aboutsummaryrefslogtreecommitdiffstats
path: root/resources/tools
diff options
context:
space:
mode:
Diffstat (limited to 'resources/tools')
-rw-r--r--resources/tools/testbed-setup/README.md37
-rw-r--r--resources/tools/testbed-setup/ansible/production30
-rwxr-xr-x[-rw-r--r--]resources/tools/testbed-setup/cimc/cimc.py0
3 files changed, 33 insertions, 34 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md
index ad9b400126..b4f376b96e 100644
--- a/resources/tools/testbed-setup/README.md
+++ b/resources/tools/testbed-setup/README.md
@@ -32,9 +32,6 @@ is available on the PXE bootstrap server in ~testuser/host-setup.
- `sudo service isc-dhcp-server restart`
- `cd ~testuser/host-setup`
- `sudo mkdir /mnt/cdrom`
- - Ubuntu Xenial
- - `wget 'http://releases.ubuntu.com/16.04.2/ubuntu-16.04.2-server-amd64.iso'`
- - `sudo mount -o loop ubuntu-16.04.2-server-amd64.iso /mnt/cdrom/`
- Ubuntu Bionic
- `wget 'http://cdimage.ubuntu.com/ubuntu/releases/18.04/release/ubuntu-18.04-server-amd64.iso'`
- `sudo mount -o loop ubuntu-18.04-server-amd64.iso /mnt/cdrom/`
@@ -65,31 +62,31 @@ is available on the PXE bootstrap server in ~testuser/host-setup.
### Bootstrap the host
-Optional: From PXE boostrap server in case of installing Haswell
+Convenient way to re-stage host via script:
+
+ `sudo ./bootstrap_setup_testbed.sh <linux_ip> <mgmt_ip> <username> <pass>`
+
+Optional: CIMC - From PXE boostrap server
- - `cd resources/tools/testbed-setup/cimc`
- Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i`
- Adjust BIOS settings
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />'`
- - add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
- - Reboot server with boot from PXE (restart immediately)
- - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe`
-
-Optional: If RAID is not created on Haswells. Execute while Ubuntu install is running
-
- - create RAID array. Reboot if needed.
+ - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
+ - If RAID is not created in CIMC. Create RAID array. Reboot.
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe`
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]'`
Alternatively, create the RAID array manually.
-
- - Set the next boot from HDD (without restart)
+ - Reboot server with boot from PXE (restart immediately)
+ - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe`
+ - Set the next boot from HDD (without restart) Execute while Ubuntu install is running.
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd`
-Optional: If installing Skylake machine
+Optional: IPMI - From PXE boostrap server
- Get MAC address of LAN0
- `ipmitool -U ADMIN -H $HOST_ADDRESS raw 0x30 0x21 | tail -c 18`
+ - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf)
- Reboot into PXE for next boot only
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN chassis bootdev pxe`
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN power reset`
@@ -97,14 +94,15 @@ Optional: If installing Skylake machine
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol activate`
- `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol deactivate`
-
When installation is finished:
- Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x`
- Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit`
- Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible`
- - Edit production file and uncomment servers that are supposed to be installed: `ansible-playbook --ask-become-pass --inventory production site.yaml --list-hosts`
- - Run ansible on selected hosts: `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml`
+ - Edit production file and uncomment servers that are supposed to be
+ installed.
+ - Run ansible on selected hosts:
+ `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml`
For non-VIRL hosts, stop here.
@@ -158,4 +156,5 @@ Back on the PXE bootstrap server:
`ansible-playbook 04-disk-image.yaml`
-The VIRL host should now be operational. Test, and when ready, create a ~jenkins-in/status file with the appropriate status.
+The VIRL host should now be operational. Test, and when ready, create a
+~jenkins-in/status file with the appropriate status.
diff --git a/resources/tools/testbed-setup/ansible/production b/resources/tools/testbed-setup/ansible/production
index f2364031b6..465796546e 100644
--- a/resources/tools/testbed-setup/ansible/production
+++ b/resources/tools/testbed-setup/ansible/production
@@ -1,20 +1,20 @@
all:
children:
-# haswell:
-# children:
-# tg:
-# hosts:
-# 10.30.51.16: null #t1-tg1
-# 10.30.51.20: null #t2-tg1
-# 10.30.51.24: null #t3-tg1
-# sut:
-# hosts:
-# 10.30.51.17: null #t1-sut1
-# 10.30.51.18: null #t1-sut2
-# 10.30.51.21: null #t2-sut1
-# 10.30.51.22: null #t2-sut2
-# 10.30.51.25: null #t3-sut1
-# 10.30.51.26: null #t3-sut2
+ haswell:
+ children:
+ tg:
+ hosts:
+ 10.30.51.16: null #t1-tg1
+ 10.30.51.20: null #t2-tg1
+ 10.30.51.24: null #t3-tg1
+ sut:
+ hosts:
+ 10.30.51.17: null #t1-sut1
+ 10.30.51.18: null #t1-sut2
+ 10.30.51.21: null #t2-sut1
+ 10.30.51.22: null #t2-sut2
+ 10.30.51.25: null #t3-sut1
+ 10.30.51.26: null #t3-sut2
# virl: # WARNING, DO NOT ENABLE VIRL UNLESS YOU KNOW WHAT YOU ARE DOING
# hosts:
# 10.30.51.28: null #t4-virl1
diff --git a/resources/tools/testbed-setup/cimc/cimc.py b/resources/tools/testbed-setup/cimc/cimc.py
index 2e0fc42a25..2e0fc42a25 100644..100755
--- a/resources/tools/testbed-setup/cimc/cimc.py
+++ b/resources/tools/testbed-setup/cimc/cimc.py