aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xbootstrap-verify-perf.sh19
-rw-r--r--bootstrap-vpp-verify-nightly.sh408
2 files changed, 0 insertions, 427 deletions
diff --git a/bootstrap-verify-perf.sh b/bootstrap-verify-perf.sh
deleted file mode 100755
index afcfd1eca9..0000000000
--- a/bootstrap-verify-perf.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/env bash
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -exuo pipefail
-
-# TODO: Delete this file, perhaps replacing it with a symlink.
-here=$(dirname $(readlink -e "${BASH_SOURCE[0]}"))
-source "${here}/resources/libraries/bash/entry/bootstrap_verify_perf.sh"
diff --git a/bootstrap-vpp-verify-nightly.sh b/bootstrap-vpp-verify-nightly.sh
deleted file mode 100644
index 927eca83f0..0000000000
--- a/bootstrap-vpp-verify-nightly.sh
+++ /dev/null
@@ -1,408 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a ght (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not usecopy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -x
-
-cat /etc/hostname
-cat /etc/hosts
-
-ARCHIVE_ARTIFACTS=(log.html output.xml report.html)
-
-SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-export PYTHONPATH=${SCRIPT_DIR}
-
-# Create tmp dir
-mkdir ${SCRIPT_DIR}/tmp
-
-# Use tmp dir for tarballs
-export TMPDIR="${SCRIPT_DIR}/tmp"
-
-# Use tmp dir to store log files
-LOG_PATH="$TMPDIR"
-
-if [ -f "/etc/redhat-release" ]; then
- DISTRO="CENTOS"
- sudo yum install -y python-devel python-virtualenv openssh-clients sshpass
- PACKAGE=rpm
-else
- DISTRO="UBUNTU"
- export DEBIAN_FRONTEND=noninteractive
- sudo apt-get -y update
- sudo apt-get -y install libpython2.7-dev python-virtualenv
- PACKAGE=deb
-fi
-
-# 1st step: Download and prepare VPP packages
-
-# Temporarily download VPP packages from nexus.fd.io
-if [ "${#}" -ne "0" ]; then
- arr=(${@})
- echo ${arr[0]}
-else
- # Download the latest VPP build install packages
- rm -f *.${PACKAGE}
- echo Downloading VPP packages...
- CSIT_DIR=${SCRIPT_DIR}
- source "${SCRIPT_DIR}/resources/libraries/bash/function/artifacts.sh"
- download_artifacts
- # Need to revert -euo as the rest of script is not optimized for this.
- set +euo pipefail
-fi
-
-# Take vpp package and get the vpp version
-VPP_PKGS=(*.$PACKAGE)
-case "$DISTRO" in
- CENTOS )
- VPP_VER="$( expr match $(ls *.rpm | head -n 1) 'vpp-\(.*\).rpm' )"
- ;;
- UBUNTU )
- VPP_VER="$( expr match $(ls *.deb | head -n 1) 'vpp-\(.*\)-deb.deb' )"
-esac
-
-echo ${VPP_PKGS[@]}
-
-set +x
-echo "****************************************************************************************************************************************"
-echo "1st step: Download VPP packages FINISHED"
-echo "VPP version to be tested: ${VPP_VER}"
-echo "****************************************************************************************************************************************"
-set -x
-
-
-# 2nd step: Start virtual env and install requirements
-
-echo Starting virtual env...
-virtualenv --system-site-packages env
-. env/bin/activate
-
-echo Installing requirements...
-pip install -r ${SCRIPT_DIR}/requirements.txt
-
-set +x
-echo "****************************************************************************************************************************************"
-echo "2nd step: Start virtual env and install requirements FINISHED"
-echo "****************************************************************************************************************************************"
-set -x
-
-
-# 3rd step: Prepare VIRL system
-echo Preparing VIRL system...
-
-VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
-IPS_PER_VIRL=( "10.30.51.28:252"
- "10.30.51.29:74"
- "10.30.51.30:74" )
-SIMS_PER_VIRL=( "10.30.51.28:13"
- "10.30.51.29:13"
- "10.30.51.30:13" )
-IPS_PER_SIMULATION=5
-
-function get_max_ip_nr() {
- virl_server=$1
- IP_VALUE="0"
- for item in "${IPS_PER_VIRL[@]}" ; do
- if [ "${item%%:*}" == "${virl_server}" ]
- then
- IP_VALUE=${item#*:}
- break
- fi
- done
- echo "$IP_VALUE"
-}
-
-function get_max_sim_nr() {
- virl_server=$1
- SIM_VALUE="0"
- for item in "${SIMS_PER_VIRL[@]}" ; do
- if [ "${item%%:*}" == "${virl_server}" ]
- then
- SIM_VALUE=${item#*:}
- break
- fi
- done
- echo "$SIM_VALUE"
-}
-
-VIRL_USERNAME=jenkins-in
-VIRL_PKEY=priv_key
-VIRL_SERVER_STATUS_FILE="status"
-VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
-
-SKIP_PATCH="skip_patchORskip_vpp_patch"
-
-case "$DISTRO" in
- CENTOS )
- VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_CENTOS)
- VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_CENTOS)
- NON_CRITICAL_TESTS="expected_failingORvm"
- ;;
- UBUNTU )
- VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_UBUNTU)
- VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_UBUNTU)
- NON_CRITICAL_TESTS="EXPECTED_FAILING"
- ;;
-esac
-
-SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
-
-function ssh_do() {
- echo
- echo "### " ssh $@
- ssh ${SSH_OPTIONS} $@
-}
-
-rm -f ${VIRL_PKEY}
-cat > ${VIRL_PKEY} <<EOF
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6
-GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX
-VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9
-asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz
-L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J
-73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76
-gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb
-4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN
-e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV
-SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J
-kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI
-ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa
-MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY
-RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa
-YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0
-2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab
-UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV
-IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I
-wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS
-NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM
-xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj
-yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS
-U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ
-cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh
-maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E=
------END RSA PRIVATE KEY-----
-EOF
-chmod 600 ${VIRL_PKEY}
-
-#
-# The server must be reachable and have a "status" file with
-# the content "PRODUCTION" to be selected.
-#
-# If the server is not reachable or does not have the correct
-# status remove it from the array and start again.
-#
-# Abort if there are no more servers left in the array.
-#
-VIRL_PROD_SERVERS=()
-for index in "${!VIRL_SERVERS[@]}"; do
- virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} cat $VIRL_SERVER_STATUS_FILE 2>&1)
- echo VIRL HOST ${VIRL_SERVERS[$index]} status is \"$virl_server_status\"
- if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
- then
- # Candidate is in good status. Add to array.
- VIRL_PROD_SERVERS+=(${VIRL_SERVERS[$index]})
- fi
-done
-
-VIRL_SERVERS=("${VIRL_PROD_SERVERS[@]}")
-echo "VIRL servers in production: ${VIRL_SERVERS[@]}"
-num_hosts=${#VIRL_SERVERS[@]}
-if [ $num_hosts == 0 ]
-then
- echo "No more VIRL candidate hosts available, failing."
- exit 127
-fi
-
-# Get the LOAD of each server based on number of active simulations (test cases)
-VIRL_SERVER_LOAD=()
-for index in "${!VIRL_SERVERS[@]}"; do
- VIRL_SERVER_LOAD[${index}]=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} "list-testcases | grep session | wc -l")
-done
-
-# Pick the least loaded server
-VIRL_SERVER=""
-least_load_server_idx=$(echo "${VIRL_SERVER_LOAD[*]}" | tr -s ' ' '\n' | awk '{print($0" "NR)}' | sort -g -k1,1 | head -1 | cut -f2 -d' ')
-least_load_server=${VIRL_SERVERS[$least_load_server_idx-1]}
-VIRL_SERVER=($least_load_server)
-
-echo "Selected VIRL servers: ${VIRL_SERVER[@]}"
-
-VIRL_DIR_LOC="/tmp"
-VPP_PKGS_VIRL=(${VPP_PKGS[@]})
-
-# Prepend directory location at remote host to package file list
-for index in "${!VPP_PKGS_VIRL[@]}"; do
- VPP_PKGS_VIRL[${index}]=${VIRL_DIR_LOC}/${VPP_PKGS_VIRL[${index}]}
-done
-
-echo "Updated file names: " ${VPP_PKGS_VIRL[@]}
-
-cat ${VIRL_PKEY}
-# Copy the files to VIRL host
-scp ${SSH_OPTIONS} *.${PACKAGE} \
- ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/
-
-result=$?
-if [ "${result}" -ne "0" ]; then
- echo "Failed to copy vpp package files to virl host"
- echo ${result}
- exit ${result}
-fi
-
-function stop_virl_simulation {
- ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
- "stop-testcase ${VIRL_SID}"
-}
-
-# Upon script exit, cleanup the VIRL simulation execution
-trap stop_virl_simulation EXIT
-
-# Start a simulation on VIRL server
-echo "Starting simulation on VIRL server"
-
-# Get given VIRL server limits for max. number of VMs and IPs
-max_ips=$(get_max_ip_nr ${VIRL_SERVER})
-max_ips_from_sims=$(($(get_max_sim_nr ${VIRL_SERVER[${index}]})*IPS_PER_SIMULATION))
-# Set quota to lower value
-IP_QUOTA=$([ $max_ips -le $max_ips_from_sims ] && echo "$max_ips" || echo "$max_ips_from_sims")
-
-# Start the simulation
-VIRL_SID=$(ssh ${SSH_OPTIONS} \
- ${VIRL_USERNAME}@${VIRL_SERVER} \
- "start-testcase -vv --quota ${IP_QUOTA} --copy ${VIRL_TOPOLOGY} \
- --release ${VIRL_RELEASE} ${VPP_PKGS_VIRL[@]}")
-retval=$?
-if [ ${retval} -ne "0" ]; then
- echo "VIRL simulation start failed on ${VIRL_SERVER}"
- exit ${retval}
-fi
-
-if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
- echo "No VIRL session ID reported."
- exit 127
-fi
-
-echo ${VIRL_SID}
-
-ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
-
-# Download the topology file from VIRL session
-scp ${SSH_OPTIONS} \
- ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
- topologies/enabled/topology_VIRL.yaml
-
-retval=$?
-if [ ${retval} -ne "0" ]; then
- echo "Failed to copy topology file from VIRL simulation"
- exit ${retval}
-fi
-
-set +x
-echo "****************************************************************************************************************************************"
-echo "3rd step: Start the simulation on the VIRL server FINISHED"
-echo "****************************************************************************************************************************************"
-set -x
-
-
-# 4th step: Run functional test suites
-
-pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \
- -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \
- -d ${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \
- -vvv
-if [ "$?" -ne "0" ]; then
- echo "Topology schema validation failed."
- echo "However, the tests will start."
-fi
-
-echo Running functional tests on the VIRL system...
-
-echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\
- -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \
- --suite "tests.func" \
- --include vm_envAND3_node_single_link_topo \
- --include vm_envAND3_node_double_link_topo \
- --exclude PERFTEST \
- --exclude ${SKIP_PATCH} \
- --noncritical ${NON_CRITICAL_TESTS} \
- --outputdir ${LOG_PATH} \
- tests/"
-
-PYTHONPATH=`pwd` pybot -L TRACE -W 136\
- -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \
- --suite "tests.func" \
- --include vm_envAND3_node_single_link_topo \
- --include vm_envAND3_node_double_link_topo \
- --exclude PERFTEST \
- --exclude ${SKIP_PATCH} \
- --noncritical ${NON_CRITICAL_TESTS} \
- --outputdir ${LOG_PATH} \
- tests/
-RC=$(echo $?)
-
-set +x
-echo "****************************************************************************************************************************************"
-echo "4th step: Run functional tests FINISHED"
-echo "****************************************************************************************************************************************"
-set -x
-
-# Log the final result
-if [ ${RC} -eq 0 ]; then
- RETURN_STATUS=0
- set +x
- echo
- echo "========================================================================================================================================"
- echo "Final result of all tests: | PASS |"
- echo "All critical tests have passed."
- echo "========================================================================================================================================"
- echo
- set -x
-elif [ ${MORE_FAILS} -eq 0 ]; then
- RETURN_STATUS=1
- if [ ${RC} -eq 1 ]; then
- HLP_STR="test has"
- else
- HLP_STR="tests have"
- fi
- set +x
- echo
- echo "========================================================================================================================================"
- echo "Final result of all tests: | FAIL |"
- echo "${RC} critical ${HLP_STR} failed."
- echo "========================================================================================================================================"
- echo
- set -x
-else
- RETURN_STATUS=1
- set +x
- echo
- echo "========================================================================================================================================"
- echo "Final result of all tests: | FAIL |"
- echo "More then 250 critical tests have failed in one test loop."
- echo "========================================================================================================================================"
- echo
- set -x
-fi
-
-
-# 5th step: Archive artifacts
-mkdir archive
-for i in ${ARCHIVE_ARTIFACTS[@]}; do
- cp $( readlink -f ${LOG_PATH}/${i} | tr '\n' ' ' ) archive/
-done
-
-echo Log files copied to archive directory.
-
-exit ${RETURN_STATUS}