/report/dpdk_performance_tests/packet_latency/3n-hsw-xl710.rst b/docs/report/dpdk_performance_tests/packet_latency/3n-hsw-xl710.rst
index eaba7c0cb8..96c02743db 100644
--- a/docs/report/dpdk_performance_tests/packet_latency/3n-hsw-xl710.rst
+++ b/docs/report/dpdk_performance_tests/packet_latency/3n-hsw-xl710.rst
@@ -31,9 +31,6 @@
 3n-hsw-xl710
 ~~~~~~~~~~~~
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/dpdk/perf?h=rls2001>`_.
 
diff --git a/docs/report/dpdk_performance_tests/packet_latency/index.rst b/docs/report/dpdk_performance_tests/packet_latency/index.rst
index 9331855816..4432fc2099 100644
--- a/docs/report/dpdk_performance_tests/packet_latency/index.rst
+++ b/docs/report/dpdk_performance_tests/packet_latency/index.rst
@@ -6,21 +6,36 @@
 Packet Latency
 ==============
 
-.. todo::
-    Introduction
+DPDK Testpmd and L3fwd latency results are generated based on the test
+data obtained from |csit-release| NDR-PDR throughput tests executed
+across physical testbeds hosted in LF FD.io labs: 3n-hsw, 3n-skx, 2n-
+skx, 2n-clx, 3n-dnv, 2n-dnv, 3n-tsh.
+
+Latency by percentile distribution plots are used to show packet latency
+percentiles at different packet rate load levels: i) No-Load latency
+streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv)
+High-Load at 90% PDR.
+
+Additional information about graph data:
+
+#. **Graph Title**: describes tested DUT packet path.
+
+#. **X-axis Labels**: percentile of packets.
+
+#. **Y-axis Labels**: measured one-way packet latency values in [uSec].
+
+#. **Graph Legend**: list of latency tests at different packet rate load
+   level.
+
+#. **Hover Information**: packet rate load level, stream direction
+   (East-West, West-East), percentile, one-way latency.
 
 .. note::
 
     Test results have been generated by
-    `FD.io test executor dpdk performance job 2n-skx`_,
-    `FD.io test executor dpdk performance job 3n-skx`_,
-    `FD.io test executor dpdk performance job 2n-clx`_, and
     `FD.io test executor dpdk performance job 3n-hsw`_ with RF
     result files csit-dpdk-perf-|srelease|-\*.zip
     `archived here <../../_static/archive/>`_.
-    Required per test case data set size is **10** and for DPDK tests
-    this is the actual size, as all scheduled test executions completed
-    successfully.
 
 .. toctree::
     :maxdepth: 3
diff --git a/docs/report/vpp_performance_tests/packet_latency/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency/container_memif.rst
index ac6033f9df..a24de3551a 100644
--- a/docs/report/vpp_performance_tests/packet_latency/container_memif.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/container_memif.rst
@@ -6,9 +6,6 @@
 LXC/DRC Container Memif
 =======================
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/container_memif?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/index.rst b/docs/report/vpp_performance_tests/packet_latency/index.rst
index 8e25417148..c9614e2fed 100644
--- a/docs/report/vpp_performance_tests/packet_latency/index.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/index.rst
@@ -7,15 +7,33 @@
 Packet Latency
 ==============
 
-.. todo::
-    Introduction
+VPP latency results are generated based on the test data obtained from
+|csit-release| NDR-PDR throughput tests executed across physical
+testbeds hosted in LF FD.io labs: 3n-hsw, 3n-skx, 2n- skx, 2n-clx,
+3n-dnv, 2n-dnv, 3n-tsh.
+
+Latency by percentile distribution plots are used to show packet latency
+percentiles at different packet rate load levels: i) No-Load latency
+streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv)
+High-Load at 90% PDR.
+
+Additional information about graph data:
+
+#. **Graph Title**: describes tested DUT packet path.
+
+#. **X-axis Labels**: percentile of packets.
+
+#. **Y-axis Labels**: measured one-way packet latency values in [uSec].
+
+#. **Graph Legend**: list of latency tests at different packet rate load
+   level.
+
+#. **Hover Information**: packet rate load level, stream direction
+   (East-West, West-East), percentile, one-way latency.
 
 .. note::
 
     Test results have been generated by
-    `FD.io test executor vpp performance job 2n-skx`_,
-    `FD.io test executor vpp performance job 3n-skx`_,
-    `FD.io test executor vpp performance job 2n-clx`_,
     `FD.io test executor vpp performance job 3n-hsw`_ and
     `FD.io test executor vpp performance job 3n-tsh`_ with RF
     result files csit-vpp-perf-|srelease|-\*.zip
diff --git a/docs/report/vpp_performance_tests/packet_latency/ip4.rst b/docs/report/vpp_performance_tests/packet_latency/ip4.rst
index 5392f11fc7..ca1d9b8abe 100644
--- a/docs/report/vpp_performance_tests/packet_latency/ip4.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/ip4.rst
@@ -6,9 +6,6 @@
 IPv4 Routing
 ============
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_latency/ip4_tunnels.rst
index de5e586a50..3b22191ff1 100644
--- a/docs/report/vpp_performance_tests/packet_latency/ip4_tunnels.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/ip4_tunnels.rst
@@ -6,9 +6,6 @@
 IPv4 Tunnels
 ============
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip4_tunnels?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/ip6.rst b/docs/report/vpp_performance_tests/packet_latency/ip6.rst
index 58c049f042..f48dd5db3c 100644
--- a/docs/report/vpp_performance_tests/packet_latency/ip6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/ip6.rst
@@ -6,9 +6,6 @@
 IPv6 Routing
 ============
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/ip6?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/ipsec.rst b/docs/report/vpp_performance_tests/packet_latency/ipsec.rst
index 7bb46ba460..636baf88c6 100644
--- a/docs/report/vpp_performance_tests/packet_latency/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/ipsec.rst
@@ -6,9 +6,6 @@
 IPSec IPv4 Routing
 ==================
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/l2.rst b/docs/report/vpp_performance_tests/packet_latency/l2.rst
index 73e696fe51..724c5da4e8 100644
--- a/docs/report/vpp_performance_tests/packet_latency/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/l2.rst
@@ -6,9 +6,6 @@
 L2 Ethernet Switching
 =====================
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/l2?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/srv6.rst b/docs/report/vpp_performance_tests/packet_latency/srv6.rst
index cdbf7cccc5..c76916abc2 100644
--- a/docs/report/vpp_performance_tests/packet_latency/srv6.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/srv6.rst
@@ -6,9 +6,6 @@
 SRv6 Routing
 ============
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/srv6?h=rls2001>`_.
 
diff --git a/docs/report/vpp_performance_tests/packet_latency/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_latency/vm_vhost.rst
index c336c9280e..97cb935bc8 100644
--- a/docs/report/vpp_performance_tests/packet_latency/vm_vhost.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/vm_vhost.rst
@@ -8,9 +8,6 @@
 KVM VMs vhost-user
 ==================
 
-.. todo::
-    Introduction
-
 CSIT source code for the test cases used for plots can be found in
 `CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/vm_vhost?h=rls2001>`_.